عرض الصيف: خصم 20% على التنظيف العميق للتكييف — احجز قبل 30 يونيواحجز الآن
انتقل إلى المحتوى

المواصفات

SKU
FX-D-004
الفئة
الدهانات والطلاءات
الوحدة
m²
Use
Floors, Walls, Showers, Furniture
Finish
Smooth, Medium, Coarse
Sealer
Matt, Satin

التوصيل والتركيب

  • توصيل محلي سريع
  • تركيب احترافي
  • يشمل الضمان

اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر

نقبل الإرجاع خلال 7 يومًا من التسليم، ويتحمل العميل تكلفة شحن الإرجاع.

احجز التركيب

المستندات

الدهانات والطلاءاتوفّر 14%المتوفر: 500

نظام مايكروسمنت سلس للأرضيات والجدران، توريد وتطبيق، لكل m²

AED 336.00AED 388.50

الأسعار تشمل ضريبة القيمة المضافة بنسبة 5%. · SKU: FX-D-004

Use
Finish
Sealer

اختر الخيار الذي تفضّله واذكره في ملاحظات الطلب أو عبر WhatsApp — نؤكد التوفر قبل الإرسال.

اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر

مايكروسمنت سلس بسماكة 2–3 mm للأرضيات والجدران والدشات ووحدات الحمام، يُطبق فوق البلاط القائم بفرق مدربة ويُعزل لمنازل الإمارات.

اسأل عن هذا المنتجاطلب عرض سعر لهذا المنتج

إجابة سريعة

مايكروسمنت سلس بسماكة 2–3 mm للأرضيات والجدران والدشات ووحدات الحمام، يُطبق فوق البلاط القائم بفرق مدربة ويُعزل لمنازل الإمارات. Microcement is a thin, seamless cement-based coating, around 2–3 mm thick, that can cover floors, walls, showers, stairs and vanities in one continuous surface with no grout lines.

حقائق رئيسية

  • This system is supplied and applied by trained FIXORA Decor crews from an indicative AED 320 per m² in 2026, excluding 5% VAT.
  • A typical bathroom takes five to seven working days; a 60 m² living area about a week, excluding furniture moving.
  • Scope Indicative 2026 range (AED, excl.
  • Floors, large open areas 320 – 420 per m²

آخر تحديث:

الوصف

Microcement is a thin, seamless cement-based coating, around 2–3 mm thick, that can cover floors, walls, showers, stairs and vanities in one continuous surface with no grout lines. In Dubai it is popular for modern villa and apartment renovations because it can usually be applied directly over existing, sound tiles, saving demolition, dust and time. This system is supplied and applied by trained FIXORA Decor crews from an indicative AED 320 per m² in 2026, excluding 5% VAT.

Searches such as "microcement Dubai price", "microcement bathroom UAE" and "microcement over tiles" have grown as owners look for a minimalist, hotel-style finish. Microcement looks simple, but it is a multi-layer system that relies on skilled hands and correct sealing. This guide explains what the system includes, where it works best in UAE homes, how it is applied, what it costs and how it compares with porcelain, epoxy and polished concrete.

Microcement system overview

Microcement is a blend of cement, fine aggregates, polymers and pigments. It is applied by trowel in thin layers, each sanded before the next, and finally protected with a sealer. Because it is so thin, it adds almost nothing to floor height, which is a big advantage in apartments where door clearances and transitions to other rooms are tight. Because it is continuous, it gives a calm, gallery-like look and makes small bathrooms feel bigger.

Our system has five stages: primer, reinforcing mesh embedded in a base coat, a second base coat, two finishing coats, and a two-component sealer. Wet areas receive an additional waterproofing membrane underneath.

Who microcement is for

  • Apartment owners in Downtown, Dubai Marina, JVC and Business Bay renovating without the noise and time of tile removal.
  • Villa owners wanting seamless flow from living areas to terraces' indoor edges, stairs and bathrooms.
  • Bathroom renovations seeking a walk-in shower with continuous walls and floor.
  • Retail, cafés and showrooms wanting an industrial or minimalist look.
  • Furniture and joinery: vanity tops, kitchen islands, benches and built-in seating.

Microcement is not ideal if you want a perfectly uniform colour (it is handmade and shows natural cloud and trowel marks), if you are on a very tight budget, or if the substrate is moving, cracked or hollow.

Specifications

PropertyDetail
Total thicknessApproximately 2–3 mm
LayersPrimer, mesh and two base coats, two finish coats, sealer
TexturesSmooth, medium and coarse (more grip)
SealerTwo-component water-based polyurethane, matt or satin
SubstratesSound tiles, screed, cement board, plaster, gypsum board (walls)
ColoursWide palette of greys, whites, beiges and earth tones; custom tints
Wet areasYes, with waterproof membrane and correct sealing
OutdoorsShaded areas only with exterior-grade system; not recommended on sun-exposed decks
Sold bySquare metre, supplied and applied

Textures, colours and variants

  • Smooth: silky, refined, ideal for walls and furniture.
  • Medium: the standard floor finish, balancing look and grip.
  • Coarse: recommended for shower floors and areas where bare feet and water meet.
  • Matt or satin sealer: matt looks most natural; satin is slightly easier to wipe.
  • Colours: warm greys and sand tones are the most popular in UAE homes because they hide dust and complement wood and brass.

We prepare sample boards in your chosen colour and texture before work starts, because the final appearance depends on the applicator's hand and the light in your room.

UAE climate suitability

Inside air-conditioned homes, microcement performs well. It tolerates humidity once sealed and does not swell. The main climate considerations are:

  • Application conditions: microcement must be applied within the manufacturer's temperature and humidity range. In summer we keep the AC running during application and curing so the layers do not dry too fast and crack.
  • Sun exposure: intense UV and very high surface temperatures on unshaded outdoor areas can stress the sealer and cause colour change, so we do not recommend it for open pool decks or sun-baked terraces.
  • Sand and grit: desert dust scratches the sealer over time. Entrance mats and regular dry mopping prolong the finish, and the sealer can be refreshed.
  • Water: showers are fine with a membrane, coarse texture and good falls to the drain. Hard UAE water leaves limescale, which needs gentle, neutral cleaning rather than acidic products.

Installation process

  1. Survey: we tap-test existing tiles, check for cracks and movement, measure moisture in screeds, and agree on the scope, colour and texture.
  2. Preparation: loose tiles are re-fixed, cracked areas repaired, the surface degreased and lightly abraded. Hollow areas must be fixed or the microcement will crack above them.
  3. Waterproofing in wet areas: a flexible membrane is applied to shower floors and walls.
  4. Primer and mesh: primer improves adhesion; a fibreglass mesh embedded in the first base coat bridges old grout lines and limits cracking.
  5. Base and finish coats: layers are troweled and sanded, with drying time between each.
  6. Sealing: two or three coats of sealer protect against stains and water.

A typical bathroom takes five to seven working days; a 60 m² living area about a week, excluding furniture moving. Light foot traffic is possible after a couple of days and full use once the sealer has cured, usually around a week. Building management approval and working hours apply in most towers and communities.

Design ideas for microcement in UAE homes

Seamless walk-in shower

A frameless glass panel, a linear drain against the wall and microcement running from floor to ceiling creates a calm, spa-like shower. Built-in niches are coated in the same finish, so there are no tile edges to clean. A warm sand tone with brushed brass fittings is a popular pairing in Dubai Hills and Arabian Ranches villas.

Open-plan living and kitchen

In apartments in Downtown or City Walk, a single microcement floor across living, dining and kitchen zones removes thresholds and makes the space feel larger. A slightly darker grey hides everyday dust from balconies, while lighter greige tones keep compact units bright.

Stairs and floating vanities

Microcement wraps around stair treads and risers without nosings or joints, which suits contemporary villas. In bathrooms, vanity tops and floating shelves coated in matching microcement give a sculpted, monolithic look.

Combining with other materials

Microcement pairs well with oak joinery, fluted glass, natural stone basins and lime-plaster walls. Avoid combining too many textures in a small room; one or two natural materials alongside microcement usually look most balanced.

Maintenance and care

  • Clean with water and a pH-neutral cleaner. Avoid bleach, ammonia, vinegar and descalers.
  • Wipe oil, wine, coffee and turmeric spills promptly, especially in kitchens.
  • Use felt pads under furniture and avoid dragging heavy items.
  • Squeegee showers after use to reduce limescale.
  • Reseal busy floors every few years, or when the surface starts to look dull.

Microcement vs porcelain, epoxy and polished concrete

FactorMicrocementLarge porcelainEpoxy coatingPolished concrete
JointsNoneMinimalNoneSaw cuts
Thickness added2–3 mm10–15 mm1–3 mmStructural slab
Over existing tilesYes, if soundOftenYes, mainly commercialNo
Walls and showersYesYesRarelyNo
LookHandmade, softUniform, printedGlossy, syntheticIndustrial
RepairabilityPatchable, may showReplace tileRecoatRegrind

Microcement wins where seamless continuity, thinness and a soft handcrafted look are priorities. Porcelain is more forgiving of heavy use and easier to repair cleanly. Epoxy suits garages and warehouses better than homes.

Price guidance and what affects it

ScopeIndicative 2026 range (AED, excl. VAT)
Floors, large open areas320 – 420 per m²
Walls300 – 400 per m²
Shower and bathroom incl. membrane380 – 520 per m²
StairsPer step, typically 350 – 650
Vanity, island or bench claddingQuoted per item
Minimum job chargeApplies to small areas
  • Substrate repair: hollow tiles and cracks add labour.
  • Area size: small bathrooms cost more per m² because the crew still needs the same number of visits.
  • Details: niches, steps, edges and drains take time.
  • Brand of system: premium European systems cost more than generic ones.
  • VAT: 5% added on the invoice.

Warranty notes

Microcement products are covered by the manufacturer against material defects when applied according to their specification. Workmanship, such as delamination or sealer failure from incorrect application, is covered by FIXORA Decor under the quotation terms. Hairline cracks caused by structural movement or by movement in the underlying tiles, natural shade variation, trowel marks, and damage from acids, impacts or lack of resealing are outside warranty. Expect a handcrafted surface, not a factory-uniform one.

Key takeaways

  • Microcement is a seamless, 2–3 mm, multi-layer system for floors, walls and showers.
  • It can usually go over sound existing tiles, avoiding demolition.
  • Correct preparation, mesh, membrane and sealing determine longevity.
  • Budget roughly AED 320–520 per m² supplied and applied, before VAT.

Frequently asked questions

Can microcement be applied over bathroom tiles?

Yes, if the tiles are firmly bonded and not cracked. We repair loose tiles, apply a waterproof membrane in the shower area and embed mesh to bridge grout lines before the microcement layers.

Does microcement crack?

It can develop hairline cracks if the base moves or has hollow tiles underneath. Good preparation and reinforcing mesh greatly reduce the risk, but no thin cement finish is completely immune to structural movement.

Is microcement slippery in showers?

Smooth microcement can be slippery when wet. For shower floors we use a coarser texture and an anti-slip additive in the sealer.

How long does microcement last?

With correct application and periodic resealing, a microcement finish can last many years. Busy floors need resealing more often than walls.

Is microcement more expensive than tiles?

Per m², it is usually more expensive than standard tiles, but similar to large-format porcelain once installation is included, and it can avoid demolition costs.

Thinking about a seamless bathroom or living area? Send photos of your current floors to FIXORA Decor on WhatsApp +971501962136, or request a quotation. We will check the substrate, bring colour samples and quote a clear supply-and-apply price in Dubai.

الأسئلة الشائعة

Yes, if the tiles are firmly bonded and not cracked. We repair loose tiles, apply a waterproof membrane in the shower area and embed mesh to bridge grout lines before the microcement layers.

It can develop hairline cracks if the base moves or has hollow tiles underneath. Good preparation and reinforcing mesh greatly reduce the risk, but no thin cement finish is completely immune to structural movement.

Smooth microcement can be slippery when wet. For shower floors we use a coarser texture and an anti-slip additive in the sealer.

With correct application and periodic resealing, a microcement finish can last many years. Busy floors need resealing more often than walls.

Per m², it is usually more expensive than standard tiles, but similar to large-format porcelain once installation is included, and it can avoid demolition costs. Thinking about a seamless bathroom or living area? Send photos of your current floors to FIXORA Decor on WhatsApp +971501962136, or request a quotation . We will check the substrate, bring colour samples and quote a clear supply-and-apply price in Dubai.

تقييمات العملاء

لا توجد تقييمات بعد. كن أول من يشارك تجربته.

اكتب تقييمًا

    الأسئلة والأجوبة

    لا توجد أسئلة بعد. كن أول من يسأل.

    قد يعجبك أيضاً

    نخدم