
المواصفات
- SKU
- FX-F-003
- الفئة
- تجهيزات المطابخ
- الوزن
- 3.2 kg
- Type
- pull-down
- Finish
- brushed steel, matt black, gunmetal, brushed gold
- Height
- 420 mm
التوصيل والتركيب
- توصيل محلي سريع
- تركيب احترافي
- يشمل الضمان
اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر
نقبل الإرجاع خلال 7 يومًا من التسليم، ويتحمل العميل تكلفة شحن الإرجاع.
المستندات
افتح على هاتفك
امسح هذا الرمز بكاميرا هاتفك لفتح هذا المنتج.
خلاط مطبخ بذراع سحب مع رأس رش بتثبيت مغناطيسي، ستيل مفرّش
الأسعار تشمل ضريبة القيمة المضافة بنسبة 5%. · SKU: FX-F-003
اختر الخيار الذي تفضّله واذكره في ملاحظات الطلب أو عبر WhatsApp — نؤكد التوفر قبل الإرسال.
اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر
خلاط مطبخ عالي القوس بذراع واحدة ورأس سحب بوضعي رش وتثبيت مغناطيسي وخرطوشة سيراميك وجسم نحاسي صلب بتشطيب ستيل مفرّش.
أضف إلى قائمة
سجّل الدخول لاستخدام هذااسأل عن هذا المنتجاطلب عرض سعر لهذا المنتج
إجابة سريعة
خلاط مطبخ عالي القوس بذراع واحدة ورأس سحب بوضعي رش وتثبيت مغناطيسي وخرطوشة سيراميك وجسم نحاسي صلب بتشطيب ستيل مفرّش. A pull-down kitchen mixer has a high, arched spout with a spray head that pulls straight down into the sink on a hose, so you can rinse large pots, wash vegetables and clean the whole bowl easily.
حقائق رئيسية
- In Dubai, a good-quality pull-down kitchen mixer costs roughly AED 450 to AED 1,500 supplied, depending on body material, finish and cartridge.
- Every few months, unscrew the aerator and soak it in diluted white vinegar for 20 to 30 minutes, then rinse.
- The listed price of AED 690 covers the mixer with hoses and fixings.
آخر تحديث:
الوصف
A pull-down kitchen mixer has a high, arched spout with a spray head that pulls straight down into the sink on a hose, so you can rinse large pots, wash vegetables and clean the whole bowl easily. In Dubai, a good-quality pull-down kitchen mixer costs roughly AED 450 to AED 1,500 supplied, depending on body material, finish and cartridge. This brushed steel model from FIXORA Decor has a solid brass body, a ceramic cartridge and a magnetic dock that holds the spray head firmly in place.
Pull-down kitchen mixer overview
This single-lever mixer controls flow and temperature with one handle, mounted on the side of the body so it does not hit the wall or a window sill when pushed back. The spout stands about 420 mm high with a reach of around 220 mm, which centres water in most single-bowl sinks between 540 and 860 mm wide.
The spray head has two modes: an aerated stream for filling pots and glasses without splashing, and a wide spray for rinsing. A button on the head switches between them. When you let go, a weighted hose retracts the head, and a magnet in the spout pulls it into the docking position with a soft click. This solves the most common complaint about cheap pull-down taps, where the head droops after a few months.
Inside, a 35 mm ceramic disc cartridge provides smooth, drip-free control. The body is cast brass with a PVD brushed steel finish that resists fingerprints and water marks better than polished chrome. All waterways are lead-free.
Who this kitchen mixer is for
- Homeowners with a large single-bowl or undermount sink who want a spray that reaches every corner.
- Families who cook in big pots; the high arc clears tall stockpots and pressure cookers.
- Kitchen renovations in villas and townhouses in Arabian Ranches, Dubai Hills, Town Square and Al Furjan, as part of a full worktop and sink upgrade.
- Apartment owners in JVC, Dubai Marina and Business Bay replacing a basic developer tap that has started dripping or leaking at the base.
- Landlords looking for a durable, modern tap that tenants will not easily break.
It is not ideal under a low wall cabinet or a window that opens inward over the sink; check that you have at least 450 mm of clear height above the worktop.
Specifications
| Property | Detail |
|---|---|
| Type | Single-lever, deck-mounted, pull-down spray |
| Body | Solid cast brass, lead-free waterways |
| Finish | Brushed steel PVD (also black, gunmetal, brushed gold) |
| Height | Approximately 420 mm |
| Spout reach | Approximately 220 mm |
| Spout rotation | 360 degrees |
| Cartridge | 35 mm ceramic disc |
| Spray modes | Aerated stream and wide spray |
| Hose | Braided nylon pull-out hose, approximately 1.5 m |
| Docking | Magnetic |
| Tap hole | Single hole, 32 to 35 mm |
| Connections | Flexible hoses with 1/2-inch connectors for hot and cold |
| Working pressure | Approximately 1 to 5 bar; performs best above 1.5 bar |
Sizes and variants
- Standard high-arc (this model): 420 mm height for most kitchens.
- Compact pull-down: about 330 mm high for use under wall cabinets or in kitchenettes and pantries.
- Professional spring-style: an exposed coil spring with a separate spray arm, popular in large villa kitchens and islands.
- Filter tap version: a three-way mixer with a separate filtered water channel, connected to an under-sink filter so you do not need a second tap hole.
- Finishes: brushed steel, matt black, gunmetal and brushed gold. Matching soap dispensers are available.
UAE water hardness and humidity notes
Hard water in many UAE homes leaves limescale on taps, especially on the spray face and inside the aerator. Our spray head has soft silicone nozzles; rub them with your thumb every week or two to break off scale before it builds up. Every few months, unscrew the aerator and soak it in diluted white vinegar for 20 to 30 minutes, then rinse.
Matt black and brushed finishes show white water marks less clearly than polished chrome, but they still need wiping. Use a soft cloth and plain water or a mild soap; never use limescale cleaners containing strong acids on coloured PVD finishes, because they can dull or patch the coating.
Many villas in Dubai draw water from rooftop or underground tanks, and hot water may come from a tank in a hot loft or roof space. In summer, the cold supply can be very warm. This does not harm the tap, but it means the ceramic cartridge may feel as if it has less temperature range. A whole-house water softener or an under-sink filter improves both taste and scale build-up.
Low pressure is common in some older apartment buildings and in upper floors before a booster pump. If your existing tap already feels weak, tell us before ordering, so we can check pressure and recommend a model with a suitable flow regulator.
Installation
- Check clearances: at least 450 mm clear height and enough room behind the tap for the lever to move fully.
- Isolate water: close the angle valves under the sink or the main valve to the kitchen.
- Remove the old tap and clean the deck surface.
- Mount the new mixer: fit the base gasket, pass hoses through the hole and tighten the mounting nut from below.
- Connect hot and cold to the angle valves. Hot is normally on the left.
- Fit the hose weight at the correct point on the pull-down hose so the head retracts fully.
- Flush and test: remove the aerator, run water to clear debris, refit, and check every joint for leaks.
A straightforward replacement takes our plumber about one hour. If the worktop is stone and needs a new or larger hole, we core-drill it with a diamond bit on site.
Maintenance
- Wipe the body dry after use to prevent water spots.
- Clean nozzles weekly by rubbing them to remove scale.
- Descale the aerator every three months in hard-water areas.
- Check under the sink every six months for drips at hose connections.
- If the lever becomes stiff after a few years, the cartridge can be serviced or replaced without changing the whole tap.
Choosing a finish that matches your kitchen
The tap is small, but it sits at the visual centre of the kitchen, so the finish matters. Brushed steel is the safest choice: it matches stainless sinks, ovens and hoods, and hides water marks well. Matt black works with white quartz and handleless cabinets in a modern Downtown or Dubai Creek Harbour apartment, but shows white limescale spots in hard water if it is not wiped. Gunmetal is a softer alternative to black that pairs well with grey and wood-tone cabinets. Brushed gold suits warm, classic and majlis-inspired interiors and looks best when cabinet handles, lighting and the soap dispenser follow the same tone.
If you are unsure, bring a cabinet door sample or a photo of your worktop to our team and we will show finish samples side by side. Matching the tap to the sink finish usually gives the most coherent result.
Pull-down vs pull-out vs standard kitchen tap
| Type | Best for | Reach of spray | Clearance needed | Indicative supply price (AED) |
|---|---|---|---|---|
| Pull-down (this product) | Deep single bowls, big pots | Excellent | About 450 mm | 450 to 1,500 |
| Pull-out (shorter spout, head pulls toward you) | Low clearance, double bowls | Good | About 300 mm | 350 to 1,000 |
| Fixed spout mixer | Budget, rentals | None | Varies | 180 to 600 |
| Professional spring tap | Islands, large villa kitchens | Excellent | About 500 to 600 mm | 800 to 2,500 |
| Touchless sensor tap | Hygiene, cooks with messy hands | Good | About 400 mm | 1,200 to 3,500 |
Price guidance
The listed price of AED 690 covers the mixer with hoses and fixings. Indicative 2026 extras, depending on scope:
- Plumber fitting a replacement on an existing hole: about AED 150 to AED 300.
- Core-drilling a new hole in quartz or granite: about AED 100 to AED 250.
- New angle valves if the existing ones are seized or leaking: about AED 60 to AED 150 each, fitted.
- Matching soap dispenser: AED 120 to AED 250.
All prices are subject to 5 percent VAT. When combined with a new sink or worktop, fitting is usually included in the package. Use our quote form to price a full sink area upgrade.
Warranty notes
Quality mixers usually carry a manufacturer warranty on the body and cartridge against manufacturing defects, with shorter cover for hoses and spray heads, which are wear parts. Warranties generally exclude limescale damage, finish damage from harsh chemicals, and leaks caused by incorrect installation by others. Our workmanship guarantee covers installation by our team. Keep your invoice; full terms are stated on your quotation.
Key takeaways
- Pull-down mixers suit deep single-bowl and undermount sinks.
- A magnetic dock prevents the drooping head common on cheap taps.
- Check 450 mm clearance and your water pressure before buying.
- Rub the spray nozzles regularly to stop limescale build-up.
- Brushed and PVD finishes hide water marks better than polished chrome.
Frequently asked questions
How much does it cost to replace a kitchen tap in Dubai?
For a mid-range pull-down mixer, expect roughly AED 600 to AED 1,200 including fitting, as an indicative range. Premium finishes, filter taps and stone drilling add to the cost.
Why does my pull-down spray head not go back into place?
Usually the hose weight is in the wrong position, the hose is catching on something in the cabinet, or the docking magnet is weak. Our model uses a strong magnet, and we set the weight correctly when installing.
Will a pull-down tap work with low water pressure?
It works from around 1 bar, but the spray feels weak below 1.5 bar. If your pressure is low, a booster pump or a model with a different flow regulator may help.
Can I connect a water filter to this tap?
This version is a standard mixer. Choose the filter tap variant to get filtered water from the same tap, or add a separate small filter tap.
Does a black kitchen tap fade?
Good-quality PVD black finishes are very durable. Avoid acidic descalers and abrasive pads, which are the usual cause of patchy finishes.
Want your kitchen tap replaced this week? WhatsApp FIXORA Decor on +971501962136 or call +971 50 196 2136 and our plumbers in Dubai will confirm a visit, or see our maintenance services.
الأسئلة الشائعة
For a mid-range pull-down mixer, expect roughly AED 600 to AED 1,200 including fitting, as an indicative range. Premium finishes, filter taps and stone drilling add to the cost.
Usually the hose weight is in the wrong position, the hose is catching on something in the cabinet, or the docking magnet is weak. Our model uses a strong magnet, and we set the weight correctly when installing.
It works from around 1 bar, but the spray feels weak below 1.5 bar. If your pressure is low, a booster pump or a model with a different flow regulator may help.
This version is a standard mixer. Choose the filter tap variant to get filtered water from the same tap, or add a separate small filter tap.
Good-quality PVD black finishes are very durable. Avoid acidic descalers and abrasive pads, which are the usual cause of patchy finishes. Want your kitchen tap replaced this week? WhatsApp FIXORA Decor on +971501962136 or call +971 50 196 2136 and our plumbers in Dubai will confirm a visit, or see our maintenance services .
تقييمات العملاء
لا توجد تقييمات بعد. كن أول من يشارك تجربته.
اكتب تقييمًا
الأسئلة والأجوبة
لا توجد أسئلة بعد. كن أول من يسأل.
قد يعجبك أيضاً




