
المواصفات
- SKU
- FX-E-006
- الفئة
- التكييف والتبريد
- الوزن
- 42 kg
- Control
- Remote, Wi-Fi app
- Capacity
- 1 Ton
- Refrigerant
- R32
- Climate class
- T3
التوصيل والتركيب
- توصيل محلي سريع
- تركيب احترافي
- يشمل الضمان
اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر
نقبل الإرجاع خلال 7 يومًا من التسليم، ويتحمل العميل تكلفة شحن الإرجاع.
المستندات
افتح على هاتفك
امسح هذا الرمز بكاميرا هاتفك لفتح هذا المنتج.
مكيف سبليت إنفرتر 1 طن، تصنيف T3 للحرارة المرتفعة، مع واي فاي
الأسعار تشمل ضريبة القيمة المضافة بنسبة 5%. · SKU: FX-E-006
اختر الخيار الذي تفضّله واذكره في ملاحظات الطلب أو عبر WhatsApp — نؤكد التوفر قبل الإرسال.
اطلب الآن، التوصيل المتوقع الأربعاء، 18 نوفمبر – السبت، 21 نوفمبر
مكيف سبليت إنفرتر 1 طن (12,000 BTU/h) مصمم لظروف T3 شديدة الحرارة، مع تحكم بالواي فاي وملف مقاوم للتآكل، لغرف النوم والمكاتب وغرف الخدم في الإمارات.
أضف إلى قائمة
سجّل الدخول لاستخدام هذااسأل عن هذا المنتجاطلب عرض سعر لهذا المنتج
إجابة سريعة
مكيف سبليت إنفرتر 1 طن (12,000 BTU/h) مصمم لظروف T3 شديدة الحرارة، مع تحكم بالواي فاي وملف مقاوم للتآكل، لغرف النوم والمكاتب وغرف الخدم في الإمارات. The inverter compressor adjusts its speed to the room load instead of switching fully on and off.
حقائق رئيسية
- Bedrooms and study rooms of around 12–18 m² in villas and townhouses.
- Small, shaded bedroom (10–14 m²): 1 ton is usually sufficient.
- Bedroom of 15–18 m² with moderate glazing: 1 ton can work if the room is well insulated; a technician should check.
آخر تحديث:
الوصف
A 1 ton inverter split AC is the right size for most small bedrooms, study rooms, maid's rooms and single offices in the UAE, roughly 12 to 18 square metres depending on sun exposure and insulation. This model is rated for T3 high-ambient conditions, which means it is designed to keep cooling when outdoor temperatures go well above 45 °C, and it adds Wi-Fi control and an anti-corrosion coated outdoor coil for coastal areas. The inverter compressor adjusts its speed to the room load instead of switching fully on and off.
This page explains who the 1 ton inverter split AC is for, specifications, sizing and compatibility, why T3 matters in the UAE, installation and approvals, maintenance, alternatives, price guidance and warranty points.
1 ton inverter split AC: overview
Split AC units have two parts: a wall-mounted indoor unit with the evaporator and fan, and an outdoor unit with the compressor and condenser. They are connected by insulated copper refrigerant pipes, a condensate drain and power and control cables. In the UAE, splits are common in villas, older low-rise buildings, add-on rooms, roof extensions, labour and staff accommodation, small shops and offices, and anywhere central or district cooling is not available.
Key features of this unit:
- Inverter rotary compressor that runs at variable speed for steadier temperatures and generally lower consumption than fixed-speed units over a long season.
- T3 high-ambient design with a larger condenser coil and components selected for very hot outdoor air.
- Anti-corrosion coated outdoor coil suited to humid, salty coastal air in places such as Jumeirah, Palm Jumeirah, Al Mamzar and Saadiyat.
- Wi-Fi module built in, with app control, schedules and energy monitoring.
- Self-clean and anti-mould functions that dry the indoor coil after switching off.
- Sleep mode and quiet fan settings for bedrooms.
- R32 refrigerant, which has a lower global warming potential than older R410A units.
Who it is for
- Bedrooms and study rooms of around 12–18 m² in villas and townhouses.
- Maid's rooms and drivers' rooms, which are often small, sometimes on an external wall and frequently undercooled.
- Single offices, cabins and consultation rooms in small commercial premises.
- Roof rooms, gym rooms and garden studios added to villas, where extending central AC is impractical.
- Replacement of old fixed-speed units that are noisy, struggle in August or use refrigerants that are harder to service.
Specifications
| Item | Specification |
|---|---|
| Nominal cooling capacity | 1 ton, approx. 12,000 BTU/h (about 3.5 kW) at standard rating conditions |
| Climate class | T3 high-ambient design |
| Compressor | Inverter rotary, variable speed |
| Refrigerant | R32 |
| Power supply | 220–240 V, single phase, 50 Hz |
| Indoor noise | Low-noise sleep mode; exact figures on the rating plate |
| Outdoor coil | Anti-corrosion coated fins |
| Controls | Infrared remote, Wi-Fi app, schedules, sleep curve |
| Pipe sizes | Typically 1/4 in liquid and 3/8 in suction; confirm in the installation manual |
| Max pipe length | Within manufacturer limits; long runs may need additional refrigerant charge |
| Energy label | Carries the UAE energy efficiency star label; check the star rating on the specific model |
| Suggested room size | About 12–18 m², depending on sun, glazing and occupancy |
Sizing and compatibility
Sizing is the most common mistake with split units in the UAE. A rule of thumb is not enough when a room has a west-facing window, a top-floor ceiling under a hot roof or many occupants.
- Small, shaded bedroom (10–14 m²): 1 ton is usually sufficient.
- Bedroom of 15–18 m² with moderate glazing: 1 ton can work if the room is well insulated; a technician should check.
- Sunny rooms, top-floor rooms or rooms over 18 m²: consider 1.5 ton.
- Majlis and large living rooms: usually 2 ton or more, or several units.
Other compatibility points:
- Outdoor unit location. Needs free airflow, shade where possible and a safe spot for service access. Building and community rules often restrict outdoor units on facades and balconies, so check with the developer or community management.
- Electrical supply. A dedicated circuit with the correct breaker and isolator is required. Older villas may need a board upgrade if many AC units are being added.
- Drainage. The condensate must drain to a suitable point; a condensate pump may be needed if gravity drainage is not possible.
- Replacing an old unit. Existing R22 or R410A pipework may be reusable only after inspection and thorough cleaning; in many cases new pipes are recommended.
Why T3 matters in the UAE climate
Most AC capacity ratings are measured at 35 °C outdoor temperature. In Dubai, Abu Dhabi and Al Ain summer afternoons regularly exceed that, and rooftop or enclosed outdoor-unit locations can be much hotter than the weather forecast because of reflected heat and recirculating exhaust air. Units built for T3 conditions are designed and tested to keep running at high ambient temperatures where standard units may lose capacity sharply or trip on high pressure.
Practical tips for UAE conditions:
- Keep outdoor units out of tight enclosures where hot exhaust air recirculates.
- Shade the outdoor unit, but never block its airflow.
- Wash the outdoor coil before summer and after heavy dust events.
- Set bedrooms at 23–25 °C rather than 18 °C; the inverter works more efficiently at moderate set points.
- Use the anti-mould dry function in humid months to prevent musty smells.
Installation and approvals
A split AC installation involves refrigerant work, electrical connection and often drilling through external walls, so it must be done by qualified HVAC technicians from a licensed company. Electrical connections must follow the local utility's wiring rules (DEWA in Dubai, and the relevant authority in other emirates). Adding a new circuit or changing the distribution board may need a licensed electrical contractor and, depending on the scope, approval or inspection, so check current requirements before work starts. In villas and towers, the community or building management usually requires a work permit and may have rules on outdoor unit placement and facade drilling.
A standard installation by FIXORA Decor includes:
- Survey of room size, wall structure, outdoor unit location and electrical supply.
- Mounting the indoor unit level with a slight fall towards the drain.
- Core-drilling the wall sleeve and sealing it against water and dust.
- Fitting insulated copper pipes up to a standard length, with proper flaring and supports.
- Vacuuming the system, leak-testing and opening the refrigerant valves.
- Connecting to a dedicated circuit with isolator, then commissioning and checking temperatures.
- Setting up the Wi-Fi app and explaining sleep, schedule and self-clean modes.
Maintenance
- Clean the indoor filters every 2–4 weeks in summer; it takes minutes and has a big effect on airflow.
- Book a full service at least once or twice a year: coil cleaning, drain flushing, outdoor coil washing and electrical checks.
- Watch for water drips, ice on pipes or reduced cooling, which can signal a blocked drain or a refrigerant issue.
- Keep plants, storage and covers away from the outdoor unit.
- Update the Wi-Fi module firmware from the app.
1 ton inverter split vs alternatives
| Option | Best for | Pros | Limits | Indicative installed cost (AED) |
|---|---|---|---|---|
| 1 ton fixed-speed split | Low-use rooms, tight budgets | Lower purchase price | Higher running costs, louder cycling | 1,600–2,200 |
| This 1 ton inverter T3 split | Bedrooms, maid's rooms, small offices | Efficient, quiet, handles extreme heat, Wi-Fi | Higher upfront cost | 2,600–3,300 |
| Window AC | Older buildings with existing openings | Simple, single box | Noisy, less efficient, limited by building rules | 1,200–2,000 |
| Portable AC | Temporary cooling | No installation | Low efficiency, hose through window | 1,200–2,500 |
| Ducted extension | Rooms near existing ducted system | Hidden, central control | Only if capacity allows; ceiling works | Varies widely |
Price guidance
The supply price shown includes the indoor and outdoor units, remote and Wi-Fi module, with VAT applied at checkout. Indicative 2026 ranges in Dubai:
- Supply and standard installation with up to about 3 m of pipe: roughly AED 2,600–3,300.
- Extra pipe length: priced per metre, typically AED 80–150 including insulation.
- New dedicated circuit or condensate pump: added after survey.
- Removal and disposal of an old unit: roughly AED 100–250.
These are indicative ranges that depend on access, wall type, pipe route, electrical work and building rules, and are confirmed after a site survey.
Warranty notes
Split AC units usually have a manufacturer warranty on parts and a longer warranty on the compressor; the exact terms are on the warranty card and invoice. Many manufacturers require installation by a qualified installer and regular servicing for the warranty to remain valid, so keep service records. Damage from voltage fluctuations, incorrect installation by others, lack of maintenance or physical damage is generally excluded. FIXORA Decor covers its installation workmanship separately.
Key takeaways
- 1 ton suits rooms of about 12–18 m²; sunny or top-floor rooms may need 1.5 ton.
- T3 design is important for UAE summers above 45 °C.
- Installation needs qualified technicians, a dedicated circuit and building approval for outdoor units.
- Clean filters frequently in summer and service the unit at least once a year.
Frequently asked questions
Is a 1 ton AC enough for a bedroom in Dubai?
For most small bedrooms up to around 14 m², yes. Larger, sunny or top-floor rooms often need 1.5 ton; a survey confirms the right size.
What does T3 mean on an AC?
It refers to a climate class for hot conditions. T3-designed units are built to keep cooling at high outdoor temperatures typical of Gulf summers.
Do I need DEWA approval to install a split AC?
Replacing a unit on an existing suitable circuit usually does not need a separate application, but new circuits or board changes must follow DEWA rules and may need approval. Building permits often apply too.
How much does an inverter AC save?
Savings depend on use, sizing and set point. Inverter units typically use less electricity than fixed-speed units in rooms that run for many hours, but we do not promise a specific percentage.
Where can the outdoor unit go in an apartment?
Only where the building allows, usually in a designated AC ledge or plant area. Ask building management before ordering.
Need a quiet, efficient AC for a bedroom or office? FIXORA Decor supplies and installs inverter split units across Dubai, Abu Dhabi and Sharjah. WhatsApp +971501962136 or request a quotation.
الأسئلة الشائعة
For most small bedrooms up to around 14 m², yes. Larger, sunny or top-floor rooms often need 1.5 ton; a survey confirms the right size.
It refers to a climate class for hot conditions. T3-designed units are built to keep cooling at high outdoor temperatures typical of Gulf summers.
Replacing a unit on an existing suitable circuit usually does not need a separate application, but new circuits or board changes must follow DEWA rules and may need approval. Building permits often apply too.
Savings depend on use, sizing and set point. Inverter units typically use less electricity than fixed-speed units in rooms that run for many hours, but we do not promise a specific percentage.
Only where the building allows, usually in a designated AC ledge or plant area. Ask building management before ordering. Need a quiet, efficient AC for a bedroom or office? FIXORA Decor supplies and installs inverter split units across Dubai, Abu Dhabi and Sharjah. WhatsApp +971501962136 or request a quotation .
المصادر
تقييمات العملاء
لا توجد تقييمات بعد. كن أول من يشارك تجربته.
اكتب تقييمًا
الأسئلة والأجوبة
لا توجد أسئلة بعد. كن أول من يسأل.
قد يعجبك أيضاً




