
Transformation d'une chambre de service dans une villa à Mirdif
Transformation d'une chambre de service dans une villa à Mirdif : FIXORA Decor a transformé une pièce inutilisée en bureau à domicile en deux semaines, avec sol vinyle, bureau et étagères intégrés, électricité, réseau, éclairage LED, bouche de climatisation déplacée et toilettes rafraîchies.
Réponse rapide
Transformation d'une chambre de service dans une villa à Mirdif : FIXORA Decor a transformé une pièce inutilisée en bureau à domicile en deux semaines, avec sol vinyle, bureau et étagères intégrés, électricité, réseau, éclairage LED, bouche de climatisation déplacée et toilettes rafraîchies.
Points clés
- As a typical / indicative 2026 range, SPC vinyl flooring is around AED 60–130 per m² installed, depending on product and preparation and confirmed after a site survey.
Dernière mise à jour :
This maid's room conversion in a Mirdif villa turned a small, unused room off the kitchen into a practical home office in two weeks. FIXORA Decor fitted new vinyl flooring, plastered and painted the room, built a made-to-measure desk and shelving, added power, data and LED lighting, relocated the AC outlet and refreshed the adjoining shower room as a guest cloakroom.
This case study covers the brief, scope and challenges, then offers practical advice for villa owners in Mirdif and across Dubai who want to make better use of a maid's room, whether as a study, a guest room, a gym or extra storage.
Project at a glance
| Item | Detail |
|---|---|
| Location | Mirdif, Dubai |
| Area | 16 m² |
| Client | Private villa owner |
| Duration | 2 weeks |
| Completed | November 2024 |
| New use | Home office, with the adjoining shower room kept as a guest cloakroom |
The brief
A villa owner in Mirdif had a small maid's room off the kitchen that had gone unused for years and asked FIXORA Decor to convert it into a home office with good storage and a proper work setup. The room needed new flooring, lighting and data points, and the adjoining shower room was to be kept as a guest cloakroom.
This is a common situation in Mirdif and other established villa communities. Many villas were built with a maid's room and its own shower room near the kitchen or service entrance. When a household no longer needs live-in help, the room often becomes a storeroom. Converting it puts usable floor area back into daily life without the cost and approvals of an extension.
Scope of work
- Removal of existing fittings and worn flooring
- New vinyl flooring and fresh plaster and paint to walls and ceiling
- Built-in desk and shelving joinery sized to the room
- Additional power sockets, a data point and upgraded LED lighting
- Air conditioning outlet relocated for better airflow in the new layout
- Adjoining shower room cleaned, resealed and repainted
Challenges and how they were handled
Joinery with no margin for error
The room's small footprint meant the joinery had to be designed and measured precisely before manufacture, since there was no room for adjustment on site. In small rooms, every centimetre counts: the desk depth, the clearance for a chair, door swing and the position of sockets all have to work together.
AC downtime in a Dubai villa
Relocating the air conditioning outlet required a short period with the unit offline, which was scheduled outside the hottest part of the day.
Working through a family kitchen
Access for materials was through the kitchen, so deliveries were timed around the family's routine. When the only route into a room passes through a working kitchen, protection, cleanliness and timing matter as much as the work itself.
Designing a home office in a small room
A maid's room is usually compact, often with a single small window or none at all. That shapes the design:
- Built-in rather than freestanding. A fitted desk and shelving use the full width and height of the walls, and avoid the wasted gaps around freestanding furniture.
- Light first. With limited daylight, good artificial lighting is essential. A combination of general LED lighting and a task light at the desk reduces eye strain. Neutral to cool-white light suits focused work.
- Enough sockets in the right places. Plan power and data at desk height for computers, screens, chargers and a printer, so cables do not trail across the floor.
- A wired data point. Rooms at the back of a villa can have weak Wi-Fi. A wired connection is more reliable for video calls.
- Airflow. Small rooms with computers warm up quickly. The AC outlet position should push air across the room without blowing directly onto the person at the desk, which is why relocation is often worthwhile.
- Light colours. Pale walls and a lighter floor make a small room feel larger.
For more ideas, see our guides to home office design for Dubai villas and apartments and maid's room and laundry room upgrades.
Other uses for a maid's room
| New use | What to plan for |
|---|---|
| Home office | Fitted desk, sockets, data point, task lighting, airflow |
| Guest bedroom | Wardrobe, blackout window covering, refreshed shower room |
| Home gym | Impact-resistant flooring, mirrors, extra ventilation |
| Storage or pantry | Full-height shelving, good lighting, possibly a second fridge point |
| Prayer room | Calm finishes, soft flooring, orientation and quiet location |
Flooring and finishes for converted rooms
Many older Mirdif villas have tiled floors throughout, which can feel cold and echoey in a small study. Vinyl flooring, as used here, is warmer underfoot, quiet, water resistant and quick to install. Rigid SPC vinyl is often laid over existing tiles where they are level and sound; otherwise old flooring is removed first, as it was on this project. Compare the options in our guide to SPC, LVT and laminate in the UAE climate.
Walls in rooms that have been unused or closed for a long time often show cracks, damp marks or patchy paint, so fresh plaster repairs before painting give a far better finish than painting over defects. A washable emulsion suits a work room.
Refreshing the adjoining shower room
Keeping the shower room as a guest cloakroom was a cost-effective decision. Cleaning, resealing and repainting is far simpler than a full bathroom renovation, but still removes the tired look of old silicone and stained walls. If a shower room has been unused for a long time, it is worth running water through all outlets, checking traps and seals for drain odours, and confirming there are no slow leaks before relying on it again. Our guide to guest washroom ideas for Dubai villas has more ideas if you want to go further.
How a two-week room conversion is typically sequenced
- Survey and design. Measure the room, confirm power, data and AC positions, and design the joinery.
- Joinery manufacture starts. Units are made off-site while work begins in the room.
- Strip-out. Remove old fittings and flooring.
- Electrical and AC works. Add sockets, the data point and lighting circuits, and relocate the AC outlet.
- Plaster and paint. Repair walls and ceiling, then paint.
- Flooring. Lay the new vinyl floor.
- Joinery installation and second fix. Fit the desk and shelving, then sockets, switches and light fittings.
- Shower room refresh and clean. Clean, reseal and repaint, followed by a final clean and handover.
Approvals and permits
Converting a room inside a villa without structural changes, extensions or changes to the external appearance usually involves interior finishing work only. However, requirements differ by community and by the work involved, especially for electrical changes. Check with Dubai Municipality or your community management if you are unsure, and confirm that any electrical work is carried out to DEWA regulations. Our Mirdif villa renovation ideas article covers the area in more detail.
What affects the cost
- Joinery is usually the largest item. Material, finish, the number of drawers and doors, and integrated lighting all affect price.
- Electrical additions: the number of new sockets, data points and lighting circuits, and the distance from the distribution board.
- AC changes: relocating an outlet is typically simpler than adding a new unit.
- Floor preparation: removing old flooring and levelling adds time compared with laying directly over sound tiles.
- Wall condition: more plaster repairs mean more preparation time.
As a typical / indicative 2026 range, SPC vinyl flooring is around AED 60–130 per m² installed, depending on product and preparation and confirmed after a site survey. Joinery and electrical costs depend heavily on the design, so they are priced after a survey.
Planning checklist
- Decide on the room's new use before designing anything.
- List the equipment you will use so power and data are in the right places.
- Check the AC outlet position against the desk or bed layout.
- Have the joinery measured on site, not from old drawings.
- Plan access and deliveries around family routines.
- Decide what happens to the adjoining shower room.
Result
The former maid's room is now a functional home office with built-in storage, good lighting and a proper desk setup, completed in two weeks. The adjoining cloakroom was refreshed at the same time, so the whole corner of the villa now gets regular use instead of sitting empty.
Key takeaways
- An unused maid's room is one of the easiest ways to gain usable space in a villa.
- Precise measurement is essential for joinery in small rooms.
- Power, data, lighting and airflow make a home office comfortable to work in.
- Schedule AC downtime outside the hottest part of the day.
- A simple refresh can bring an adjoining shower room back into use.
Frequently asked questions
Can I convert a maid's room into a home office in Dubai?
Yes. Interior conversions without structural or external changes are usually straightforward, but check with your community management or Dubai Municipality if the work goes beyond finishing.
How long does a maid's room conversion take?
This conversion, including joinery, flooring, electrical work, AC relocation and a shower room refresh, was completed in two weeks.
What flooring is best for a converted maid's room?
Vinyl or SPC flooring is a popular choice because it is warm, quiet, water resistant and quick to install.
Is it worth relocating the AC outlet in a small room?
Often yes. When a room's layout changes, the original outlet may blow directly onto the desk or miss part of the room, so relocating it improves comfort.
Should I keep the maid's shower room?
Many owners keep it as a guest cloakroom. A clean, reseal and repaint is a low-cost way to make it usable again.
Turn your unused room into usable space
If you have a maid's room, storeroom or spare room that is not being used, FIXORA Decor can design and deliver a conversion around your needs. Call +971 50 196 2136, message us on WhatsApp at +971501962136, or request a quote. See our joinery and carpentry and flooring services for more.
Galerie
Questions fréquentes
Yes. Interior conversions without structural or external changes are usually straightforward, but check with your community management or Dubai Municipality if the work goes beyond finishing.
This conversion, including joinery, flooring, electrical work, AC relocation and a shower room refresh, was completed in two weeks.
Vinyl or SPC flooring is a popular choice because it is warm, quiet, water resistant and quick to install.
Often yes. When a room's layout changes, the original outlet may blow directly onto the desk or miss part of the room, so relocating it improves comfort.
Many owners keep it as a guest cloakroom. A clean, reseal and repaint is a low-cost way to make it usable again.
Sources
Lancez votre projet
Notre équipe est prête à vous aider — obtenez un devis gratuit dès aujourd’hui.
Ou appelez-nous+971 50 196 2136


