
Conception et aménagement d'un kiosque de parfums en centre commercial
Aménagement d'un kiosque de parfums en centre commercial à Deira, Dubaï : un kiosque îlot autoportant de 9 m² conçu selon le manuel des kiosques du centre, fabriqué hors site en panneaux modulaires sur trois semaines, puis installé, raccordé et validé en un seul créneau de nuit.
Réponse rapide
FIXORA Decor spent three weeks on design and off-site fabrication, then assembled, connected and handed over the kiosk overnight so it could trade from opening the next morning. Most of the value in a project like this sits in the joinery and carpentry workshop, where panels, counters and display shelving are built and finished before they ever reach the mall.
Points clés
- Item Detail Location Deira, Dubai Client Perfume retailer Sector Retail Area 9 m² Duration 3 weeks design and fabrication, 1 overnight installation Completed September 2023 The brief
Dernière mise à jour :
This mall perfume kiosk fit-out in Deira, Dubai delivered a 9 m² freestanding island kiosk for a perfume retailer, built to the mall's kiosk design manual and installed in a single overnight access window. FIXORA Decor spent three weeks on design and off-site fabrication, then assembled, connected and handed over the kiosk overnight so it could trade from opening the next morning.
Here is how the project worked, and what any retailer planning a mall kiosk or RMU in the UAE should know before committing to a design.
Project at a glance
| Item | Detail |
|---|---|
| Location | Deira, Dubai |
| Client | Perfume retailer |
| Sector | Retail |
| Area | 9 m² |
| Duration | 3 weeks design and fabrication, 1 overnight installation |
| Completed | September 2023 |
The brief
A perfume retailer needed a freestanding island kiosk for a Dubai mall, built to the mall's kiosk design manual and installed within a single overnight access window with no disruption to daytime trading.
Perfume and oud are among the most common kiosk categories in UAE malls, and the format brings its own demands: products must be displayed attractively under good light, testers must be easy to reach, stock must be locked away securely, and the whole unit must look premium from every side because shoppers approach an island kiosk from all directions.
Scope of work
- Design development against the mall's kiosk guidelines, including maximum height and sightline rules
- Off-site fabrication of modular wall and counter panels with integrated lighting and lockable storage
- On-site assembly, levelling and services connection within the approved overnight slot
- Electrical connection to the mall's metered supply and testing of display lighting circuits
- Final inspection walk-through with mall technical services
Most of the value in a project like this sits in the joinery and carpentry workshop, where panels, counters and display shelving are built and finished before they ever reach the mall.
The challenge: one overnight window
The mall allowed only one overnight access window for the full installation, so FIXORA Decor pre-fabricated and pre-wired as much of the kiosk off-site as possible, rehearsing the assembly sequence to confirm it could be completed, tested and cleared for inspection before the mall reopened.
That approach changes how the whole project is planned. Instead of building on site and solving problems as they appear, almost every decision is made in the workshop: panel sizes are set so they can travel through service corridors and lifts, connections are designed to fit together quickly, and wiring is completed and tested before the panels leave. The overnight slot then becomes an assembly exercise rather than a construction one.
Result
The kiosk was installed, connected and signed off within the single overnight window, trading from opening the next morning. The modular build also made it straightforward for the client to relocate the kiosk to a different mall position later without a full rebuild.
How mall kiosk fit-outs work in Dubai
Mall kiosks are small, but the process around them is surprisingly structured. Each mall publishes its own design guidelines and fit-out rules, and the landlord's fit-out or tenant coordination team reviews every stage. Our guides to retail shop fit-out in Dubai malls and mall fit-out rules explain the wider process.
Typical stages
- Receive the kiosk design manual: maximum dimensions, height limits, sightlines, materials, signage and lighting rules.
- Concept design: layout of display, testers, till point and storage within the permitted footprint.
- Landlord review: submit drawings, finishes and lighting details, and respond to comments.
- Technical details: electrical load, connection to the mall's metered supply and any fire-related requirements the mall sets.
- Off-site fabrication: build, finish and pre-wire panels; dry-assemble in the workshop where practical.
- Book the installation slot: overnight access, loading bay time, worker passes and any permits the mall requires.
- Install and connect: assemble, level, connect and test.
- Inspection and handover: walk-through with mall technical services before trading starts.
Design rules that shape a perfume kiosk
- Height and sightlines: malls limit kiosk height so neighbouring shopfronts stay visible down the mall.
- Open on all sides: an island kiosk has no back wall, so every face needs to be finished to the same standard.
- Lighting: perfume bottles depend on light to look their best; integrated LED lighting in shelves and counters is common.
- Security: lockable storage for stock and valuables, because the kiosk is unattended when the mall is closed.
- Durable surfaces: counters see constant handling, spilled testers and cleaning, so finishes should resist alcohol-based liquids and scratching.
Why modular, off-site construction suits kiosks
| Factor | Built on site | Modular, built off-site |
|---|---|---|
| Mall access needed | Several nights or a hoarded area | As little as one overnight slot |
| Dust and noise in the mall | Higher | Minimal, mostly assembly |
| Finish quality | Harder to control in a live mall | Workshop conditions, consistent finish |
| Testing | On site, under time pressure | Wiring pre-tested before delivery |
| Relocation later | Often means a rebuild | Panels can be dismantled and reassembled |
For a retailer, the ability to move a kiosk is valuable. Mall leases for kiosks can be shorter or more flexible than for shops, and a modular unit can follow the best-performing position or move to a different centre.
What an overnight mall installation night looks like
Overnight work in a Dubai mall follows the landlord’s rules, which usually cover when contractors may enter, which loading bay and service routes they use, how the floor around the work area is protected and when the area must be clean and clear. On projects like this we typically plan the night as a timed sequence:
- Arrival and checks: passes, permits and a briefing with mall security or technical services.
- Delivery: panels moved from the loading bay through service corridors to the kiosk position, with floor protection laid along the route.
- Assembly and levelling: the base is set out and levelled first, because every panel above depends on it.
- Connection and testing: the kiosk is connected to the supply and each lighting circuit is tested.
- Cleaning: the kiosk and surrounding floor are cleaned so nothing is left for shoppers to see.
- Inspection: a walk-through with mall technical services before the area is released.
A spare-time buffer at the end of the night is important. If anything takes longer than planned, it has to be absorbed before the mall opens.
Cost factors for a mall kiosk
Kiosks and RMUs are often priced as a complete unit. As a typical / indicative 2026 range that depends on scope and is confirmed after a site survey and design review, mall kiosks commonly fall around AED 60,000–250,000 excluding 5% VAT, depending on size and materials. This is a general range from our published guides, not the cost of this project. The main drivers are:
- Materials and finishes: solid surfaces, metal trims and premium veneers cost more than laminates.
- Lighting: the amount of integrated display lighting and its control.
- Storage and security: lockable drawers, cabinets and shutters.
- Mall requirements: specific materials, approvals or inspections the landlord asks for.
- Installation constraints: overnight working, limited access and the need to pre-assemble in the workshop.
- Graphics and signage: branded panels and illuminated logos within mall rules.
Our article on retail shop fit-out cost in malls vs street retail puts kiosk costs in context.
Lessons for retailers planning a kiosk
- Read the design manual first. It is much cheaper to design within the rules than to redesign after a landlord comment.
- Plan for the slot, not the build. If access is limited to one night, design every panel and connection for quick, tested assembly.
- Check routes into the mall. Panel sizes must fit service doors, corridors and lifts.
- Think about relocation. A modular build costs a little more thought up front and can save a full rebuild later.
- Make the brand visible from every angle. See our guide to retail store branding through interior design.
- Leave time for inspection. The final walk-through with mall technical services has to happen before opening, so the programme must allow for it within the same night.
Kiosk planning checklist
- Obtain the mall's kiosk design manual and fit-out rules.
- Confirm the footprint, height limit and electrical supply arrangements.
- Agree the display, tester, till and storage layout.
- Select durable, easy-clean finishes and integrated lighting.
- Submit drawings for landlord approval and close out comments.
- Fabricate and pre-wire off-site; rehearse assembly.
- Book the installation slot, passes and loading bay time.
- Install, test, inspect and hand over before the mall opens.
See related work: a speciality coffee kiosk in an Al Reem Island mall and an oud and perfume boutique in Dubai Hills.
Key takeaways
- A 9 m² perfume kiosk in Deira was designed and fabricated over three weeks.
- It was built to the mall's kiosk manual, including height and sightline rules.
- Modular panels with integrated lighting and lockable storage were pre-wired off-site.
- Installation, connection and sign-off happened in one overnight window, with trading the next morning.
- The modular build makes it straightforward to relocate the kiosk later without a full rebuild.
Frequently asked questions
How long does it take to build a mall kiosk in Dubai?
This 9 m² kiosk took three weeks of design and fabrication and one overnight installation. Landlord approval time comes on top and varies by mall.
Can a kiosk be installed overnight without disturbing mall trading?
Yes, if it is prefabricated and pre-wired off-site and the assembly sequence is rehearsed. This kiosk was installed, connected and signed off in a single overnight window.
Do malls have rules for kiosk design?
Yes. Most malls issue a kiosk design manual covering maximum height, sightlines, materials, signage and lighting, and they review drawings before approving installation.
Can a mall kiosk be moved to another location?
A modular kiosk can usually be dismantled and reassembled. In this project, the modular build made it straightforward to relocate the kiosk later without a full rebuild.
How much does a mall kiosk cost in the UAE?
As an indicative 2026 range, around AED 60,000–250,000 excluding VAT depending on size and materials. A firm price follows design and a review of the mall's requirements.
Planning a kiosk or RMU?
FIXORA Decor designs, fabricates and installs mall kiosks and small retail units across the UAE. Send us the mall's design manual on WhatsApp at +971501962136, call +971 50 196 2136, or request a quote to start the design.
Galerie
Questions fréquentes
This 9 m² kiosk took three weeks of design and fabrication and one overnight installation. Landlord approval time comes on top and varies by mall.
Yes, if it is prefabricated and pre-wired off-site and the assembly sequence is rehearsed. This kiosk was installed, connected and signed off in a single overnight window.
Yes. Most malls issue a kiosk design manual covering maximum height, sightlines, materials, signage and lighting, and they review drawings before approving installation.
A modular kiosk can usually be dismantled and reassembled. In this project, the modular build made it straightforward to relocate the kiosk later without a full rebuild.
As an indicative 2026 range, around AED 60,000–250,000 excluding VAT depending on size and materials. A firm price follows design and a review of the mall's requirements.
Lancez votre projet
Notre équipe est prête à vous aider — obtenez un devis gratuit dès aujourd’hui.
Ou appelez-nous+971 50 196 2136


