
القوز میں فرنیچر شوروم فٹ آؤٹ
القوز میں فرنیچر شوروم فٹ آؤٹ: 950 m² کا ویئر ہاؤس ایک فرنیچر امپورٹر کے لیے 11 ہفتوں میں تبدیل، نئے میزانین آفس، پالش شدہ کنکریٹ فرش، پرتوں والی ڈسپلے لائٹنگ، سامان وصولی کے محفوظ ایریا اور سول ڈیفنس کی تبدیلیِ استعمال کی منظوری کے ساتھ۔
فوری جواب
FIXORA Decor built a new mezzanine floor with a staircase and glazed office, resurfaced the floor to polished concrete, designed layered display lighting, set up a safe goods-receiving area at the loading bay, and secured Dubai Civil Defence fire approval for the change of use.
اہم حقائق
- This furniture showroom fit-out in Al Quoz converted a 950 m² warehouse unit into a public-facing showroom for a furniture importer in 11 weeks, completed in April 2024.
آخری اپ ڈیٹ:
This furniture showroom fit-out in Al Quoz converted a 950 m² warehouse unit into a public-facing showroom for a furniture importer in 11 weeks, completed in April 2024. FIXORA Decor built a new mezzanine floor with a staircase and glazed office, resurfaced the floor to polished concrete, designed layered display lighting, set up a safe goods-receiving area at the loading bay, and secured Dubai Civil Defence fire approval for the change of use. The fire approval shaped the layout, so it was tackled first.
Project at a glance
| Item | Detail |
|---|---|
| Location | Al Quoz, Dubai |
| Client | Furniture importer |
| Area | 950 m² |
| Programme | 11 weeks |
| Completed | April 2024 |
| Key approval | Dubai Civil Defence fire approval for warehouse-to-showroom change of use |
The brief
A furniture importer leased a warehouse unit in Al Quoz and asked FIXORA Decor to convert it into a showroom with a visible mezzanine office, a dedicated loading and unloading area, and lighting that would show the product range well.
Al Quoz has become a popular home for furniture, lighting and design showrooms because its warehouse units offer large open floors, high ceilings and direct truck access at rents usually below retail malls. The trade-off is that a warehouse is built for storage, not for customers. Turning one into a showroom means dealing with fire safety for the public, creating an environment that flatters the product, and keeping deliveries apart from shoppers.
Scope of work
- Structural review and construction of a new mezzanine floor with a staircase and glazed office partitioning
- Floor resurfacing to a polished concrete finish suited to a showroom floor plan
- Layered lighting design combining ambient, track and accent lighting for product zones
- Loading bay door servicing and delineation of a safe goods-receiving area
- Dubai Civil Defence fire approval for the warehouse-to-showroom change of use, including exit signage and extinguisher provision
Challenges and how they were handled
A change-of-use fire approval that reshaped the layout
Converting a warehouse shell into a public-facing showroom meant working through a change-of-use fire approval with Dubai Civil Defence, which set requirements for exit widths, travel distances and signage that reshaped parts of the layout. FIXORA Decor coordinated the design revisions early so the approval did not hold up the fit-out programme.
This is the single most important lesson for anyone converting a warehouse. A showroom invites members of the public who do not know the building, so the fire strategy has to give them clear, short, wide routes to safety. Display layouts that look good on paper can block an exit route or lengthen a travel distance beyond what is allowed. Bringing the fire requirements into the design at the start costs far less than redesigning after a submission is returned. Our guides to Dubai Civil Defence approval for fit-outs and Civil Defence approval step by step explain the process in general terms.
Building a mezzanine in a warehouse unit
A mezzanine adds usable floor area without extending the building, and a visible mezzanine office lets the team overlook the showroom. On projects like this the work typically follows a set order:
- Structural review. Check the existing slab and structure can carry the new mezzanine's columns and loads, and decide on the structural system.
- Design and permits. Prepare drawings and obtain the approvals the relevant authority and landlord require for structural additions; check current requirements before committing to dates.
- Fire coordination. Confirm the mezzanine's escape route, staircase design and any fire protection the strategy requires.
- Construction. Erect the structure, deck, staircase and balustrades.
- Office fit-out. Glazed partitioning, lighting, power and air-conditioning for the office space on the mezzanine.
Air-conditioning deserves early thought. Warm air rises, and in Dubai's summer the space just below a warehouse roof can be the hottest part of the building. An office on a mezzanine needs cooling and, ideally, insulation planned for that.
Showroom lighting and flooring
Layered lighting
Furniture sells on texture, colour and proportion, so lighting has to do more than just make the space bright. A layered scheme typically combines:
- Ambient lighting for even general light across the floor.
- Track lighting that can be re-aimed as displays change, which matters for an importer whose range rotates.
- Accent lighting to pick out hero pieces and room sets.
Good colour rendering helps fabrics, timber and leather look true to life. Our articles on showroom design and lighting that sells and the LED lighting guide to Kelvin, lumens and CRI go deeper.
Polished concrete floors
Polished concrete suits a warehouse showroom well. It uses the existing slab, handles heavy furniture and pallet trucks, is easy to clean of the fine dust common in Al Quoz, and gives a neutral background that does not compete with the products. Owners should expect existing cracks and joints to show through to some extent; that industrial character is part of the look.
Separating deliveries from customers
An importer's showroom receives goods regularly. Loading bay door servicing and a clearly delineated goods-receiving area kept day-to-day deliveries separate from customer traffic. In general, a safe receiving area includes marked floor zones, a defined route from the bay to storage that does not cross the customer floor, and doors that open and close reliably so dust and heat stay outside.
Planning the showroom layout
With the fire routes fixed, the display layout can be planned around them. General principles that work well in large furniture showrooms include:
- A clear circulation loop. A main route that leads visitors past every product zone and back to the entrance, wide enough for couples and families to walk side by side, and doubling as part of the escape strategy where it can.
- Room sets. Grouping furniture into living, dining and bedroom settings helps customers picture pieces at home and gives accent lighting a natural focus.
- Sight lines to the mezzanine. A visible office and staircase signal that there is more to see upstairs and that staff are on hand.
- Space to change displays. Importers rotate stock, so flexible zones with adjustable track lighting avoid rewiring every time a container arrives.
- A service point. A counter or consultation area near the entrance for quotes, fabric samples and delivery bookings.
3D visualisation is particularly useful here, because it lets the owner test display layouts against the approved exit routes before anything is built.
Indicative cost guidance
We do not publish what individual clients paid. As a typical, indicative 2026 range that depends on scope and is confirmed only after a site survey, a standard showroom fit-out with modular displays in the UAE commonly costs around AED 1,200 to AED 2,500 per m², excluding products, furniture, fees and 5% VAT. Warehouse conversions add items that a mall unit does not need.
| Cost factor | Why it matters in a warehouse-to-showroom conversion |
|---|---|
| Mezzanine structure | Structural design, steelwork, staircase and balustrades |
| Fire and life safety | Change-of-use requirements: exits, signage, extinguishers and related works |
| Air-conditioning | Large, high volumes are expensive to cool; mezzanine offices need their own provision |
| Floor finish | Polished concrete reuses the slab; other finishes cost more over large areas |
| Lighting | Track and accent systems for product zones |
Result
The showroom opened with a layout that showcased the full furniture range across ground and mezzanine levels, a compliant fire and life-safety set-up, and an efficient goods-receiving area that kept day-to-day deliveries separate from customer traffic.
Checklist for converting a warehouse into a showroom
- Check with the landlord and the relevant authority that a showroom use is permitted for the unit.
- Bring fire safety requirements into the design from day one: exits, travel distances, signage.
- Commission a structural review before designing a mezzanine.
- Plan cooling for a high-volume space and any mezzanine office.
- Design lighting that can adapt as the product range changes.
- Separate goods receiving from customer routes.
- Allow for loading bay doors to be serviced so they seal against dust and heat.
Key takeaways
- A change of use from warehouse to showroom brings Civil Defence requirements that can reshape the layout.
- Coordinating fire requirements early protects the programme.
- A mezzanine adds space and a visible office, but needs structural review, safe access and cooling.
- Layered, adjustable lighting and a neutral polished concrete floor suit a rotating furniture range.
Related projects: our lighting showroom relaunch on Sheikh Zayed Road and an Al Quoz warehouse-to-office conversion. For office conversions see converting a warehouse into offices in Al Quoz.
Frequently asked questions
Do I need Civil Defence approval to turn a warehouse into a showroom?
Yes. On this project the change of use needed Dubai Civil Defence fire approval, which set requirements for exit widths, travel distances and signage. Check current requirements early in design.
Can I build a mezzanine in a warehouse in Al Quoz?
Often, subject to a structural review and the approvals the landlord and relevant authority require. The mezzanine also needs a safe staircase and must fit the fire strategy.
Is polished concrete good for a furniture showroom?
It is a popular choice: durable under heavy furniture, easy to clean and neutral as a backdrop. It reuses the existing slab, though some cracks and joints remain visible.
How long does a warehouse-to-showroom conversion take?
This 950 m² conversion took 11 weeks. Fire approval, structural work and lighting lead times usually influence the programme most.
What lighting works best for a furniture showroom?
A layered scheme with ambient, track and accent lighting, using fittings with good colour rendering so fabrics and finishes look accurate.
Planning a showroom in Al Quoz?
FIXORA Decor handles design, approvals coordination and construction as one turnkey fit-out, with interior design and 3D visualisation to test display layouts before work starts. WhatsApp +971501962136, call +971 50 196 2136, or request a quote.
گیلری
اکثر پوچھے جانے والے سوالات
Yes. On this project the change of use needed Dubai Civil Defence fire approval, which set requirements for exit widths, travel distances and signage. Check current requirements early in design.
Often, subject to a structural review and the approvals the landlord and relevant authority require. The mezzanine also needs a safe staircase and must fit the fire strategy.
It is a popular choice: durable under heavy furniture, easy to clean and neutral as a backdrop. It reuses the existing slab, though some cracks and joints remain visible.
This 950 m² conversion took 11 weeks. Fire approval, structural work and lighting lead times usually influence the programme most.
A layered scheme with ambient, track and accent lighting, using fittings with good colour rendering so fabrics and finishes look accurate.
ذرائع
اپنا پروجیکٹ شروع کریں
ہماری ٹیم مدد کے لیے تیار ہے — آج ہی مفت کوٹیشن حاصل کریں۔
یا ہمیں کال کریں+971 50 196 2136


