
جمیرہ میں ہیئر اینڈ بیوٹی سیلون فٹ آؤٹ
جمیرہ، دبئی میں سیلون فٹ آؤٹ: 150 m² خواتین کا ہیئر اینڈ بیوٹی سیلون 6 ہفتوں میں مکمل، مسلسل استعمال کے لیے بڑی کی گئی واش بے پلمبنگ، آواز سے محفوظ نجی ٹریٹمنٹ رومز، کیمیکل مزاحم فنشز اور اسٹائلنگ ٹولز کے لیے مخصوص سرکٹس کے ساتھ۔
فوری جواب
FIXORA Decor resized the wash bay drainage and hot water, partitioned sound-dampened treatment and waxing rooms, installed washable chemical-resistant finishes and put styling equipment on dedicated electrical circuits, so the salon could run at full capacity from opening day. Styling stations, mirror walls and reception counters are where the salon's brand is most visible.
اہم حقائق
- This salon fit-out in Jumeirah created a 150 m² ladies' hair and beauty salon in six weeks, combining an open styling floor with private treatment rooms.
آخری اپ ڈیٹ:
This salon fit-out in Jumeirah created a 150 m² ladies' hair and beauty salon in six weeks, combining an open styling floor with private treatment rooms. FIXORA Decor resized the wash bay drainage and hot water, partitioned sound-dampened treatment and waxing rooms, installed washable chemical-resistant finishes and put styling equipment on dedicated electrical circuits, so the salon could run at full capacity from opening day.
This case study explains what the operator needed, how the plumbing and electrical challenges were solved, and what anyone planning a salon or beauty fit-out in Dubai should check before committing to a unit and a layout.
Project at a glance
| Item | Detail |
|---|---|
| Location | Jumeirah, Dubai |
| Client | Salon owner |
| Area | 150 m² |
| Duration | 6 weeks |
| Completed | May 2025 |
| Key works | Wash bay plumbing and water heater, treatment room partitions, wet-area finishes, styling joinery and mirror walls, task lighting, dedicated electrical circuits |
The brief
A salon operator leasing a unit in Jumeirah needed a fit-out combining an open styling floor with private treatment rooms, finished to withstand frequent water exposure and daily disinfectant cleaning. Salons are deceptively demanding: they combine the plumbing loads of a small wet facility, the electrical loads of many high-wattage tools running at once, and the finish quality customers expect from a beauty brand.
Scope of work
- Plumbing upgrade for a row of wash basins, including a new water heater and drainage sized for salon use
- Partitioning for private treatment and waxing rooms with sound-dampening insulation
- Washable, chemical-resistant wall and floor finishes suited to a wet salon environment
- Styling station joinery, mirror walls and task lighting at each chair
- Electrical upgrade for hair dryers, styling tools and treatment room equipment on dedicated circuits
Styling stations, mirror walls and reception counters are where the salon's brand is most visible. Our joinery and carpentry team typically builds these from moisture-resistant boards with hard-wearing laminate or lacquer finishes, because cabinets near wash basins and steamers are exposed to water and hair products every day.
Challenges and how they were solved
Drainage not sized for a row of wash basins
The existing drainage in the unit was not sized for a continuous row of wash basins, so FIXORA Decor re-routed the waste line to a larger-diameter run and confirmed capacity with the building's plumbing riser before committing to the final basin layout. Wash basins in a salon run almost continuously at peak times and carry hair, product and conditioner into the pipework, so a drain that is fine for a pantry sink will block and smell under salon use.
Confirming riser capacity first was the key step. On salon projects we typically treat the basin position as fixed only once the connection point and fall to the riser are proven, because moving a wash bay later means breaking up a finished floor.
Electrical loads from multiple dryers
Salon electrical loads from multiple simultaneous dryers also required a dedicated circuit review to avoid nuisance trips. Hair dryers, straighteners, steamers and wax heaters all draw significant power, and on a busy day several stations run at once. Grouping them on shared circuits sized for a shop leads to breakers tripping mid-appointment, which is exactly what the circuit review was designed to prevent.
The result
The salon opened with a wash bay that handled peak Saturday demand without drainage issues and treatment rooms that gave clients a private, comfortable space. The operator has since asked FIXORA Decor to quote a second branch using the same layout.
What a salon fit-out in Dubai typically involves
Owners planning similar work should expect these broad stages. Our guide to salon and barbershop fit-out in Dubai explains each in more depth.
- Unit selection. Check that drainage, water supply, power capacity and extraction routes can support wash basins, a water heater and treatment rooms. A unit without a nearby drainage riser can become expensive.
- Layout. Position the wash bay close to drainage, keep treatment rooms away from the entrance and noisy zones, and plan a logical flow from reception to styling, washing and treatments.
- Engineering. Size drainage, hot water and electrical circuits for peak use, and plan ventilation for chemical treatments such as colouring and keratin services.
- Approvals. Landlord or building management approval, followed by the authority approvals that apply to the unit. Requirements for beauty and personal care premises can change, so check the current rules with Dubai Municipality and the relevant licensing authority before finalising drawings.
- Construction. Plumbing and electrical first fix, partitions with insulation, waterproofing in wet zones, ceilings, finishes, then joinery and mirrors.
- Commissioning. Run all basins together to test drainage, load-test circuits with tools in use, check water temperature stability and complete snagging.
Choosing finishes for a wet salon environment
Salon finishes must survive water, dye, bleach, hair product and disinfectant every single day. The table below summarises common choices.
| Area | Common finish | What to watch |
|---|---|---|
| Styling floor | Porcelain tiles or a resilient sheet floor | Hair dye staining, grout lines that trap hair, slip resistance when wet |
| Wash bay walls | Tiles or washable, chemical-resistant panels over waterproofing | Splash zones and silicone joints at basins |
| Treatment rooms | Scrubbable paint, vinyl or tiled walls | Wax and oil residues, disinfectant resistance |
| Joinery | Moisture-resistant boards with durable laminate or lacquer | Edge sealing near water and steamers |
| Ceilings | Moisture-resistant boards in wet zones | Humidity above wash basins |
Under the tiles, proper waterproofing matters as much as the visible finish. Our explainer on waterproofing materials covers the membranes typically used in wet areas, and the same principles apply to a salon wash bay.
Lighting that flatters clients and helps stylists
Task lighting at each chair was part of this project's scope, and it is one of the most important details in any salon. Stylists need even, shadow-free light on the face and hair, with good colour rendering so that colour work looks the same in the chair as it does outdoors. Warm, softer lighting suits treatment rooms. Our LED lighting guide on Kelvin, lumens and CRI explains how to specify each zone.
Ventilation, hot water and hygiene in Dubai's climate
Salons in Dubai face a combination of outdoor heat, indoor humidity from wash basins and steamers, and fumes from colour, bleach and smoothing treatments. A few principles help:
- Extraction near chemical services. Colour mixing areas and stations used for smoothing treatments benefit from local extraction so fumes do not build up in a closed, air-conditioned unit.
- Conditioned fresh air. Fresh air brought in from outside should be cooled and dehumidified, otherwise mirrors fog and wall finishes near the wash bay suffer from condensation.
- Hot water recovery. A row of basins in continuous use needs a water heater with enough capacity and recovery time that the last client on a busy Saturday gets the same temperature as the first. Our guide to water heater maintenance and replacement explains sizing and upkeep.
- Cleanable details. Fewer exposed joints, sealed edges on joinery and coved or sealed junctions at floor level make daily disinfection quicker and more effective.
- Access for maintenance. Provide access panels to traps and waste runs under the wash bay so routine drain cleaning does not mean removing finishes.
Cost factors for a salon fit-out
Every budget depends on the unit and is confirmed after a site survey. The main factors are:
- Distance from the wash bay to the drainage riser and any re-routing required
- Number of wash basins and the water heater capacity needed
- Number of treatment rooms and the level of sound insulation
- Electrical upgrade, including the number of dedicated circuits
- Joinery specification for styling stations, reception and retail display
- Finish level for floors, walls and mirror walls
- Ventilation for chemical services
VAT at 5% applies to fit-out invoices in the UAE, so include it when comparing quotations.
Planning checklist for salon owners in Dubai
- Locate the drainage riser before signing the lease and agree where the wash bay can go
- Ask the landlord about available electrical capacity and whether it can be increased
- Decide on the number of chairs, basins and treatment rooms before design starts
- Specify finishes for daily disinfection, not just appearance
- Plan acoustic insulation for treatment and waxing rooms early, before partitions close
- Allow time for building and authority approvals in the opening date
- Test basins and circuits together at full load before handover
- Keep the as-built drawings; they make a second branch far easier to plan
For a comparable project in a tower setting, see our JLT hair and beauty salon fit-out with treatment rooms, and for end-to-end delivery from design to handover see our turnkey fit-out service.
Key takeaways
- Salon drainage must be sized for continuous basin use and confirmed against the building riser before the layout is fixed.
- Dedicated circuits for dryers and styling tools prevent nuisance trips during busy periods.
- Finishes need to resist water, dye and daily disinfectant cleaning.
- Sound-dampened treatment rooms give clients privacy and comfort.
- A well-documented layout can be reused for future branches.
Frequently asked questions
How long does a salon fit-out take in Dubai?
This 150 m² salon in Jumeirah took six weeks. Timelines vary with the size of the unit, the amount of plumbing and electrical work, and how long approvals take.
Why do salons need bigger drainage than other shops?
Wash basins run continuously at busy times and carry hair and products into the pipes. Standard shop drainage is often too small, which leads to blockages and smells.
Do hair dryers need dedicated electrical circuits?
In a salon with several dryers and styling tools running at once, dedicated circuits are strongly recommended. They prevent breakers tripping in the middle of appointments.
What flooring is best for a hair salon?
Slip-resistant porcelain tiles or resilient sheet flooring are common choices. Look for surfaces that resist dye staining and are easy to sweep and disinfect.
Can a salon layout be reused for a second branch?
Yes, if the new unit has similar drainage and power positions. In this project the operator asked FIXORA Decor to quote a second branch using the same layout.
Planning a salon or beauty fit-out?
FIXORA Decor can check a unit's drainage, power and layout options before you sign, then deliver the complete fit-out. Message us on WhatsApp at +971501962136, call +971 50 196 2136, or request a quote to arrange a site survey.
گیلری
اکثر پوچھے جانے والے سوالات
This 150 m² salon in Jumeirah took six weeks. Timelines vary with the size of the unit, the amount of plumbing and electrical work, and how long approvals take.
Wash basins run continuously at busy times and carry hair and products into the pipes. Standard shop drainage is often too small, which leads to blockages and smells.
In a salon with several dryers and styling tools running at once, dedicated circuits are strongly recommended. They prevent breakers tripping in the middle of appointments.
Slip-resistant porcelain tiles or resilient sheet flooring are common choices. Look for surfaces that resist dye staining and are easy to sweep and disinfect.
Yes, if the new unit has similar drainage and power positions. In this project the operator asked FIXORA Decor to quote a second branch using the same layout.
ذرائع
اپنا پروجیکٹ شروع کریں
ہماری ٹیم مدد کے لیے تیار ہے — آج ہی مفت کوٹیشن حاصل کریں۔
یا ہمیں کال کریں+971 50 196 2136


