سمر آفر: اے سی ڈیپ کلیننگ پر 20% رعایت — 30 جون سے پہلے بُک کریںابھی بُک کریں
مواد پر جائیں

تفصیلات

SKU
FX-D-001
زمرہ
فلورنگ
اکائی
m²
وزن
14.5 kg
Design
Calacatta, Statuario, Travertine, Concrete
Finish
Polished, Satin, Matt
Thickness
6 mm, 12 mm

ڈیلیوری اور تنصیب

  • تیز مقامی ڈیلیوری
  • پیشہ ورانہ تنصیب
  • وارنٹی شامل ہے

ابھی آرڈر کریں، متوقع ڈیلیوری بدھ، 18 نومبر – ہفتہ، 21 نومبر

ڈیلیوری کے 7 دن کے اندر واپسی قبول کی جاتی ہے؛ واپسی کی ترسیل کا خرچ گاہک ادا کرتا ہے۔

تنصیب بُک کریں

دستاویزات

فلورنگ13% بچائیںاسٹاک میں: 120

لارج فارمیٹ پورسلین سلیب، 120 x 240 cm، 6 mm، ماربل لک، فی m²

AED 309.75AED 357.00

قیمتوں میں 5% ویٹ شامل ہے۔ · SKU: FX-D-001

Design
Finish
Thickness

اپنا پسندیدہ آپشن منتخب کریں اور آرڈر نوٹس میں یا WhatsApp پر اس کا ذکر کریں — ہم روانگی سے پہلے دستیابی کی تصدیق کرتے ہیں۔

ابھی آرڈر کریں، متوقع ڈیلیوری بدھ، 18 نومبر – ہفتہ، 21 نومبر

حقیقی ماربل اور پتھر کے ڈیزائن کے ساتھ تقریباً بغیر جوڑ 120 x 240 cm پورسلین سلیب، یو اے ای کے گھروں اور فٹ آؤٹ میں فرش اور فیچر والز کے لیے۔

اس پروڈکٹ کے بارے میں پوچھیںاس پروڈکٹ کا کوٹیشن طلب کریں

فوری جواب

A large-format porcelain slab at 120 x 240 cm gives a Dubai floor or feature wall the look of continuous stone with a fraction of the joints, the stain resistance of fully vitrified porcelain and none of the sealing that natural marble needs.

اہم حقائق

  • Indicative 2026 supply price is from AED 295 per m², excluding installation and 5% VAT.
  • Water absorption Very low, in line with porcelain classification (under 0.5%)
  • Weight Roughly 14–15 kg per m² at 6 mm

آخری اپ ڈیٹ:

تفصیل

A large-format porcelain slab at 120 x 240 cm gives a Dubai floor or feature wall the look of continuous stone with a fraction of the joints, the stain resistance of fully vitrified porcelain and none of the sealing that natural marble needs. This 6 mm slab is sold per square metre and is supplied by FIXORA Decor with the levelling clips, adhesive specification and specialist installation crew that large-format porcelain demands. Indicative 2026 supply price is from AED 295 per m², excluding installation and 5% VAT.

Large-format porcelain slabs have moved from luxury hotel lobbies into villas in Dubai Hills, Arabian Ranches and Palm Jumeirah, and into high-end apartments in Downtown and Dubai Marina. Homeowners searching for "large porcelain tiles Dubai" or "marble-look porcelain price UAE" usually want two things: a seamless, calm floor that reads as one surface, and a material that copes with heat, sand and heavy daily cleaning. This page explains what the slab is, who it suits, how it is installed, what it costs and how it compares with marble, smaller tiles and other premium floors.

Large-format porcelain slab overview

Porcelain is clay and feldspar pressed under very high pressure and fired at around 1,200 °C, producing a dense body with very low water absorption. Large-format slabs are pressed in big sheets and then rectified, meaning the edges are machine-ground square so that joints can be as thin as 2 mm. The surface carries a high-definition printed design, which is how a slab can reproduce Calacatta, Statuario, travertine, concrete or onyx veining with realistic depth.

The 6 mm thickness keeps the slab light enough to be handled by a two-person crew with a lifting frame and suction cups, and thin enough to be laid over existing tiles in many renovations without raising floor levels dramatically. Where heavier loads or outdoor use are expected, a thicker 12 mm version is available on request.

Who this slab is for

  • Villa owners renovating living areas, majlis rooms and entrance halls who want a marble look without marble maintenance.
  • Apartment owners in towers where floor-height changes must be minimal, since thin slabs can often go over sound existing tiles.
  • Kitchen and bathroom projects needing book-matched feature walls, shower walls with almost no grout lines, or matching splashbacks.
  • Commercial fit-outs such as boutiques, clinics, showrooms and reception areas where a premium first impression and easy cleaning matter.

It is less suited to rooms with very uneven or flexible subfloors, small awkward rooms with many cuts, and projects on a tight budget where standard 60 x 60 cm porcelain would do the job.

Specifications

PropertyDetail
Format120 x 240 cm, rectified edges
Thickness6 mm (12 mm available to order)
BodyFully vitrified porcelain, glazed and digitally printed surface
Water absorptionVery low, in line with porcelain classification (under 0.5%)
FinishesPolished, satin (honed look) and matt
WeightRoughly 14–15 kg per m² at 6 mm
UsesInterior floors, walls, shower walls, splashbacks, furniture cladding
Recommended joint2–3 mm, colour-matched grout
Sold bySquare metre (one slab = 2.88 m²)

Sizes, finishes and design variants

The standard stock format is 120 x 240 cm, because it suits typical Dubai room proportions and fits through most apartment service lifts when moved on an A-frame. Larger formats, such as 160 x 320 cm, exist in the market but need special access and handling, so they are quoted project by project.

  • Calacatta and Statuario white marble looks in polished or satin, popular for living areas and feature walls.
  • Warm travertine and limestone looks in matt, which hide dust and footprints better than polished whites.
  • Concrete and resin looks for modern apartments and commercial spaces.
  • Dark stones such as Nero Marquina and emperador looks, mostly used on walls and in powder rooms.
  • Book-matched pairs, where two slabs mirror each other's veining for a dramatic wall behind a TV unit or bathtub.

Polished finishes reflect light and make rooms look bigger, but they show scratches from grit and are slippery when wet, so we recommend satin or matt for main walkways, kitchens and anything near a pool or bathroom.

UAE climate suitability

Porcelain is one of the most stable materials for UAE interiors. It does not absorb moisture from humid coastal air in Dubai Marina, JBR or Abu Dhabi, so it will not swell like wood or laminate. It is unaffected by the strong sunlight that streams through floor-to-ceiling glazing, so the colour will not fade or yellow. Fine desert dust that enters during sandstorms sits on the surface and is removed with a damp mop rather than grinding into soft stone.

The real climate risk is thermal movement. Floors next to large west-facing windows can heat up during summer afternoons and then cool overnight as the AC runs. Large slabs need correctly placed movement joints at the perimeter and across large areas, plus full adhesive coverage, so that this expansion and contraction does not cause hollow spots or cracks. A good installer plans this before the first slab is laid.

Installation process

Large-format slabs are unforgiving of poor preparation, which is why we install them with crews trained specifically on big formats rather than general tilers.

  1. Site survey: we check access (lifts, stairwells, corridor turns), measure the room and test the floor flatness with a straight edge.
  2. Layout plan: slab positions, veining direction, cut locations and movement joints are drawn so the pattern flows and cuts land in discreet places.
  3. Substrate preparation: high spots are ground and low areas filled with a self-levelling compound. Existing tiles are checked for hollowness before over-tiling is approved.
  4. Adhesive: a deformable, high-performance cement adhesive suitable for large-format porcelain is applied to both the floor and the back of the slab (back-buttering) to achieve close to full coverage.
  5. Laying and levelling: slabs are placed with a lifting frame and suction cups, then a levelling clip system holds adjacent edges flush while the adhesive cures.
  6. Grouting and silicone: after curing, joints are grouted in a matching colour and perimeter and movement joints are finished with flexible sealant.

A typical 40 m² living and dining area takes around four to six working days including preparation, depending on the condition of the floor. Many Dubai communities and towers require a no-objection or work permit from the building management or master developer before tiling work starts; we prepare the method statement and documents, and the owner submits or authorises them as the building requires.

Maintenance and care

  • Dry-mop or vacuum daily to remove sand, which is the main cause of fine scratches on polished surfaces.
  • Wash with warm water and a pH-neutral floor cleaner; avoid acidic descalers or bleach on grout.
  • Use felt pads under furniture legs and lift, rather than drag, heavy sofas and dining tables.
  • Put an entrance mat at external doors and garden or pool access points.
  • Re-seal the cement grout lines periodically if they are in kitchens or entrance areas; the porcelain itself needs no sealing.

Large-format porcelain vs marble, standard tiles and SPC

FactorPorcelain slab 120 x 240Natural marblePorcelain tile 60 x 60SPC vinyl
LookNear-seamless stoneAuthentic, unique veiningVisible grid of jointsWood or stone print
Stain resistanceExcellentEtches with lemon, vinegar, cleanersExcellentGood
SealingNot neededRegularNot neededNot needed
Installation skillSpecialistSpecialist plus polishingStandardEasy
Feel underfootCool, hardCool, hardCool, hardWarmer, softer
Indicative supply costMid to highHigh to very highLowLow to mid

Choose marble if authenticity and patina matter more than practicality. Choose standard tiles if budget is the priority. Choose SPC if you are a tenant or want a fast, quiet, warm floor. Choose a large porcelain slab if you want the marble look with the lowest maintenance and the fewest grout lines.

Price guidance and what affects it

The listed price of AED 295 per m² is an indicative 2026 supply price for standard designs in 6 mm. Book-matched, premium-print and 12 mm slabs cost more. Installation is quoted separately because it depends heavily on site conditions.

ItemIndicative 2026 range (AED, excl. VAT)
Slab supply, 6 mm standard designs295 – 400 per m²
Slab supply, book-matched or 12 mm400 – 650 per m²
Specialist floor installation incl. adhesive and clips120 – 220 per m²
Wall installation (feature walls, showers)160 – 280 per m²
Floor levelling where needed35 – 90 per m²
Removing old tiles and screed repair30 – 80 per m²

What moves the price:

  • Waste factor: allow 8–12% extra, more in rooms with many angles or columns.
  • Access: high floors with small lifts, or villas with narrow stairs, may need extra labour or cutting on site.
  • Edge work: mitred edges on steps, niches and countertops take time.
  • Night or weekend working, which some Downtown and Business Bay towers impose.
  • VAT at 5% is added to the final invoice.

Warranty notes

Porcelain slabs carry the manufacturer's warranty against manufacturing defects such as delamination of the glaze or dimensional faults, which applies to slabs that have not been cut or installed when a defect is visible. Installation workmanship is covered separately by FIXORA Decor under the terms in your quotation. Warranties do not cover damage from impacts, dropped heavy objects, structural movement of the building, or use of aggressive chemicals. Always inspect slabs for shade and defects before installation; once a slab is fixed, it is deemed accepted.

Key takeaways

  • A 120 x 240 cm porcelain slab gives a near-seamless marble or stone look with no sealing.
  • It suits UAE heat, humidity, sun and dust better than marble, wood or laminate.
  • Success depends on a flat substrate, full adhesive coverage and movement joints.
  • Budget roughly AED 415–620 per m² supplied and installed for standard designs, before VAT.

Frequently asked questions

Can large porcelain slabs be laid over existing tiles?

Often yes, if the existing tiles are firmly bonded, flat and free of hollow spots. We tap-test and check flatness first. Over-tiling raises the floor by around 10–12 mm, so door bottoms and transitions to other rooms need planning.

Is polished porcelain slippery?

Polished finishes can be slippery when wet. For kitchens, bathrooms and areas near terraces or pools, we recommend satin or matt finishes, which still look premium but offer more grip.

Will a slab fit in my apartment lift?

Most residential service lifts in Dubai accept a 240 cm slab carried upright on an A-frame, but not all. We check the lift car height and diagonal during the site survey; if it will not fit, we can supply a smaller format or plan stair access.

How long until I can walk on the floor?

Light foot traffic is usually possible after 24 hours and normal use after grouting and curing, around two to three days. Heavy furniture should wait until the installer confirms the adhesive has fully cured.

Can porcelain slabs be used on kitchen worktops?

Thin porcelain can clad islands and worktops, but it needs a rigid substrate and careful edge detailing. For worktops we usually recommend 12 mm slabs or a dedicated sintered stone or quartz worktop.

To plan your floor, feature wall or bathroom, send your room sizes and photos to FIXORA Decor on WhatsApp +971501962136 or request a quotation. We will recommend the finish, check access and give you a clear supply-and-install price for your home in Dubai.

اکثر پوچھے جانے والے سوالات

Often yes, if the existing tiles are firmly bonded, flat and free of hollow spots. We tap-test and check flatness first. Over-tiling raises the floor by around 10–12 mm, so door bottoms and transitions to other rooms need planning.

Polished finishes can be slippery when wet. For kitchens, bathrooms and areas near terraces or pools, we recommend satin or matt finishes, which still look premium but offer more grip.

Most residential service lifts in Dubai accept a 240 cm slab carried upright on an A-frame, but not all. We check the lift car height and diagonal during the site survey; if it will not fit, we can supply a smaller format or plan stair access.

Light foot traffic is usually possible after 24 hours and normal use after grouting and curing, around two to three days. Heavy furniture should wait until the installer confirms the adhesive has fully cured.

Thin porcelain can clad islands and worktops, but it needs a rigid substrate and careful edge detailing. For worktops we usually recommend 12 mm slabs or a dedicated sintered stone or quartz worktop. To plan your floor, feature wall or bathroom, send your room sizes and photos to FIXORA Decor on WhatsApp +971501962136 or request a quotation . We will recommend the finish, check access and give you a clear supply-and-install price for your home in Dubai.

صارفین کے ریویوز

ابھی تک کوئی ریویو نہیں۔ اپنا تجربہ شیئر کرنے والے پہلے فرد بنیں۔

ریویو لکھیں

    سوالات و جوابات

    ابھی کوئی سوال نہیں۔ سب سے پہلے سوال پوچھیں۔

    آپ کو یہ بھی پسند آ سکتے ہیں

    ہماری خدمات