夏季优惠:空调深度清洗立减 20% — 请于六月 30 日前预约立即预约
跳至内容

规格参数

SKU
FX-F-005
分类
卫浴配件
单位
set
重量
7.8 kg
Type
exposed thermostatic
Finish
chrome, matt black, brushed nickel, brushed gold
Head Size
250 mm, 300 mm, 400 mm

配送与安装

  • 本地快速配送
  • 专业安装
  • 含保修

立即下单,预计送达 11月20日周五 – 11月23日周一

收货后 7 天内可退货;退货运费由顾客承担。

预约安装

资料下载

卫浴配件省 16%库存:30

恒温雨淋花洒系统,300 mm 顶喷和手持花洒,明装立柱

AED 2,362.50AED 2,824.50

价格已含 5% 增值税。 · SKU: FX-F-005

Type
Finish
Head Size

请选择您想要的选项,并在订单备注中或通过 WhatsApp 告知我们——发货前我们会确认是否有货。

立即下单,预计送达 11月20日周五 – 11月23日周一

明装恒温淋浴立柱,带 300 mm 方形雨淋顶喷、三模式手持花洒、防烫安全锁和易清洁硅胶出水嘴。无需破墙。

咨询此商品获取此商品报价

快速解答

明装恒温淋浴立柱,带 300 mm 方形雨淋顶喷、三模式手持花洒、防烫安全锁和易清洁硅胶出水嘴。无需破墙。 A thermostatic rain shower system combines a large overhead rain head, a hand shower and a thermostatic valve that keeps water at a steady, safe temperature even when someone opens another tap in the house.

关键信息

  • In Dubai, a quality exposed rain shower column like this 300 mm set costs about AED 1,500 to AED 3,500 supplied, with fitting extra.
  • The listed price of AED 2,250 covers the complete shower column.
  • Fitting to existing outlets: about AED 250 to AED 450.

最后更新:

商品描述

A thermostatic rain shower system combines a large overhead rain head, a hand shower and a thermostatic valve that keeps water at a steady, safe temperature even when someone opens another tap in the house. In Dubai, a quality exposed rain shower column like this 300 mm set costs about AED 1,500 to AED 3,500 supplied, with fitting extra. Because it mounts on the wall surface, FIXORA Decor can usually install it in an afternoon without breaking tiles.

Thermostatic rain shower system overview

This set includes a thermostatic bar valve, a rigid riser column, a 300 mm square overhead rain head, a three-mode hand shower with hose and a diverter to switch between them. The thermostatic cartridge mixes hot and cold water to your chosen temperature and holds it there. A safety button stops the temperature from going above about 38 degrees Celsius unless you press it deliberately, protecting children and older family members from scalding.

The rain head is slim stainless steel with silicone nozzles that you can rub clean. The hand shower offers rain, massage and mist modes and slides on its own holder, so it can be used at different heights or as a rinse spray when cleaning the shower area. The column height is adjustable within a range, which helps when you are replacing an old shower with existing fixing points.

The exposed design is the main advantage for renovations. A concealed rain shower requires cutting into the wall to install a valve box, then retiling and waterproofing. An exposed column connects to the existing hot and cold outlets of a standard shower mixer, usually at 150 mm centres, so it transforms the bathroom without demolition.

Who this rain shower set is for

  • Apartment owners and tenants in JVC, Dubai Marina, Al Barsha, International City and Sharjah who want a hotel-style shower without tiling work. With the landlord's agreement, the old mixer can be refitted when you move out.
  • Villa owners refreshing guest bathrooms and maid's-room bathrooms in Mirdif, The Springs or Arabian Ranches on a reasonable budget.
  • Families with children or elderly parents, because the thermostatic safety stop reduces scalding risk.
  • Holiday-home operators who want a consistent shower experience that guests rate well.
  • Homes with fluctuating pressure, where cold water suddenly dropping when someone flushes a toilet makes ordinary mixers jump from warm to hot.

Specifications

PropertyDetail
TypeExposed thermostatic shower column
Valve bodyBrass, chrome or matt black finish
Thermostatic cartridgeWax-element, with 38 degree Celsius safety stop
Overhead shower300 x 300 mm square, stainless steel, silicone nozzles
Hand showerThree modes: rain, massage, mist
Hose1.5 m anti-twist hose
DiverterTwo-way, overhead or hand shower
Riser heightAdjustable, approximately 900 to 1,250 mm
Inlet centres150 mm plus or minus 15 mm with S-unions
Connection1/2-inch
Recommended pressureApproximately 1.5 to 5 bar, balanced hot and cold

Sizes and variants

  • Overhead size: 250 mm for compact showers, 300 mm (this set) for most bathrooms, and 400 mm for large walk-in showers.
  • Head shape: square or round.
  • Finishes: polished chrome, matt black, brushed nickel and brushed gold.
  • With tub spout: a three-way version with a bath filler, for combined bath and shower areas.
  • Concealed version: a built-in valve with wall arm and separate hand shower, for full bathroom renovations where tiles are being replaced anyway.

UAE water hardness and humidity notes

Limescale is the biggest enemy of rain showers in the UAE. Hard water deposits minerals in nozzles, causing spray to go sideways or nozzles to block. The silicone nozzles on this head are designed to be cleaned by rubbing with your fingers every week or two. Every few months, remove the hand shower and soak it in diluted vinegar.

Thermostatic cartridges also suffer in hard water because scale forms on the filter screens at the inlets and inside the cartridge. Symptoms include water that is not as hot as it should be, or a temperature that drifts. Cleaning the inlet filters yearly and servicing the cartridge every few years keeps it responsive. A whole-house softener or a filter on the main supply reduces this maintenance considerably.

In summer, the cold water from rooftop tanks in many villas and low-rise buildings can come out very warm, sometimes warmer than you want for a shower. A thermostatic valve cannot make water colder than the cold supply, so in July and August you may get a warm shower even on full cold. Insulating tanks and pipes, or switching off the water heater at peak summer, helps.

Bathroom humidity also matters. Poor extraction lets condensation sit on fittings and grout, encouraging mould. Make sure your bathroom extractor works and runs for 15 to 20 minutes after showers. Matt black and brushed finishes should be wiped dry to prevent water marks.

Installation

  1. Inspection: we check the existing hot and cold outlets, their spacing and the wall material. Thermostatic valves need hot on the left and cold on the right; if reversed, we use a reversed cartridge or rework the connections.
  2. Pressure check: we test pressure on both supplies. Large differences between hot and cold pressure reduce performance, and a balancing valve or pump may be recommended.
  3. Remove the old mixer and fit the S-unions with fresh sealing.
  4. Fit the valve, then mark and drill the bracket for the riser, using the correct anchors for tiles over blockwork or plasterboard.
  5. Assemble the riser, overhead shower, hand shower and hose.
  6. Flush and calibrate: we flush debris, set the temperature calibration to about 38 degrees Celsius at the safety stop, and test for leaks.

Installation usually takes two to four hours. Drilling through tiles is done with diamond bits and silicone-sealed fixings to protect the waterproofing behind.

Choosing the right head size and height

Bigger is not always better. A 400 mm head needs good, steady pressure and a shower area of at least about 1,000 x 1,000 mm, otherwise water sprays onto the glass and floor outside the tray. For a typical apartment shower of 900 x 900 mm or a bath with a screen, 250 to 300 mm gives a full, enveloping rain without excessive splashing.

Height also matters. The rain head should sit roughly 200 to 300 mm above the head of the tallest regular user, which usually means 2,000 to 2,200 mm from the finished floor. Too low and tall family members duck; too high and the water spreads and cools before it reaches you. In bathrooms with a false ceiling, we check the ceiling height and the position of the exhaust fan and lights before fixing the column.

Finally, consider who uses the shower. Households with children often use the hand shower more than the overhead, so we position the hand shower holder low enough for them to reach.

Maintenance

  • Rub nozzles weekly to remove limescale.
  • Wipe the column and valve dry after use, especially black and brushed finishes.
  • Clean the inlet filters once a year.
  • Service or replace the thermostatic cartridge if temperature becomes unstable.
  • Replace the hose if it kinks, cracks or leaks at the ends; it is a wear part.
  • Use mild soap and water only; avoid abrasive pads and strong acidic cleaners.

Exposed thermostatic vs concealed vs manual mixer

OptionWall workTemperature stabilityLookIndicative supply price (AED)
Exposed thermostatic column (this product)None, connects to existing outletsExcellentModern, visible pipe1,500 to 3,500
Concealed thermostatic systemWall chasing, waterproofing, retilingExcellentCleanest, minimal2,500 to 7,000 plus works
Exposed manual mixer columnNoneCan fluctuateSimilar look700 to 1,600
Basic mixer with handheld showerNoneCan fluctuateBasic250 to 700

If you are fully renovating the bathroom and replacing tiles, a concealed system gives the cleanest result. If the tiles are in good condition, the exposed thermostatic column delivers most of the benefit for a fraction of the total cost and disruption.

Price guidance

The listed price of AED 2,250 covers the complete shower column. Indicative 2026 extras depending on scope:

  • Fitting to existing outlets: about AED 250 to AED 450.
  • Correcting reversed hot and cold outlets or wrong spacing: from about AED 300, depending on access.
  • Pressure balancing valve or small booster pump: quoted after testing.
  • Concealed installation as part of a bathroom renovation: quoted with the full project.

All prices are subject to 5 percent VAT. Use our quote page for a fixed price after a short site visit.

Warranty notes

Shower systems usually carry a manufacturer warranty on the valve body and cartridge against manufacturing defects, with shorter cover on hoses, hand showers and finishes. Warranties generally exclude limescale build-up, damage from harsh chemicals, and faults caused by poor water quality or debris in pipes. Our workmanship guarantee covers our installation and leak-free connections. Full terms are confirmed on your quotation.

Key takeaways

  • An exposed thermostatic column upgrades a shower without breaking tiles.
  • The 38 degree safety stop protects children and elderly family members.
  • Hard water is the main maintenance issue; clean nozzles and filters regularly.
  • In summer, warm cold-water supply from tanks limits how cool the shower gets.
  • Choose concealed only if you are retiling anyway.

Frequently asked questions

How much does it cost to install a rain shower in Dubai?

An exposed rain shower column fitted to existing outlets typically costs about AED 1,800 to AED 4,000 including the product, as an indicative range. Concealed rain showers in a full renovation cost more because of wall and tiling work.

Can I install a rain shower in a rented apartment?

Usually yes with an exposed column, as it uses existing outlets. Get the landlord's written approval first and keep the original mixer to refit when you leave.

Why is my rain shower pressure weak?

Large heads need reasonable pressure. Low supply pressure, blocked nozzles, or scale in the inlet filters are the common causes. We test pressure before recommending a head size.

What is the difference between thermostatic and normal mixer showers?

A thermostatic valve holds a set temperature and compensates for pressure changes. A normal mixer only blends water, so the temperature changes when someone uses water elsewhere.

Is matt black hard to keep clean?

It shows water spots more than chrome in hard water. Wiping with a soft cloth after showering keeps it looking new.

Ready for a better shower? WhatsApp FIXORA Decor on +971501962136 or call +971 50 196 2136 to book a plumber in Dubai, or see our bathroom renovation services.

常见问题

An exposed rain shower column fitted to existing outlets typically costs about AED 1,800 to AED 4,000 including the product, as an indicative range. Concealed rain showers in a full renovation cost more because of wall and tiling work.

Usually yes with an exposed column, as it uses existing outlets. Get the landlord's written approval first and keep the original mixer to refit when you leave.

Large heads need reasonable pressure. Low supply pressure, blocked nozzles, or scale in the inlet filters are the common causes. We test pressure before recommending a head size.

A thermostatic valve holds a set temperature and compensates for pressure changes. A normal mixer only blends water, so the temperature changes when someone uses water elsewhere.

It shows water spots more than chrome in hard water. Wiping with a soft cloth after showering keeps it looking new. Ready for a better shower? WhatsApp FIXORA Decor on +971501962136 or call +971 50 196 2136 to book a plumber in Dubai, or see our bathroom renovation services .

顾客评价

暂无评价。快来分享您的使用体验吧。

撰写评价

    问答

    暂无问题,快来提第一个问题吧。

    您可能还喜欢

    服务区域