夏季优惠:空调深度清洗立减 20% — 请于六月 30 日前预约立即预约
跳至内容

规格参数

SKU
FX-E-007
分类
管道与供水
单位
kit
重量
2.1 kg
Sensors
4 included, Expandable to 32
Valve size
1/2 inch, 3/4 inch, 1 inch
Connectivity
Wi-Fi, Ethernet

配送与安装

  • 本地快速配送
  • 专业安装
  • 含保修

立即下单,预计送达 11月20日周五 – 11月23日周一

收货后 7 天内可退货;退货运费由顾客承担。

预约安装

资料下载

管道与供水省 13%库存:22

智能漏水传感器套装,带电动自动关闭阀

AED 1,207.50AED 1,386.00

价格已含 5% 增值税。 · SKU: FX-E-007

Sensors
Valve size
Connectivity

请选择您想要的选项,并在订单备注中或通过 WhatsApp 告知我们——发货前我们会确认是否有货。

立即下单,预计送达 11月20日周五 – 11月23日周一

四个无线漏水传感器、一个网关和一个电动关闭阀,在您的阿联酋住宅检测到漏水时自动关闭总水源。

咨询此商品获取此商品报价

快速解答

A smart water leak sensor kit warns you on your phone the moment water appears where it should not, and this kit goes further by closing your main water supply automatically with a motorised valve. It includes four wireless sensors, a hub and a valve actuator for 1/2 to 1 inch pipes.

关键信息

  • This page covers who the leak sensor kit is for, specifications, compatibility with UAE plumbing, climate considerations, installation and approvals, maintenance, alternatives, indicative 2026 prices and warranty notes.
  • A typical installation by FIXORA Decor takes 1.5–3 hours:
  • Kit supplied and installed on a working ball valve: roughly AED 1,400–1,700.

最后更新:

商品描述

A smart water leak sensor kit warns you on your phone the moment water appears where it should not, and this kit goes further by closing your main water supply automatically with a motorised valve. It includes four wireless sensors, a hub and a valve actuator for 1/2 to 1 inch pipes. For UAE apartments and villas that are left empty during summer travel, it is one of the most cost-effective ways to avoid a flooded floor, damaged joinery and a dispute with the neighbours downstairs.

This page covers who the leak sensor kit is for, specifications, compatibility with UAE plumbing, climate considerations, installation and approvals, maintenance, alternatives, indicative 2026 prices and warranty notes.

Water leak sensor kit with auto shut-off: overview

Water damage is a common insurance and maintenance issue in UAE homes. Typical causes include a burst flexible hose under a basin, a failed water heater in a ceiling void or loft, a blocked AC condensate drain overflowing into the false ceiling, a leaking washing machine connection or a cracked PPR joint behind a kitchen unit. When the home is occupied, someone usually notices quickly. When the family is away for the summer or on Eid holidays, a small leak can run for weeks.

The kit works in three steps:

  1. Detect: battery sensors placed on the floor or in drip trays detect water with metal contacts underneath.
  2. Alert: the hub sends a push notification, sounds a local alarm and can notify several family members or a property manager.
  3. Act: the motorised actuator turns the main valve to closed within seconds, stopping water flow until you investigate and reopen it.

What is in the box:

  • 4 x wireless leak sensors with remote probe cables
  • 1 x hub with Wi-Fi and Ethernet
  • 1 x motorised valve actuator with mounting brackets for lever-handle ball valves (1/2 to 1 inch)
  • Power adapter, batteries and mounting accessories

Who it is for

  • Apartment owners and landlords in towers in Dubai Marina, Downtown, JLT and Al Reem, where a leak can damage the apartment below and lead to costly claims.
  • Villa owners with water heaters, AC units and pumps in lofts and ceiling voids.
  • Families who travel for the summer and leave the home empty for weeks.
  • Holiday-home operators who cannot check every unit daily.
  • Offices, clinics and server rooms where water damage means downtime.

Specifications

ItemSpecification
Sensors4 wireless sensors, floor or tray placement, remote probe option
Sensor powerReplaceable batteries, typically 1–2 years depending on check-in interval
Wireless rangeSub-GHz radio for better range through walls; typical indoor range 30–60 m
HubWi-Fi 2.4 GHz and Ethernet, built-in siren, battery backup
Valve actuatorMotorised, fits quarter-turn lever ball valves 1/2–1 inch
Closing timeTypically under 10 seconds
Actuator powerLow-voltage adapter, with manual override
NotificationsPush, multiple users, optional email
ExtrasLow-battery, offline and temperature alerts
ExpandabilityUp to 32 sensors per hub

Compatibility with UAE plumbing

  1. Main valve type. The actuator clamps onto an existing quarter-turn ball valve with a lever handle. Many apartments have a main isolation valve in the kitchen, near the water heater or in a utility cupboard. Gate valves with round wheel handles are not suitable; a plumber can replace them with a ball valve.
  2. Valve condition. Old valves that are stiff or seized will not turn reliably. Valves that have not been operated for years should be tested and, if needed, replaced first.
  3. Pipe size. Suits 1/2, 3/4 and 1 inch valves common in UAE homes. Larger villa mains need a larger motorised valve.
  4. Where the meter is. In towers, the DEWA meter and the building's main supply are usually in a shared riser. Install the valve inside your apartment after the meter, on your side of the supply. Never alter building risers or meters.
  5. Water heater and tank systems. Villas with roof tanks and booster pumps may have more than one supply line, for example a separate line for the garden. Each line you want to protect needs its own valve.

Suitability for the UAE climate

UAE homes face particular leak risks:

  • AC condensate: AC units produce a lot of water in humid months. A blocked drain line often overflows into a false ceiling. Place one sensor in the AC drip tray or on the ceiling tile under the fan-coil, using the remote probe.
  • Water heaters: tanks in lofts and ceiling voids run hot most of the year and can fail at the inlet, outlet or relief valve. A sensor in the heater tray gives early warning.
  • Heat in lofts: villa loft spaces can become very hot in summer. Place the hub in an air-conditioned area and use the remote probe for the sensor in the loft so the battery is not stressed.
  • Hard water: scale build-up in valves is common, so test-operate the valve monthly from the app to keep it free.

Installation and when you need a plumber or electrician

Placing sensors and setting up the hub is a simple task. Fitting the actuator onto an existing ball valve can be done by a careful homeowner, but replacing a seized valve or a gate valve involves isolating the supply and cutting pipe, which should be done by a qualified plumber. If a new socket is needed near the valve for the actuator's adapter, that is electrical work for a qualified electrician. No DEWA approval is normally needed for work on your side of the meter, but towers and communities may require a work permit, and you must not interfere with building risers or meters.

A typical installation by FIXORA Decor takes 1.5–3 hours:

  • Inspection and testing of the main isolation valve; replacement if needed.
  • Mounting the actuator and testing open and close cycles.
  • Placing sensors at the highest-risk points, usually water heater, kitchen sink, washing machine and AC drain.
  • Setting up the hub, alerts and sharing with family members or your property manager.
  • A simulated leak test to confirm the valve closes automatically.

Best places for the four sensors

  • Under or beside the water heater, in its tray if fitted.
  • Under the kitchen sink, where mixer hoses and filter systems are located.
  • Behind the washing machine or dishwasher.
  • Under the AC fan-coil or in the condensate tray, or in the bathroom with the most connections.

Maintenance

  • Run the valve exercise function monthly; many homeowners schedule it automatically.
  • Replace sensor batteries when the app warns you.
  • Test each sensor every six months by touching the contacts with a damp cloth.
  • Keep sensors dry and clean; wipe off dust and soap residue.
  • Before travelling, check that all devices show online and that alerts reach every family member.

Leak sensor kit vs alternatives

OptionDetectsStops waterBest forIndicative cost (AED)
Stand-alone leak alarmYes, local beep onlyNoOccupied homes40–100 each
Wi-Fi leak sensors without valveYes, phone alertsNoApartments with nearby help100–250 each
This kit with auto shut-offYes, phone and sirenYes, automaticHomes left empty, landlords1,150
Flow-monitoring smart valveDetects unusual flow, even hidden leaksYesVillas, high-value interiors2,500–5,000+
Closing the main valve before travelNoYes, manuallySimple, free0, but AC drains and heaters still need checks

Price guidance

The kit price covers four sensors, hub and actuator, with VAT applied at checkout. Indicative 2026 ranges in Dubai:

  • Kit supplied and installed on a working ball valve: roughly AED 1,400–1,700.
  • Including replacement of the main isolation valve: roughly AED 1,700–2,200.
  • Extra sensors: priced per sensor, commonly added for additional bathrooms and AC units.
  • Villas with multiple supply lines: quoted after survey.

These indicative ranges depend on valve condition, access and the number of sensors, and are confirmed after a site visit.

Warranty notes

The hub, sensors and actuator carry a manufacturer warranty against defects, with the period on the invoice. Batteries are consumables. The warranty covers the device, not water damage to the property; check your home insurance for that. Damage from submersion of the hub, incorrect fitting by others or forcing the actuator onto a seized valve is normally excluded. FIXORA Decor covers its installation workmanship separately.

Key takeaways

  • Sensors detect leaks early; the motorised valve stops the water automatically.
  • Ideal for homes left empty in summer and for landlords of tower apartments.
  • The main valve must be a working quarter-turn ball valve on your side of the meter.
  • Cover the water heater, kitchen sink, washing machine and AC drain first.

Frequently asked questions

Will the valve close if the internet is down?

Yes. The hub and valve communicate locally, so automatic shut-off works without internet. You will receive the phone alert once the connection returns, while the siren sounds immediately.

Can I install it in a rented apartment?

Yes, with landlord approval. The actuator clamps onto the existing valve and can be removed at the end of the lease.

Does it detect leaks inside walls?

Only where water reaches a sensor. For hidden pipe leaks, a flow-monitoring smart valve that spots unusual water use is a better option.

How do I reopen the water after a leak alert?

Fix or isolate the leak, dry the sensor, then reopen the valve from the app or with the manual override on the actuator.

Will it reduce my DEWA water bill?

It stops major leaks quickly, which avoids wasted water, but it is a protection device rather than a water-saving device.

Protect your home before your next trip. FIXORA Decor supplies and installs leak detection and shut-off systems across the UAE. Message us on WhatsApp at +971501962136 or request a quotation.

常见问题

Yes. The hub and valve communicate locally, so automatic shut-off works without internet. You will receive the phone alert once the connection returns, while the siren sounds immediately.

Yes, with landlord approval. The actuator clamps onto the existing valve and can be removed at the end of the lease.

Only where water reaches a sensor. For hidden pipe leaks, a flow-monitoring smart valve that spots unusual water use is a better option.

Fix or isolate the leak, dry the sensor, then reopen the valve from the app or with the manual override on the actuator.

It stops major leaks quickly, which avoids wasted water, but it is a protection device rather than a water-saving device. Protect your home before your next trip. FIXORA Decor supplies and installs leak detection and shut-off systems across the UAE. Message us on WhatsApp at +971501962136 or request a quotation .

资料来源

顾客评价

暂无评价。快来分享您的使用体验吧。

撰写评价

    问答

    暂无问题,快来提第一个问题吧。

    您可能还喜欢

    即热式电热水器,10 升
    即热式电热水器,10 升

    AED 682.50

    0.5 HP 增压水泵
    0.5 HP 增压水泵

    AED 609.00

    全屋净水系统省 12%
    全屋净水系统

    AED 1,522.50AED 1,732.50

    3 级厨下净水系统
    3 级厨下净水系统

    AED 441.00

    服务区域