Offre d'été : -20 % sur le nettoyage en profondeur de la climatisation — réservez avant le 30 juinRéserver
Aller au contenu

Rénovation d'une boutique de téléphonie mobile à Deira

Rénovation d'une boutique de téléphonie mobile à Deira : un local de 60 m² en rez-de-chaussée doté de comptoirs vitrés sécurisés, d'un nouveau rideau métallique, d'une façade repeinte, d'un éclairage LED et d'un recâblage complet en quatre semaines phasées pendant que la boutique continuait de vendre.

Réponse rapide

Rénovation d'une boutique de téléphonie mobile à Deira : un local de 60 m² en rez-de-chaussée doté de comptoirs vitrés sécurisés, d'un nouveau rideau métallique, d'une façade repeinte, d'un éclairage LED et d'un recâblage complet en quatre semaines phasées pendant que la boutique continuait de vendre.

Points clés

  • Item Detail Location Deira, Dubai Unit Ground-floor mobile phone and accessories shop Area 60 m² Client Electronics retailer Duration 4 weeks Completed January 2024 The brief

Dernière mise à jour :

This mobile phone shop refurbishment in Deira gave a ground-floor electronics retailer a brighter, more secure store with a refreshed street frontage. Over a four-week phased programme, FIXORA Decor stripped out the old unit, installed secure glazed display counters, replaced the roller shutter, repainted the façade, upgraded lighting, ceiling and flooring, and rewired the shop with a new distribution board and CCTV containment, while the shop kept trading.

Below we explain the brief and how the phasing worked, then share practical guidance for shop owners in Deira and other street-retail areas of Dubai planning a refurbishment of a high-value retail unit.

Project at a glance

ItemDetail
LocationDeira, Dubai
UnitGround-floor mobile phone and accessories shop
Area60 m²
ClientElectronics retailer
Duration4 weeks
CompletedJanuary 2024

The brief

A mobile phone and accessories retailer in Deira wanted a full refurbishment of a tired unit, with a layout that improved security for high-value stock while presenting a modern retail frontage.

Phone and electronics shops face a specific combination of needs. Stock is small, valuable and easy to pocket, so display and storage must be secure. At the same time, customers want to see and handle products, and a dark, cluttered shop loses passing trade to the bright store next door. In a busy street-retail district like Deira, the frontage does a lot of the selling.

Scope of work

  • Strip-out of old shelving, flooring and ceiling tiles
  • New glazed display counters with lockable storage beneath, built to a secure specification
  • Shopfront roller shutter replacement and repainting of the façade within landlord guidelines
  • LED display lighting, new ceiling grid and vinyl flooring
  • Electrical rewiring to current standards with a new distribution board and CCTV first-fix containment

Challenges and how they were handled

Keeping the shop open

The shop needed to stay open for as much of the works as practical, so FIXORA Decor phased the refurbishment into sections, moving stock and trading from a temporary counter while each zone was completed.

Landlord approval for the frontage

Coordinating landlord approval for the shopfront repaint and shutter replacement added a short lead time that was built into the programme from the outset. Building owners often have guidelines on façade colours, shutter types and signage to keep a consistent appearance along the street.

How phased retail refurbishment works

Phasing lets a shop keep earning while it is refurbished, but it needs more planning than closing the shop completely. On projects like this we typically:

  1. Divide the shop into zones, for example back-of-house, one side wall, the other side wall and the front.
  2. Set up a temporary counter in a zone that is not being worked on, with secure storage for stock.
  3. Complete services that affect the whole unit at quiet times. Distribution board replacement and main rewiring need short shutdowns, which are best scheduled outside trading hours.
  4. Finish one zone fully before moving stock into it and starting the next.
  5. Screen work areas from customers with temporary partitions to control dust and keep the public away from tools.
  6. Do the frontage last or out of hours, as the shutter is the shop's security at night.

Phasing usually adds some time compared with a full closure, and there may be a few partial trading days. For many retailers, keeping some income and keeping regular customers is worth it.

Designing for security and sales

Security in a phone shop works best when it is designed in, not added afterwards:

  • Glazed counters with lockable storage let customers see stock while keeping it behind glass, with backup stock stored securely below.
  • Staff positioned behind counters with clear sightlines to the door and the whole floor.
  • CCTV containment installed during the electrical works, so cameras can be added or moved later without surface cables.
  • A robust roller shutter appropriate to the shop's exposure and the landlord's guidelines.
  • Good, even lighting that removes dark corners, which helps both display and camera coverage.

Display lighting is especially important for electronics, where screens, glossy cases and accessories need clean, glare-free light. A neutral white colour temperature and a high colour rendering index show products accurately. Our LED lighting guide explains these terms, and our article on lighting and layout that sells applies them to retail.

Finishes that cope with street retail in Dubai

A ground-floor shop on a busy Deira street deals with conditions that a mall unit is partly shielded from. Dust blows in every time the door opens, sand is tracked in on shoes, and the shopfront faces full sun and summer heat. Finishes should be chosen with that in mind:

  • Flooring that resists scratching from grit and is easy to mop daily. Commercial-grade vinyl, as used here, is a practical choice; a mat zone at the entrance helps catch sand.
  • Ceiling grids with removable tiles, which give easy access to wiring, CCTV cables and AC ducts without damaging the ceiling.
  • Counter tops and glass that can be cleaned frequently without clouding or scratching.
  • Exterior paint suited to UV exposure and heat, applied to a well-prepared surface so it does not chalk or peel quickly. Our painting service covers exterior work.
  • Shutters that are serviced periodically, since sand and dust in the guides make them harder to operate over time.

Electrical upgrades in older Deira units

Many Deira shops have been fitted out several times over the years, often with added sockets and circuits that were never planned as a whole. A phone shop adds load from display lighting, charging stations, demo devices, CCTV and air conditioning. Rewiring to current standards with a new distribution board, as in this project, makes the installation safer and easier to maintain. Electrical work in Dubai must follow DEWA regulations, and any changes to fire alarm or life safety systems are subject to Dubai Civil Defence requirements, so check what applies to your unit before work starts.

Approvals for a shop refurbishment

For a street-retail unit, approvals usually involve:

  • The landlord or building owner, for internal works and especially for façade, shutter and signage changes
  • Dubai Municipality or the relevant authority, depending on the scope and any signage changes
  • Dubai Civil Defence, where fire and life safety systems are affected

Requirements vary with the scope, so confirm the current process with the landlord and the relevant authority early, as this project did. Our guide to Dubai Civil Defence approval for fit-outs explains how that process usually works.

What affects the cost

As a typical / indicative 2026 range used on our site, a full retail fit-out for street or community retail is around AED 150–400 per sq ft excluding 5% VAT, stock and most loose fixtures, depending on scope and confirmed after a site survey. A refurbishment can fall anywhere within or below that range depending on what is retained. See our mall vs street retail fit-out cost guide.

Cost factorWhy it matters
Display countersGlazed, lockable, secure counters cost more than open shelving
Electrical worksFull rewiring and a new distribution board are significant but essential items
Shopfront and shutterShutter type, size and landlord specification affect price
PhasingWorking around trading adds time and some out-of-hours work
Ceiling and flooringGrid ceilings and vinyl floors are cost-effective; premium finishes add cost

Planning checklist for shop owners

  • Read your lease and the landlord's shopfront guidelines before designing.
  • Decide whether to close or phase the works, and plan trading around it.
  • Plan security first: counters, storage, sightlines, CCTV and shutter.
  • Have the electrical installation assessed before finalising the layout.
  • Choose durable, easy-to-clean flooring for high footfall; see our flooring service.
  • Allow lead time in the programme for landlord and authority approvals.
  • Keep a temporary secure storage plan for stock during the works.

For other retail work nearby, see our mall perfume kiosk fit-out in Deira, and for ongoing support across multiple stores, our multi-site maintenance contract for a retail chain.

Result

The shop reopened in full with a brighter, more secure retail environment and a refreshed street frontage. The phased approach meant the client lost only a handful of partial trading days across the whole project.

Key takeaways

  • Phasing can keep a shop trading during a full refurbishment.
  • Security for high-value stock should be designed into counters and layout.
  • Rewiring older units is often necessary as electrical loads grow.
  • Landlord approval for the frontage needs lead time in the programme.
  • Bright, accurate display lighting helps electronics sell.

Frequently asked questions

Can a shop stay open during a refurbishment in Dubai?

Often yes. On this project the works were phased into sections with a temporary counter, so the shop lost only a handful of partial trading days.

How long does a small shop refurbishment take?

This 60 m² phone shop was refurbished in four weeks. Duration depends on scope, phasing and approval lead times.

Do I need landlord approval to change my shopfront?

Usually yes. Landlords often have guidelines for façade colours, shutters and signage, and some changes may also need authority approval.

What is CCTV first-fix containment?

It is the conduit and back boxes installed during electrical works so cameras can be fitted later with hidden cables.

What lighting is best for a phone shop?

Even, glare-free LED lighting in a neutral white with good colour rendering shows screens and products accurately.

Plan your shop refurbishment

If your shop in Deira or elsewhere in Dubai needs a refresh, FIXORA Decor can survey the unit, plan phasing around your trading and manage landlord approvals. Call +971 50 196 2136, message us on WhatsApp at +971501962136, or request a quote. Learn more about our turnkey fit-out and renovation service.

Galerie

Questions fréquentes

Often yes. On this project the works were phased into sections with a temporary counter, so the shop lost only a handful of partial trading days.

This 60 m² phone shop was refurbished in four weeks. Duration depends on scope, phasing and approval lead times.

Usually yes. Landlords often have guidelines for façade colours, shutters and signage, and some changes may also need authority approval.

It is the conduit and back boxes installed during electrical works so cameras can be fitted later with hidden cables.

Even, glare-free LED lighting in a neutral white with good colour rendering shows screens and products accurately.

Sources

Lancez votre projet

Notre équipe est prête à vous aider — obtenez un devis gratuit dès aujourd’hui.

Ou appelez-nous+971 50 196 2136

Nous intervenons à