Summer offer: 20% OFF sa AC deep cleaning — mag-book bago mag-30 HunyoMag-book na
Lumaktaw sa nilalaman

Mga detalye

SKU
FX-D-006
Kategorya
Pintura at Coating
Yunit
kit
Timbang
24 kg
Contents
Primer, Membrane, Tape, Corners, Pipe collars, Drain collar
Coverage
Up to 10 m² at two coats

Delivery at pagkakabit

  • Mabilis na lokal na delivery
  • Propesyonal na pagkakabit
  • May kasamang warranty

Mag-order na, tinatayang delivery Miy, Nob 18 – Sab, Nob 21

Tumatanggap ng pagbabalik sa loob ng 7 araw mula sa delivery; ang customer ang magbabayad ng pagpapadala pabalik.

Mag-book ng pagkakabit

Mga dokumento

Pintura at CoatingMakatipid ng 13%May stock: 60

Bathroom Waterproofing Kit, Flexible na Cementitious Membrane, hanggang 10 m²

AED 472.50AED 546.00

Kasama na sa presyo ang 5% VAT. · SKU: FX-D-006

Contents
Coverage

Piliin ang gusto mong opsyon at banggitin ito sa mga tala sa order o sa WhatsApp — kinukumpirma namin kung available bago ipadala.

Mag-order na, tinatayang delivery Miy, Nob 18 – Sab, Nob 21

Kumpletong wet-room kit: primer, two-part na flexible cementitious membrane, reinforcing tape, corner at pipe collar para sa isang shower o banyo.

Idagdag sa listahanMag-sign in para magamit ito

Magtanong tungkol sa produktong itoHumingi ng quotation para sa produktong ito

Mabilis na sagot

Kumpletong wet-room kit: primer, two-part na flexible cementitious membrane, reinforcing tape, corner at pipe collar para sa isang shower o banyo. This kit contains everything needed for one bathroom or shower area of up to about 10 m² at two coats: primer, a two-part flexible cementitious membrane, reinforcing tape, pre-formed corners, pipe collars and a drain collar.

Mahahalagang detalye

  • Indicative 2026 price is AED 450 per kit, excluding application and 5% VAT.
  • Coverage Up to approximately 10 m² at two coats
  • Single shower kit: up to 10 m², suitable for a typical shower enclosure plus floor.

Huling na-update:

Paglalarawan

A bathroom waterproofing kit is the protective layer that goes under tiles in showers and wet rooms to stop water seeping into the slab, the walls and the apartment below. This kit contains everything needed for one bathroom or shower area of up to about 10 m² at two coats: primer, a two-part flexible cementitious membrane, reinforcing tape, pre-formed corners, pipe collars and a drain collar. Indicative 2026 price is AED 450 per kit, excluding application and 5% VAT.

Water leaks are among the most common and most disruptive maintenance problems in UAE apartments and villas. A failed shower tray can stain the ceiling of the unit below, cause disputes with neighbours and building management, and lead to mould inside walls. People searching for "bathroom waterproofing Dubai", "shower leaking into downstairs flat" or "waterproofing before tiling" need to know which system to use and how to apply it correctly. This page covers both.

Bathroom waterproofing kit overview

Tiles and grout are not waterproof on their own. Grout is porous, and over time water passes through joints and hairline cracks. The waterproofing membrane is a continuous, flexible layer beneath the tile adhesive that keeps that water on the surface and directs it to the drain.

This kit uses a polymer-modified cementitious membrane: a powder mixed with a liquid polymer that cures into a thin, flexible, crack-bridging coating. Cementitious membranes bond well to screed, cement board and plaster, and tile adhesives bond well to them, which is why they are widely used under tiles in UAE bathrooms.

What is in the kit

ComponentPurpose
PrimerConsolidates dusty surfaces and improves adhesion
Two-part flexible membrane (powder + liquid)Main waterproof layer, applied in two coats
Reinforcing tape rollBridges wall-floor and wall-wall joints and board seams
Internal and external cornersPre-formed pieces for clean, sealed corners
Pipe collarsSeal shower mixer, spout and supply penetrations
Drain collarSeals the membrane to the floor drain
Instruction sheetMixing ratios, coverage and curing times

Who this kit is for

  • Bathroom renovation contractors and handymen retiling showers in apartments and villas.
  • Homeowners renovating a bathroom who want the right product specified, even if a professional applies it.
  • Landlords and facility managers dealing with recurring leaks in older buildings in Al Barsha, Deira, Bur Dubai, Sharjah and Abu Dhabi.
  • Villa owners converting a maid's room bathroom or adding a shower to an outdoor pool cabana.

It is designed for showers, bathroom floors, laundry rooms and small wet areas. For roofs, balconies exposed to sun, swimming pools and basements, different systems are needed.

Specifications

PropertyDetail
Membrane typeTwo-component polymer-modified cementitious, flexible
CoverageUp to approximately 10 m² at two coats
Total dry thicknessAround 2 mm (two coats)
Crack bridgingFlexible enough to bridge fine hairline cracks
SubstratesCement screed, sand-cement render, cement board, concrete
Compatible finishesCeramic and porcelain tiles, natural stone with suitable adhesive
Recoat timeA few hours between coats, depending on temperature
TilingAfter full drying as per instructions, typically next day
Kit weightApproximately 24 kg

Variants and add-ons

  • Single shower kit: up to 10 m², suitable for a typical shower enclosure plus floor.
  • Large bathroom bundle: two kits plus extra tape for master bathrooms and wet rooms.
  • Extra tape and corners: for bathrooms with niches, benches and many corners.
  • Linear drain collar: for walk-in showers with linear channel drains.

UAE climate suitability

  • Heat during application: in summer, unconditioned bathrooms during renovation can be extremely hot, making the membrane skin too fast. Apply in the cooler part of the day or with the AC running, and keep packs out of direct sun.
  • Humidity: high humidity slows curing. Allow extra time before flood testing and tiling.
  • Building movement: high-rise towers move slightly with temperature and wind. The membrane's flexibility and tape at joints help it cope.
  • Hard water: UAE water leaves limescale, which does not affect the membrane but means grout and silicone need maintenance to keep water on the surface.

Application process

  1. Prepare the substrate: remove old tiles and adhesive down to a sound base. Check floor falls to the drain; correct them with screed if water ponds.
  2. Clean and prime: remove dust and apply primer.
  3. Detail first: embed tape into a first stripe of membrane at all wall-floor and wall-wall joints. Fit corners, pipe collars and the drain collar.
  4. First coat: mix powder and liquid as instructed and apply by brush or roller, typically to the full floor and up the walls at least in the shower area, and a turn-up around the rest of the room.
  5. Second coat: once dry, apply the second coat at right angles to the first for even thickness.
  6. Flood test: after curing, plug the drain and fill the floor with water for 24 to 48 hours, checking below for any sign of leakage. Many building managements request this test before tiling is allowed.
  7. Tile: fix tiles with a compatible adhesive, then grout and seal all junctions with sanitary silicone.

Common waterproofing mistakes to avoid

Most bathroom leaks we investigate in Dubai, Sharjah and Abu Dhabi come down to a handful of avoidable errors rather than a faulty product:

  • Skipping corners and joints: applying membrane to flat areas but not reinforcing the wall-floor junction, which is where buildings move and water collects.
  • Not sealing pipe penetrations: the mixer valve, shower arm and supply pipes pass through the membrane. Without collars, water tracks along the pipe into the wall.
  • Poor drain detailing: the membrane must be sealed into the drain body or collar. A gap around the drain is the single most common failure point.
  • Single thin coat: one coat often leaves pinholes and thin spots. Two coats in different directions give consistent thickness.
  • No flood test: tiling immediately saves a day or two but removes the chance to catch problems before they are hidden.
  • Wrong adhesive: use a tile adhesive that is compatible with the membrane, as stated in the instructions.
  • Flat floors: without a fall towards the drain, water ponds and finds its way through grout over time.

Avoiding these mistakes is the main reason to have wet-area waterproofing done by an experienced team, even when the materials themselves are inexpensive compared with the cost of repairing a leak into the unit below.

Maintenance and care

Once tiled over, the membrane needs no direct care, but the surface layers protect it:

  • Replace mouldy or cracked silicone at shower trays, screens and wall corners when it deteriorates.
  • Check grout lines for cracks and regrout where needed.
  • Keep floor drains clear of hair and soap build-up so water does not pond.
  • Investigate damp patches on adjoining walls or ceilings below quickly.

Cementitious kit vs liquid acrylic and sheet membranes

FactorFlexible cementitious kitLiquid acrylic/polyurethaneSheet membrane
Ease of useEasy, brush or rollerEasy, ready to useNeeds skill at laps
Bond to tile adhesiveExcellentGood with right adhesiveGood with system adhesive
Cure speedModerateVariesImmediate
Thickness controlGood with two coatsDepends on applicatorFactory consistent
CostLow to midLow to midMid to high

For most UAE bathroom renovations, a flexible cementitious membrane applied with proper detailing is a reliable, cost-effective choice. Sheet membranes suit fast-track projects where consistent thickness is critical.

Price guidance and what affects it

ItemIndicative 2026 range (AED, excl. VAT)
Waterproofing kit (this product)450 per kit
Professional application, one bathroom600 – 1,500
Tile removal and disposal, typical bathroom800 – 2,000
Flood testingIncluded in most application quotes
Full bathroom renovation incl. waterproofingTypically 15,000 – 45,000 depending on finishes
  • Area and complexity: niches, benches and multiple pipes need more detailing.
  • Condition of the substrate and need to correct floor falls.
  • Access and working hours in towers.
  • 5% VAT on the invoice.

Warranty notes

The membrane carries the manufacturer's product warranty when used per the instructions and on approved substrates. When FIXORA Decor applies the system, workmanship is covered under the quotation terms and is supported by a recorded flood test. Leaks from plumbing pipes, failed silicone, cracked grout, blocked drains, or structural cracks are not membrane failures and are excluded. Product-only purchases rely on correct application by the buyer's installer.

Key takeaways

  • Tiles and grout are not waterproof; a continuous membrane is essential under shower tiles.
  • Detailing at corners, pipes and drains matters as much as the membrane itself.
  • Always flood test before tiling.
  • The kit costs AED 450; professional application per bathroom is typically AED 600–1,500 before VAT.

Frequently asked questions

How do I know if my shower needs re-waterproofing?

Signs include damp or stained ceilings in the room below, swelling skirting or door frames near the bathroom, mould behind silicone, and loose or hollow tiles in the shower. A leak detection visit can confirm the source before you retile.

Can I waterproof over existing tiles?

Some systems are designed for over-tile application, but for a leaking shower, removing tiles to the base is the reliable fix because you can see and repair the cause.

How long does waterproofing take?

Application and curing typically take one to two days, followed by a 24–48 hour flood test, so allow about three to four days before tiling.

Do the walls need waterproofing too?

Yes, inside the shower area the walls should be waterproofed to at least above the shower head height, with a turn-up on the remaining walls of the bathroom.

Can I apply the kit myself?

Competent DIYers can, by following the instructions closely, but most building managements expect a contractor for wet-area works, and professional application includes a workmanship warranty.

Dealing with a leak or planning a new bathroom? FIXORA Decor supplies the kit and offers leak detection, waterproofing and full bathroom renovations in Dubai. WhatsApp +971501962136 or request a quotation.

Mga madalas itanong

Signs include damp or stained ceilings in the room below, swelling skirting or door frames near the bathroom, mould behind silicone, and loose or hollow tiles in the shower. A leak detection visit can confirm the source before you retile.

Some systems are designed for over-tile application, but for a leaking shower, removing tiles to the base is the reliable fix because you can see and repair the cause.

Application and curing typically take one to two days, followed by a 24–48 hour flood test, so allow about three to four days before tiling.

Yes, inside the shower area the walls should be waterproofed to at least above the shower head height, with a turn-up on the remaining walls of the bathroom.

Competent DIYers can, by following the instructions closely, but most building managements expect a contractor for wet-area works, and professional application includes a workmanship warranty. Dealing with a leak or planning a new bathroom? FIXORA Decor supplies the kit and offers leak detection, waterproofing and full bathroom renovations in Dubai. WhatsApp +971501962136 or request a quotation .

Mga review ng customer

Wala pang review. Ikaw na ang maunang magbahagi ng karanasan mo.

Sumulat ng review

    Mga tanong at sagot

    Wala pang tanong. Ikaw na ang unang magtanong.

    Baka magustuhan mo rin

    Naglilingkod sa