Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Choosing Curtains and Blinds for Dubai Sun: Heat, Glare and Privacy

Which curtains and blinds work best in Dubai's strong sun: blackout and thermal linings, sheers, sunscreen blinds and openness factor, motorised systems, and what suits each room.

Updated 13 Oct 20266 min read
Choosing Curtains and Blinds for Dubai Sun: Heat, Glare and Privacy
In this article

Quick answer

Which curtains and blinds work best in Dubai's strong sun: blackout and thermal linings, sheers, sunscreen blinds and openness factor, motorised systems, and what suits each room. The best window treatments for Dubai sun combine a sheer or sunscreen layer for daytime glare control with a blackout or thermal-lined layer for heat, privacy and sleep.

Key facts

  • 1% openness: maximum glare and heat control, limited view; good for west-facing glass and home offices.
  • 3% openness: the most common balance between view and protection.
  • 5% openness: more view and daylight, less protection; suits north-facing rooms.

Last updated:

The best window treatments for Dubai sun combine a sheer or sunscreen layer for daytime glare control with a blackout or thermal-lined layer for heat, privacy and sleep. In bedrooms, blackout is essential; in living rooms, sheers or sunscreen roller blinds with a low openness factor keep the view while cutting glare and UV. For large windows and high ceilings, motorised tracks make daily use easy and protect fabrics from constant handling. Choosing the right combination for each room makes a measurable difference to comfort and cooling load.

How the sun affects your rooms

Dubai's sun is intense for most of the year. Through large glazed walls it brings three problems:

  • Heat gain: sunlight passing through glass heats floors, furniture and air, increasing the load on your AC.
  • Glare: bright light on screens, polished floors and white walls makes rooms uncomfortable.
  • UV fading: timber floors, rugs, upholstery and artwork fade over time, especially near west- and south-facing glass.

West-facing rooms take the strongest afternoon sun and need the most effective protection. North-facing rooms get softer light and can often use lighter treatments.

Blackout and thermal curtains

Blackout fabrics block nearly all light and are the standard choice for bedrooms.

  • Coated blackout: a fabric backed with an opaque coating. Effective and affordable, but the coating can crack over years of sun exposure.
  • Triple-weave blackout: a dense woven fabric with a black core yarn. Softer drape and longer life.
  • Separate blackout lining: a lining sewn or hooked behind a decorative fabric, giving you free choice of face fabric.
  • Thermal lining: an insulating layer that reduces heat transfer; useful on sun-facing glass and in rooms with high cooling demand.

Light leaks around the edges reduce blackout performance. Use ceiling-mounted tracks, extend the track 15–20 cm beyond each side of the window and let curtains touch the floor. For full blackout in bedrooms, a roller blind inside a recess combined with curtains is the most effective solution.

Sheers and sunscreen blinds

Sheer curtains soften light, add privacy during the day and make rooms feel finished. Linen-look polyester sheers resist creasing and fading better than natural linen in strong sun.

Sunscreen roller blinds and openness factor

Sunscreen fabrics are woven to block a proportion of sunlight while keeping the view. Their openness factor describes the percentage of open weave.

  • 1% openness: maximum glare and heat control, limited view; good for west-facing glass and home offices.
  • 3% openness: the most common balance between view and protection.
  • 5% openness: more view and daylight, less protection; suits north-facing rooms.

Darker sunscreen fabrics give a clearer outward view and less glare; lighter fabrics reflect more heat but glow when the sun hits them. A dark interior face with a light or metallised outer face combines the benefits.

Other blind types

  • Roman blinds: soft fabric folds; elegant in bedrooms and smaller windows, with blackout lining available.
  • Venetian blinds: aluminum or faux-wood slats give precise light control; suit kitchens and bathrooms where fabric is impractical.
  • Honeycomb (cellular) blinds: the cell structure traps air and improves insulation; a good choice for sun-facing bedrooms.
  • Vertical blinds: practical for wide sliding doors and offices, though less popular in homes.
  • Day-and-night (zebra) blinds: alternating sheer and solid bands that adjust light without lifting the blind.

Motorised curtains and blinds

Motorisation is increasingly standard in villas and high-end apartments, particularly for tall windows and wide spans.

  • Wired motors: the most reliable option; plan a power point near the track during renovation.
  • Battery motors: suitable for retrofits where wiring is difficult; recharge every few months depending on use.
  • Smart control: app, voice, keypad or timer scenes, such as closing west-facing curtains automatically at 2 pm in summer.
  • Ceiling recesses: concealing tracks in a gypsum pocket gives the cleanest look; this is easiest to build during a fit-out.

What works in each room

RoomRecommended combinationTypical cost per window (AED)
BedroomBlackout curtain plus sheer, or blackout roller plus curtainTypically 1,200–3,000
Living room (large glazing)Sheer plus blackout or thermal-lined curtain on a double trackTypically 2,000–6,000
Home officeSunscreen roller blind at 1–3% opennessTypically 600–1,500
Kitchen and bathroomAluminum venetian or moisture-resistant rollerTypically 400–1,200
Children's roomCordless blackout blind plus curtainTypically 1,000–2,500
Motorisation add-onWired or battery motor per trackTypically 1,200–2,500

Figures are typical ranges for standard windows, exclusive of 5% VAT; floor-to-ceiling glazing and premium fabrics cost more. In homes with young children, choose cordless or motorised blinds; our guide to kids' room design explains why.

Color and fabric choices

Window treatments affect how wall colors read. Warm white sheers soften strong light, while gray sheers can make a room feel cooler and slightly dimmer. Our guide to color palettes that work in Dubai light explains how to coordinate them. Choose solution-dyed or UV-stabilized fabrics for sun-facing windows, and avoid silk, which degrades quickly in direct sun.

Measuring, installation and care

Even the best fabric performs poorly if it is measured or installed incorrectly. These practical points make the difference.

Measuring

  • Curtain width: allow fabric of roughly two to two-and-a-half times the track length for a full, even fold.
  • Curtain drop: measure from the track to the floor at several points, since floors and ceilings are rarely perfectly level, and finish 1 cm above the floor or with a slight break.
  • Recessed blinds: measure the recess width at the top, middle and bottom and use the smallest figure.
  • Face-fixed blinds: overlap the window frame by at least 5–10 cm on each side to reduce light gaps.

Professional measuring is included in most supply-and-install quotations and avoids costly remakes.

Installation

Ceiling-mounted tracks need fixing into solid structure or timber battens behind gypsum, not into plasterboard alone. In towers, drilling into concrete soffits may require building management approval, and fixings near façade glazing should avoid the window frame. Concealed recesses for tracks and motors are best built during a fit-out when ceilings are already being worked on.

Care and maintenance

  • Vacuum curtains and blinds monthly with a soft brush attachment; Dubai dust builds up quickly.
  • Have curtains professionally cleaned every one to two years, following the fabric label.
  • Wipe sunscreen blinds with a damp cloth and mild detergent; avoid soaking.
  • Check motor batteries and track runners annually and lubricate tracks if they become stiff.

Rental properties

Landlords furnishing units for letting often choose durable, neutral sunscreen rollers and simple blackout curtains in bedrooms. They are easy to clean between tenants and suit most furniture styles.

Layering for year-round comfort

The most comfortable rooms in Dubai use two layers that are operated independently. In winter, from roughly November to March, open the heavy layer and keep sheers drawn to enjoy softer daylight. From May to October, close sun-facing curtains or blinds during the hottest hours, especially on west-facing glass in the afternoon, and open them again after sunset. A double track, or a blind behind a curtain, makes this daily routine easy, and motorised timers can automate it entirely.

Common mistakes

  • Tracks that stop at the window edge. Curtains then cover the glass when open and leak light when closed.
  • Coated blackout on west-facing glass. Coatings can crack; triple-weave or separate linings last longer.
  • Ignoring building rules. Some towers specify the color of treatments visible from outside; check before ordering.
  • Curtains too short. Puddled or floor-touching curtains look better and block more light.
  • Corded blinds in children's rooms. Choose cordless or motorised systems.

Next step

FIXORA Decor measures, supplies and installs curtains, blinds and motorised systems, and can build ceiling recesses for concealed tracks during a fit-out. Bring your floor plan and window orientation, and FIXORA Decor will recommend a combination for each room. Explore our interior design service or request a free quotation.

The information in this article is general guidance, not advice for your specific project. See our Terms.

Frequently asked questions

Yes, they help. Closed thermal-lined curtains or sunscreen blinds on sun-facing glass reduce heat entering the room, so the AC runs less hard. The effect is strongest on west-facing windows during summer afternoons.
3% is the most popular all-round choice. Choose 1% for strong west sun or rooms with screens, and 5% for north-facing rooms where you want more daylight and view. Darker fabrics give the clearest view outwards.
Modern battery motors are reliable for typical daily use and suit retrofits where wiring is difficult. They need recharging every few months. For heavy curtains, very wide tracks or frequent automated scenes, wired motors are a better choice.
Some towers and communities require treatments visible from outside to be white, off-white or a specified color for a uniform façade. Check your building rules or with building management before ordering.

Was this article helpful?

Get new articles by email

Practical tips now and then. Confirm by email, unsubscribe any time.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving