Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Workmanship Warranty & Maintenance Terms

Our 12-month workmanship warranty on fit-out and renovation works, manufacturer warranties on supplied products, and the terms of our annual maintenance contracts.

On this page

Last updated: 2026-10-13

This page sets out the warranty FIXORA Decor gives on its fit-out, renovation, joinery, flooring, painting and installation works, how manufacturer warranties on supplied products work, and the standard terms of our annual maintenance contracts (AMCs). The quotation or contract for your project may contain additional or different terms, which take priority. These terms do not affect your rights under Federal Law No. 15 of 2020 on Consumer Protection.

1. Workmanship warranty

1.1 What is covered

  1. We warrant that our works will be free from defects caused by faulty workmanship for 12 months from the date of handover (the "warranty period"), unless the contract states a different period.
  2. During the warranty period we will inspect any defect you report and, where it is caused by our workmanship, repair or redo the affected work at no cost to you.
  3. Typical examples include cracking or hollow-sounding tiles caused by poor bedding, joinery doors that drop out of alignment, paint that peels because of inadequate preparation, leaks from plumbing joints we installed and loose electrical connections in circuits we installed.

1.2 What is not covered

  • Fair wear and tear, including scuffs, scratches and normal fading.
  • Damage caused by misuse, accidents, impact, pets, or failure to follow care and maintenance instructions.
  • Hairline cracks in plaster, paint and grout caused by normal settlement, thermal movement or humidity changes, which are common in new or renovated spaces in the UAE climate.
  • Damage caused by water leaks, condensation, air-conditioning faults or building services outside our scope of work, including leaks from neighboring units or the building.
  • Structural movement or defects in the existing building fabric.
  • Work that has been altered, repaired or interfered with by anyone other than us.
  • Materials or items supplied by the client, and their installation where the defect is in the material itself.
  • Natural variation in stone, timber and other natural materials.
  • Consumable items such as light bulbs, filters, batteries, seals and silicone sealant, which need periodic replacement.

1.3 What may void the warranty

  • Unpaid contract balances, until they are settled.
  • Alterations, drilling or repairs to the works by third parties without our agreement.
  • Failure to report a defect promptly, where the delay has made the damage worse.
  • Use of the space for a purpose other than that for which it was designed, for example converting a dry area into a wet area.

2. Manufacturer warranties on products

  1. Products we supply, whether through our online shop or as part of a project, carry the manufacturer's or supplier's warranty. The period and conditions vary by product and are stated on the product page, the product documentation or your quotation.
  2. Where a product we supplied and installed fails within its manufacturer warranty, we will help you make the claim and, where the manufacturer supplies a replacement, quote for or carry out the reinstallation as agreed.
  3. Manufacturer warranties usually require the product to have been installed, used and maintained according to the manufacturer's instructions, and may require proof of purchase. Please keep your invoice.
  4. Our workmanship warranty covers our installation of the product; the manufacturer warranty covers the product itself.

3. Annual maintenance contracts (AMC)

3.1 Scope

An AMC provides planned preventive maintenance and reactive call-outs for the property and systems listed in your contract, such as air-conditioning, plumbing, electrical, minor civil and joinery repairs, and painting touch-ups. The scope, number of preventive visits and any included materials are listed in the contract.

3.2 Response times

PriorityExamplesTarget response
EmergencyActive water leak, total power loss, no cooling in peak summer, blocked main drain, security risk2 to 4 hours, 24 hours a day
UrgentPartial loss of cooling, single circuit tripping, toilet not working where another is availableWithin 24 hours
StandardDripping tap, loose fittings, door adjustments, lighting replacements24 to 48 hours
PlannedPreventive maintenance visitsAs scheduled in the contract

Response time means the time for a technician to attend or for the issue to be made safe remotely, not the time to complete the repair. Targets are measured from when the request is logged with us and assume that access is available.

3.3 Inclusions

  • Labor for the visits and call-outs set out in the contract.
  • Preventive maintenance such as AC filter cleaning, drain-line flushing, checking of water heaters, pumps and electrical boards, and sealant and grout inspections.
  • A written visit report and recommendations after each preventive visit.

3.4 Exclusions

  • Spare parts and replacement equipment, unless listed as included.
  • Major repairs or replacement of compressors, motors, water heaters, pumps and similar equipment.
  • Works requiring authority permits, scaffolding, building-wide shutdowns or specialist access.
  • Faults in building central services, such as district cooling, shared water tanks and common-area systems, which are the responsibility of building management.
  • Damage caused by misuse, accidents or third parties.

3.5 Consumables and parts

Consumables such as filters, bulbs, fuses, washers and sealants are either included up to a stated allowance or charged at the rates in the contract. Parts that cost more than a threshold stated in the contract will be quoted for your approval before we fit them.

3.6 Access

You must provide access to the property at the agreed times and arrange any building permits or passes required for our technicians. Visits missed because access was not available count as completed and may be rescheduled at an extra charge.

3.7 Renewals and cancellation

  1. AMCs run for 12 months. We will send a renewal reminder at least 30 days before the end date, with any price change.
  2. Unused preventive visits do not carry over to the next contract year unless agreed.
  3. Cancellation and pro-rata refunds are covered in our Refund, Returns & Cancellation Policy.

4. How to make a warranty claim or service request

  1. Contact us by email at fixora994@gmail.com, by WhatsApp on +971501962136 or by phone on +971 50 196 2136. For emergencies, please call.
  2. Give your name, project, order or AMC reference, the address, a description of the problem, when it started and photos or a short video if possible.
  3. We will log the request, confirm the priority and arrange an inspection.
  4. If the issue is covered, we will carry out the repair at no charge. If it is not covered, we will explain why and provide a quotation for the repair before doing any chargeable work.
  5. Please take reasonable steps to limit damage, such as shutting off the water supply or isolating a circuit, while waiting for our team.

Contact

If you have a question about this page, please contact us:

  • Company: FIXORA Decor Technical Services L.L.C (trading as FIXORA Decor), trade license 98765432, TRN 1234567890
  • Address: Dragon Mart, International City, Dubai, United Arab Emirates, Dubai, United Arab Emirates
  • Email: fixora994@gmail.com
  • Phone: +971 50 196 2136
  • WhatsApp: +971501962136

Serving