Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Flooring Solutions: SPC, Vinyl, Laminate, Wood, Tiles & Epoxy

Every type of floor supplied and installed: SPC and LVT, laminate, engineered wood and parquet, tiles, epoxy and carpet tiles, with skirting to match.

Trade code C03

Starting price
AED 65.00 per sqm
Working hours
Available 24/7
Areas covered
13 areas
On this page

Quick answer

Flooring supply and installation in Dubai: porcelain, marble, engineered wood and parquet, SPC, vinyl, laminate and epoxy, with removal, levelling, skirting and thresholds. Flooring supply and installation in Dubai covers choosing the right floor for each room, removing the old finish where needed, levelling the base and fitting the new floor with skirting and thresholds.

Key facts

  • Our flooring work starts from AED 65 per square metre.
  • The table below shows typical indicative 2026 supply-and-installation ranges for Dubai, exclusive of 5% VAT.

Last updated:

One team for every kind of floor

We supply and install floors for homes, offices, shops, restaurants and clinics. The material matters, but the result depends just as much on the subfloor, the leveling and the edges. Start with the flooring calculator to work out your area, boxes and skirting.

Floor types

  • SPC click flooring. A rigid, waterproof plank that can go over existing tiles. The most popular choice for apartments and rentals.
  • LVT / vinyl planks. Softer and quieter underfoot, glued down or click. Good for bedrooms, offices and clinics.
  • Laminate. A wood-look floor at a lower cost for dry rooms. Grades AC4 and AC5 handle heavier use.
  • Engineered wood. A real timber surface on a stable base, lacquered or oiled.
  • Parquet. Herringbone and chevron patterns in engineered oak for living rooms and majlis.
  • Tiles. Porcelain and ceramic, including large formats and marble-look slabs, for wet areas and high-traffic floors.
  • Epoxy. Seamless, hard-wearing coatings for garages, warehouses, kitchens and workshops.
  • Carpet tiles. For offices and meeting rooms, easy to replace one at a time.
  • Skirting. MDF, PVC or matching wood, fitted with the floor.

Compare materials in our guide SPC vs LVT vs laminate, or see products such as SPC vinyl click flooring and engineered oak flooring in the shop.

Flooring (photo 2)

How to choose

  • Kitchens, bathrooms and entrances: SPC, LVT or tiles.
  • Over existing tiles without raising doors much: SPC.
  • The warmth of real wood: engineered wood or parquet, in rooms away from water.
  • Tight budget, dry rooms: laminate.
  • Offices: carpet tiles or LVT.
  • Garages and back-of-house: epoxy.

The process

  1. Measure and check. We measure the rooms and check the subfloor for level, cracks and moisture.
  2. Quotation. Itemized by area, preparation, skirting and trims, with VAT shown separately.
  3. Preparation. Old flooring is removed if needed, and the subfloor is leveled.
  4. Installation. Planks and tiles are laid with expansion gaps and clean cuts at doors.
  5. Finishing. Skirting, thresholds and silicone where needed, then cleaning.

Realistic timelines

Click floors are quick: a typical apartment is laid in one to three days once the subfloor is ready. Tiles take longer because of adhesive and grout curing. Epoxy needs curing time between coats and before use. Wood should acclimatize in the room before it is laid. Subfloor repairs are the most common reason a floor takes longer than planned, which is why we check first.

Flooring (photo 3)

Care

  • SPC, LVT and laminate: sweep or vacuum, then a well-wrung mop. No steam cleaners on laminate.
  • Engineered wood and parquet: a barely damp mop and the cleaner recommended for the finish. Felt pads under furniture.
  • Tiles: neutral cleaner. Reseal natural stone and grout when it starts to absorb water.
  • Epoxy: mild detergent. Avoid dragging sharp metal across it.

New floors are often laid together with a TV wall, wall panels or a full fit-out, in the right order so nothing gets damaged.

What's included

  • Site check of the subfloor, levels and moisture
  • SPC, LVT, laminate, engineered wood, parquet, tiles, epoxy, carpet tiles
  • Underlay, leveling and thresholds
  • Matching skirting and door trims
  • Furniture moved and put back by arrangement
  • Spare material left for future repairs

Frequently asked questions

Yes, in most cases, as long as the tiles are firm and reasonably level. Deep grout lines and hollow tiles are dealt with first.

SPC is waterproof and stable under air conditioning, so it suits most rooms including kitchens. Laminate is fine in dry rooms and costs less, but standing water damages it.

Usually 5 to 7 percent for a straight lay and 10 to 15 percent for herringbone or diagonal. The flooring calculator on this website adds it for you.

Small items, yes. Large furniture can be moved room by room by our team if agreed in the quotation.

Yes, after checking the material and the quantity. The workmanship warranty then covers the installation, not the product.

Why choose FIXORA Decor for Flooring Solutions: SPC, Vinyl, Laminate, Wood, Tiles & Epoxy?

Vetted experts
Trained, background-checked technicians.
Upfront pricing
Itemized quotes with VAT shown — no surprises.
Agreed schedule
A dated work program agreed before we start.
Guaranteed work
Workmanship guarantee on every job.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving