In this article
Quick answer
A preventive maintenance plan keeps a Dubai office comfortable, compliant and running. A preventive maintenance plan for a Dubai office should cover AC and ventilation, electrical systems, plumbing, fire and life safety equipment, doors and access control, finishes and furniture, with tasks scheduled monthly, quarterly and annually.
Last updated:
A preventive maintenance plan for a Dubai office should cover AC and ventilation, electrical systems, plumbing, fire and life safety equipment, doors and access control, finishes and furniture, with tasks scheduled monthly, quarterly and annually. Fire safety equipment must be maintained by a Civil Defence approved contractor, and every task should be recorded. A clear checklist reduces breakdowns, protects staff and makes building management inspections, lease renewals and insurance claims far simpler.
Who is responsible for what in a Dubai office
In most Dubai office buildings, responsibilities are split. The landlord or building management maintains the base building: central chillers or district cooling plant, risers, lifts, the building fire alarm and sprinkler mains, common areas and the facade. The tenant maintains everything within the leased space that it installed or controls: fan coil units and thermostats, small power and lighting, the fire alarm devices and sprinklers within the fit-out if they were altered, pantry and washroom fittings, doors, access control, IT rooms and furniture.
Read your lease and the building's fit-out manual to confirm the split. Free zone buildings, such as those under DDA in Dubai Media City and Dubai Internet City, or Dubai Silicon Oasis Authority, may have their own requirements.
Monthly tasks
- Clean or replace fan coil unit filters, more often in dusty areas such as Al Quoz or Jebel Ali
- Check thermostats and confirm space temperatures are within comfort range
- Visual check of fire extinguishers: in place, pressure gauge in the green, pin and seal intact, not obstructed
- Test emergency lighting by brief function test, and check exit signs are lit
- Check that escape routes, fire doors and exits are clear and doors close fully
- Inspect pantry and washroom taps, flush valves, drains and hand dryers
- Replace failed lamps and check lighting controls and sensors
- Check UPS status and server room cooling
- Walk the space for damage to ceilings, flooring, partitions and furniture
Quarterly tasks
- Service fan coil units: coil cleaning, drain pan cleaning and drain line flushing
- Check and clean supply and return grilles and diffusers
- Test RCDs and inspect distribution boards for hot spots and loose connections
- Inspect door closers, hinges, locks and access control readers
- Check water heaters, pantry boilers and water filters, and replace filter cartridges as specified
- Inspect sealants in washrooms and pantries
- Arrange pest control by a Dubai Municipality approved provider
- Review the reactive maintenance log for repeat faults
Annual tasks
- Fire extinguisher annual service and tagging by an approved contractor
- Fire alarm devices, sprinklers and emergency lighting within the tenant space, inspected and tested by a Civil Defence approved contractor, coordinated with building management
- Full emergency lighting duration test
- Thermal imaging of distribution boards under load
- Deep clean of fan coil units and, where needed, duct cleaning
- Repaint of high-traffic walls, touch-ups elsewhere
- Carpet deep cleaning and hard floor restoration
- Review of first aid supplies and signage
- Fire evacuation drill with staff
Scheduling around the working week
Most offices prefer noisy or disruptive work, such as fan coil deep cleans, board thermal imaging and painting, outside business hours or at weekends. Plan these tasks in advance with building management, as after-hours access, lift bookings and work permits usually need several days' notice. Routine monthly checks can often be done during the day with minimal disruption if technicians work zone by zone.
Seasonal adjustments
- Before summer: deep clean fan coils, check thermostats and confirm server room cooling has spare capacity
- After dust storms: check and replace filters, and inspect any outdoor units on terraces
- Before year-end closures: agree AC set points, check UPS and IT room alarms, and confirm emergency contacts
- After any refurbishment: update the asset register and confirm fire systems were reinstated and tested
Setting up the plan for the first time
If your office has never had a structured plan, start with a walk-through to list every asset, note its condition and record anything already overdue. Prioritize life safety items and anything that could stop work, such as server room cooling and main distribution boards. Then set a twelve-month calendar, assign responsibilities between your team, building management and contractors, and agree how faults will be reported. Review the plan after the first quarter, because the first few visits usually reveal tasks that need adjusting.
Smaller offices, such as a ten-person team in a business center, can keep the plan simple: a one-page schedule, a contact list and a folder of reports. The principle is the same at any scale: planned tasks, a named owner and proof that the work was done.
Fire and life safety compliance
Fire and life safety in the UAE is governed by the UAE Fire and Life Safety Code of Practice, enforced in Dubai by Dubai Civil Defence. In practical terms for an office tenant:
- Fire protection systems must be maintained by a Civil Defence approved maintenance contractor, typically through an annual contract
- Any change to fire alarm devices, sprinklers or fire-rated walls during fit-out or alteration must be designed and approved, then tested
- Escape routes, exit signs and emergency lighting must be maintained and unobstructed at all times
- Fire extinguishers must be serviced and tagged at the required intervals
- Records of inspections, tests and maintenance must be kept and made available during inspections
Building management will usually coordinate the base building systems, but tenants are responsible for keeping their own space compliant and for not blocking or altering systems without approval.
Typical costs for office maintenance
The ranges below are typical for Dubai, exclusive of 5% VAT, and depend on office size, systems and service levels.
| Item | Typical cost range | Notes |
|---|---|---|
| Office maintenance contract, up to 300 m² | AED 4,000–12,000 per year | AC, MEP and handyman tasks |
| Office maintenance contract, 300–1,000 m² | AED 10,000–30,000 per year | Scope and response times vary |
| Fire extinguisher service | AED 30–80 per extinguisher | Annual service and tagging |
| Fire alarm and life safety maintenance | AED 2,500–10,000 per year | Tenant space, approved contractor |
| Fan coil deep clean | AED 250–500 per unit | Often scheduled out of hours |
| Thermal imaging of boards | AED 600–1,500 | With written report |
Our guide to annual maintenance contracts in Dubai explains how to compare service levels and what to look for in a commercial scope.
Keeping records
Good records are what turn maintenance into evidence. Keep a maintenance log that includes:
- An asset register listing each AC unit, board, water heater, extinguisher and key piece of equipment with its location
- A planned maintenance calendar with completion dates
- Service reports, test certificates and photos
- A reactive maintenance log with fault, response time, cause and fix
- Copies of approvals, permits and NOCs for any alterations
A shared digital log means facility managers, building management and auditors see the same information. FIXORA Decor provides a visit report after every planned maintenance visit, so office managers always have up-to-date records.
Common mistakes to avoid
- Treating maintenance as reactive only. Waiting for failures means more downtime and higher costs.
- Altering fire systems during refurbishments without approval. Moving a partition can leave rooms without detection or sprinkler coverage.
- Ignoring the server room. A small cooling failure here can take the business offline.
- Blocking escape routes with storage. It is one of the most common findings during inspections.
- No single owner. Assign one person to own the plan and the records.
Next step
If your office does not have a structured maintenance plan, FIXORA Decor can survey your space, build an asset register and propose a schedule that fits your building's rules. Request a free quotation, or if you are planning changes to your space, see our turnkey fit-out service.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Sources
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



