
Beachfront restaurant refurbishment on Palm Jumeirah
An illustrative restaurant refurbishment on Palm Jumeirah: a 420 m² indoor dining room and 260 m² sea-facing terrace renewed in ten weeks during the summer low season, with a new bar, shading, corrosion-resistant finishes and a refreshed kitchen line.
Quick answer
An illustrative restaurant refurbishment on Palm Jumeirah: a 420 m² indoor dining room and 260 m² sea-facing terrace renewed in ten weeks during the summer low season, with a new bar, shading, corrosion-resistant finishes and a refreshed kitchen line. The project is presented as an illustrative example; the operator is not named.
Key facts
- Weeks 1–2: strip-out, protection of kept equipment, gas isolation and survey of hidden conditions.
Last updated:
This restaurant refurbishment on Palm Jumeirah renewed a tired beachfront dining room and terrace during the quiet summer months so the venue could reopen for the busy winter season. FIXORA Decor replaced the bar, ceilings, lighting, flooring, terrace shading and part of the kitchen line across 680 m² in ten weeks, using materials chosen to survive salt air, humidity and direct sun. The project is presented as an illustrative example; the operator is not named.
The brief: a restaurant refurbishment Palm Jumeirah guests would notice
The restaurant had traded for six years in a beachfront building on the Palm. Guests still came for the view, but reviews mentioned faded upholstery, rusty terrace furniture, a dark interior and slow service at the bar. The operator wanted a lighter Mediterranean look, a larger bar that could serve the terrace directly, better shade so the terrace could open earlier in the season, and kitchen improvements to speed up the grill and cold sections. The budget was fixed, and the restaurant could close for no more than ten weeks between early July and mid-September, when footfall on the Palm is lowest.
The operator also asked us to keep everything that still worked. The walk-in cold rooms, the extract hood over the main cooking line and the grease trap were in good condition, so the refurbishment focused on what guests see and the parts of the kitchen that slowed service.
Challenges
- Salt air and humidity. Within meters of the sea, ordinary steel, standard fixings and some paints corrode quickly. Many of the problems guests noticed were early corrosion and swelling, not wear.
- Summer working conditions. July and August bring extreme heat and humidity. Outdoor works on the terrace had to respect the UAE midday work break and be planned around early mornings and evenings to protect the team.
- Building and community rules. The building management and master developer have rules on working hours, deliveries, noise near residential units and anything that changes the external appearance, including terrace shading.
- Kitchen downtime. Any change to gas, extract or drainage needed inspection and re-commissioning before reopening, and the kitchen team needed time to train on the new line.
Approvals (in general terms)
On Palm Jumeirah, a restaurant refurbishment usually involves the building owner or management company, the master developer's community approvals for anything visible from outside, and the relevant authority permits for fit-out, fire and life safety and food establishment changes. The new terrace shading needed design approval for its form and color before structural details were submitted. Gas works were handled by an approved gas contractor with the building's gas supplier, and the changes to the kitchen line were reviewed from a food-safety perspective before reopening. FIXORA Decor coordinated the drawings and inspections, but the operator remained the license holder. Because fees and timelines change, we always recommend checking current requirements with the developer and authorities at the start of the project.
Design approach
The design team kept the strong points of the room, the sea view and high ceiling, and removed what was hiding them. Dark timber ceiling panels were replaced with a lighter slatted ceiling in powder-coated aluminum with a timber-look finish, which does not swell with humidity. Heavy drapes at the windows were replaced with sheer motorised blinds that cut glare at sunset while keeping the view. The floor became a large-format porcelain with a stone look and a textured finish near the terrace doors, where sand and water are tracked in.
The bar moved from the back wall to the line between dining room and terrace. Its back bar is visible from both sides, and a pass-through window lets terrace waiters collect drinks without walking through the dining room. The bar top is a sintered stone that resists citrus and heat, and the bar front is lined with fluted ceramic tiles in a sandy white.
On the terrace, the old fabric umbrellas were replaced with a bioclimatic pergola with adjustable aluminum louvres over the main dining area and fixed shade sails over the lounge corner. Misting fans were integrated into the pergola beams. Furniture was chosen in marine-grade aluminum and outdoor rope with quick-dry cushions.
In the kitchen, the grill section was reorganised so the chef faces the pass, a second refrigerated drawer unit was added under the grill, and the cold section received a new prep counter with an integrated refrigerated rail. The existing hood was extended to cover the reorganised line.
Scope of work
- Strip-out of ceilings, bar, flooring, wall finishes and terrace furniture
- New aluminum slatted ceiling with integrated linear diffusers and lighting
- Porcelain flooring indoors and anti-slip porcelain pavers on the terrace, with improved falls to drains
- New central bar with back bar, under-counter refrigeration, glass washer, ice machine and drainage
- Bioclimatic pergola, shade sails, misting fans and outdoor lighting
- Motorised sheer blinds on all sea-facing windows
- Kitchen line reorganisation, gas pipework alteration, hood extension and new stainless steel counters
- Repainting with anti-fungal interior paint and coastal-grade exterior coating
- Upholstery, banquettes and loose furniture supply
- Lighting control with scenes for lunch, sunset and dinner service
Materials
| Area | Material | Reason |
|---|---|---|
| Indoor ceiling | Powder-coated aluminum slats, timber-look | Will not swell or warp in humidity |
| Indoor floor | Porcelain, stone look, R10 slip rating | Hard-wearing, easy to mop |
| Terrace floor | Porcelain pavers, R11 slip rating | Safe with sand and water, cooler than dark stone |
| Bar top | Sintered stone | Resists heat, citrus acids and staining |
| Terrace structure | Marine-grade aluminum pergola, stainless fixings (A4) | Corrosion resistance near the sea |
| Outdoor furniture | Aluminum frames, outdoor rope, quick-dry foam | Light, rust-free, dries after rain or misting |
| Paint | Anti-fungal interior and coastal exterior systems | Resists mold and salt |
Program: ten weeks in the low season
We planned the ten weeks backwards from the reopening date, with a two-week buffer for inspections and training built in. The pergola, bar joinery and kitchen counters were ordered as soon as designs were approved so that fabrication overlapped with strip-out.
- Weeks 1–2: strip-out, protection of kept equipment, gas isolation and survey of hidden conditions.
- Weeks 3–4: first-fix electrical and plumbing for the new bar, terrace drainage corrections, kitchen gas alterations.
- Weeks 5–6: ceilings, flooring and wall finishes indoors; pergola foundations and structure on the terrace, worked in early morning and evening shifts.
- Weeks 7–8: bar installation, kitchen counters and hood extension, terrace pavers and lighting.
- Week 9: commissioning of gas, extract, refrigeration and lighting scenes; authority inspections.
- Week 10: furniture, snagging, deep clean, kitchen and bar team training, soft opening for staff and friends.
Noisy works such as cutting tiles and drilling into slabs were scheduled for the hours allowed by building management, and deliveries used the service entrance outside peak residential times.
Handover
The operator received as-built drawings, test certificates for electrical and gas works, the hood extension commissioning record, warranties for the pergola, blinds, refrigeration and stone, and a coastal maintenance plan. That plan covers washing aluminum and stainless steel with fresh water every few weeks, checking pergola louvre seals before the rainy days in winter, and cleaning misting nozzles. Spare porcelain tiles and pavers from the same batch were left on site for future repairs.
Budget control during the refurbishment
Because the budget was fixed, we agreed a simple change-control routine at the start. Any change requested by the operator or caused by hidden conditions was priced in writing within two working days and approved before work went ahead. During strip-out we found that part of the terrace screed had lost its fall towards the drains, so water pooled after cleaning. Correcting it added cost, which the operator covered by choosing a simpler banquette fabric and keeping the existing host stand. A weekly cost report showed committed costs, approved changes and the remaining contingency, so there were no surprises at final account stage.
A 12-month defects period applies, and FIXORA Decor carries out a post-opening check after the first month of full service.
Results
- The restaurant reopened on the planned date at the start of the season.
- The terrace could open earlier in the season thanks to the pergola, misting fans and lighter paving.
- Terrace drinks service is faster because waiters collect from the bar's pass-through window.
- The grill section now has refrigerated storage at arm's reach, reducing trips to the cold room during service.
- The operator reports guest reviews now mention the brighter room and comfortable terrace rather than wear and tear.
Lessons learned
On the coast, material choice is the refurbishment. Many of the original problems came from standard fixings and finishes that were never meant for salt air, so we specified A4 stainless fixings and marine-grade aluminum throughout, and checked even small items like hinge pins and blind brackets. Summer refurbishments in the UAE need real planning for heat: we moved outdoor works to the cooler parts of the day and kept indoor works going through the afternoon. Finally, keeping working equipment saved a significant part of the budget, which was moved into the pergola and the bar, the two things guests notice most.
Key takeaways
- Refurbish beachfront restaurants in the summer low season and plan backwards from reopening.
- Specify marine-grade aluminum and A4 stainless fixings near the sea.
- Get external changes such as pergolas approved by the developer before fabrication.
- Keep good equipment and spend the savings on what guests see.
Planning a restaurant refurbishment in Dubai?
Indicative 2026 budgets for a refurbishment of this scope typically range from around AED 1,800 to AED 3,500 per m² plus 5% VAT, depending on kitchen works, terrace structures and finishes; we confirm costs after a survey. Speak to FIXORA Decor on WhatsApp +971501962136 or call +971 50 196 2136, or request a quote at /quote.


