In this article
Quick answer
Practical acoustic design for open-plan offices: absorption, ceilings, wall panels, meeting room sound insulation, HVAC noise and typical costs for UAE workplaces. Open-plan offices in Dubai often look impressive but sound poor: hard floors, glass partitions, exposed ceilings and concrete cores bounce speech around the room, and the result is distraction, poor call quality and little privacy.
Key facts
- Typical acoustic upgrades for an existing open-plan floor range from AED 80 to AED 350 per m² depending on the starting point and the target.
- Coverage of around 30–50% of the floor area is a common starting point.
- Fabric-wrapped or felt wall panels on large blank walls, typically AED 250–550 per m².
Last updated:
Open-plan offices in Dubai often look impressive but sound poor: hard floors, glass partitions, exposed ceilings and concrete cores bounce speech around the room, and the result is distraction, poor call quality and little privacy. Good acoustic design fixes this with three tools: absorption to reduce reverberation, blocking to keep sound from traveling between spaces, and masking to make distant speech less intelligible. It does not need to be expensive if it is planned early. Typical acoustic upgrades for an existing open-plan floor range from AED 80 to AED 350 per m² depending on the starting point and the target.
Why open-plan offices get noisy
Most noise complaints come from speech, not machines. Colleagues on calls, informal meetings at desks and pantry chatter all carry. Several common design choices make it worse:
- Exposed concrete soffits with no absorptive ceiling.
- Hard floors such as polished concrete, porcelain or timber across work areas.
- Full-height glass to meeting rooms, often with weak seals.
- Low desk screens or none at all, and long uninterrupted desk rows.
- Collaboration zones placed next to focus areas.
The measure acousticians use most is reverberation time, the time sound takes to decay. Shorter reverberation makes a room feel calmer and speech clearer at short range.
Absorption: the ceiling does most of the work
The ceiling is the largest uninterrupted surface in an office, so it gives the best return. Options include:
- Acoustic ceiling tiles: mineral fiber or glass wool tiles with a high absorption class (look for Class A or a high NRC rating). The most cost-effective solution where a suspended ceiling is acceptable.
- Rafts and baffles: suspended panels under exposed ceilings, keeping the industrial look while adding absorption. Coverage of around 30–50% of the floor area is a common starting point.
- Spray-applied acoustic finishes: applied to concrete soffits where a clean, monolithic look is wanted.
Typical installed costs range from AED 90–180 per m² for acoustic tile ceilings and AED 250–600 per m² of panel for rafts and baffles, depending on material and fixing.
Walls, floors and furniture
Once the ceiling is addressed, add absorption at head height where speech travels:
- Fabric-wrapped or felt wall panels on large blank walls, typically AED 250–550 per m².
- Acoustic pinboards and whiteboards that double as useful surfaces.
- Desk screens of adequate height between facing desks.
- Soft seating, curtains and bookshelves in collaboration areas.
- Carpet tiles in work zones, which reduce footfall noise and add absorption. If you prefer hard floors, use an acoustic underlay and add more absorption elsewhere.
Meeting rooms and private offices: blocking sound
Meeting rooms need sound insulation, which is different from absorption. Sound travels through the weakest point, so the whole construction must be detailed:
- Partitions: double-layer plasterboard on both sides of a stud frame with mineral wool infill, taken from slab to slab, not stopping at the ceiling.
- Ceiling voids: where partitions stop at the ceiling, install acoustic barriers in the void above, otherwise sound passes over the wall.
- Glazing: laminated acoustic glass, double-glazed partitions for sensitive rooms, and proper seals at mullions and junctions.
- Doors: solid-core doors with perimeter seals and drop-down seals at the threshold.
- Services: acoustic treatment on ducts passing between rooms (cross-talk attenuators), and sealed penetrations for cables and pipes.
Inside meeting rooms, add absorption too, because video calls suffer in echoey rooms even when the walls block sound well.
Typical performance targets
| Space | Typical approach | Indicative cost |
|---|---|---|
| Open-plan work area | Class A ceiling or rafts, carpet tiles, screens | AED 80–250 per m² of floor |
| Standard meeting room | Insulated partition to slab, acoustic glass, sealed door | AED 15,000–35,000 per room upgrade |
| Confidential room or boardroom | Double-layer partitions, double glazing, attenuated ducts | AED 30,000–70,000 per room upgrade |
| Phone booth | Free-standing acoustic booth | AED 12,000–35,000 each |
Ranges are typical, exclusive of 5% VAT, and depend on room size and existing construction.
HVAC noise in UAE offices
Air conditioning runs almost all year in the UAE, so it is a constant part of the acoustic environment. Problems include noisy fan coil units above meeting rooms, high air velocities at diffusers, and rattling ductwork. Good practice includes selecting units with low noise ratings, placing fan coil units over corridors rather than quiet rooms, using flexible connections and lined ducts, and balancing the system after installation. A moderate, steady background sound from HVAC can actually help by masking distant speech, but whistles, hums and rattles are distracting.
Sound masking
In very quiet, well-insulated offices, speech carries further because there is no background sound. Electronic sound masking adds a low, even background noise through ceiling speakers, improving speech privacy. It works best combined with absorption, not instead of it.
Upgrading an existing office
Start with an assessment
If the office is already occupied and people are complaining, start with a short assessment before buying panels. Walk the floor at busy times and note where noise comes from: phone calls, meeting rooms, the pantry, equipment or the air conditioning. Simple measurements of reverberation and background noise, combined with a staff survey, show whether the problem is too much reflection, poor separation between rooms, or simply the wrong activities placed side by side. Sometimes the most effective fix is moving a team, relocating a printer or turning a noisy collaboration area into a quiet zone, rather than adding material.
Quick wins
- Replace damaged or low-performance ceiling tiles in the noisiest zones first.
- Add perimeter seals and drop seals to meeting room doors.
- Fill ceiling voids above meeting room partitions with acoustic barriers.
- Introduce phone booths so calls leave the desk area.
- Agree simple etiquette for calls and impromptu meetings in open areas.
Acoustics and design aesthetics
Acoustic materials no longer mean gray ceiling tiles everywhere. Felt baffles in brand colors, timber slat panels with absorptive backing, printed fabric panels, acoustic plaster and planted walls can all contribute absorption while forming part of the interior design. The key is to specify performance alongside appearance: ask for tested absorption data, check fire ratings, and make sure the material is cleanable and durable enough for an office. Interior designers and acoustic advisers should agree targets early, so design-led choices are not replaced later by cheaper, less effective products.
Working with the base building
In Dubai towers, the landlord's Category A specification often includes a standard ceiling grid and fan coil units. Before replacing anything, check what the base building provides and what the lease allows, because ceilings and AC equipment may have to be reinstated at the end of the term. Acoustic tiles that fit the existing grid are usually the simplest upgrade, and building management approval is normally needed for any work above the ceiling, especially near sprinklers and smoke detectors.
Common mistakes
- Specifying decorative ceilings with no acoustic performance.
- Building meeting room walls only to ceiling height with an open void above.
- Using standard glass and leaving gaps at mullions and door frames.
- Placing the pantry or collaboration zone next to focus areas.
- Ignoring HVAC noise until after the fit-out is complete.
Acoustics matter even more in shared workspaces; our guide to co-working space design and fit-out covers zoning that reduces noise problems. FIXORA Decor includes acoustic details in partition, ceiling and MEP drawings from the start, which costs far less than retrofitting after complaints. Where an office is already occupied, FIXORA Decor can phase upgrades zone by zone over weekends.
Next step
If your team is struggling with noise, send us your floor plan and the main issues, and we will propose targeted improvements. Request a free quotation or see our interior design service for workplace planning.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



