Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Kitchen Renovation Cost in Dubai: Cabinets, Worktops and Budgets

What a kitchen renovation in Dubai typically costs, from a cabinet refresh to a full villa kitchen, with prices per linear meter for cabinetry and worktops and the MEP and tiling costs people forget.

Updated 13 Oct 20266 min read
Kitchen Renovation Cost in Dubai: Cabinets, Worktops and Budgets
In this article

Quick answer

What a kitchen renovation in Dubai typically costs, from a cabinet refresh to a full villa kitchen, with prices per linear metre for cabinetry and worktops and the MEP and tiling costs people forget. These ranges exclude appliances and 5% VAT.

Key facts

  • These ranges exclude appliances and 5% VAT.
  • Cabinets typically account for 40–55% of a kitchen budget.
  • Melamine or membrane-faced MDF: typically AED 1,800–3,000 per linear metre.
  • High-gloss acrylic or lacquered MDF: AED 3,000–5,000 per linear metre.
  • Real wood veneer or solid timber frames: AED 4,500–8,000 per linear metre.
  • Tall units (fridge housing, oven towers, pantry): AED 2,500–7,000 each depending on finish and internal fittings.

Last updated:

A kitchen renovation in Dubai typically costs AED 12,000–25,000 for a refresh of an apartment kitchen (new doors, worktop and fittings), AED 25,000–60,000 for a full apartment kitchen replacement and AED 60,000–180,000 or more for a villa kitchen with an island, premium cabinetry and stone worktops. These ranges exclude appliances and 5% VAT. The biggest variables are the cabinetry grade, the worktop material, and how much plumbing and electrical work the new layout needs.

Below, we break a kitchen budget into its parts so you can see where the money goes and where you can save without compromising on durability.

Typical kitchen renovation budgets

ScopeTypical range (AED, excl. VAT)What is usually included
Refresh: replace doors, handles, worktop12,000–25,000Existing carcasses kept, new sink and mixer, minor electrical
Full apartment kitchen, same layout25,000–60,000New cabinetry, worktop, backsplash, sink, lighting, tiling repairs
Apartment kitchen, opened up to living area45,000–90,000Partition removal with approval, relocated services, new ceiling
Villa kitchen, mid-range60,000–120,000Island, tall units, quartz worktop, new floor and lighting
Villa kitchen, premium120,000–180,000+Lacquer or veneer cabinetry, sintered stone, pantry, full MEP upgrade

Cabinetry and worktops: the largest line items

Cabinetry

Cabinets typically account for 40–55% of a kitchen budget. Contractors in Dubai usually price cabinetry per linear meter of base and wall units together, with tall units priced separately.

  • Melamine or membrane-faced MDF: typically AED 1,800–3,000 per linear meter. Durable, easy to clean, wide range of colors and woodgrain effects.
  • High-gloss acrylic or lacquered MDF: AED 3,000–5,000 per linear meter. Seamless finish, more vulnerable to chipping at edges.
  • Real wood veneer or solid timber frames: AED 4,500–8,000 per linear meter. Warm and premium, needs stable humidity.
  • Tall units (fridge housing, oven towers, pantry): AED 2,500–7,000 each depending on finish and internal fittings.

Carcass material matters as much as the doors. In the UAE, moisture-resistant board (often specified as MR grade) for sink and dishwasher units is a sensible minimum, as small leaks are common and standard chipboard swells quickly. Soft-close hinges and full-extension drawer runners should be standard at every price level.

Worktops

The worktop is the second largest item and the one that takes the most daily wear. Typical supply-and-fit prices are:

  • High-pressure laminate: typically AED 350–700 per linear meter. The budget option; not heat resistant.
  • Granite: AED 900–2,000 per m². Hard wearing, needs periodic sealing.
  • Engineered quartz: AED 1,200–2,500 per m². Non-porous and the popular all-rounder.
  • Sintered stone or porcelain slab: AED 1,800–3,500 per m². Heat and UV resistant, available in thin profiles.
  • Natural marble: AED 1,500–4,000 or more per m². Beautiful, but stains and etches easily.

Cut-outs for the sink and hob, edge profiles, upstands and waterfall ends on islands are usually charged separately, typically AED 150–600 per cut-out or detail.

Appliances are usually excluded

Most kitchen quotations in Dubai exclude appliances unless you ask for them. That is sensible, because appliance budgets vary enormously. As a rough planning figure, a basic built-in set (oven, hob, hood, dishwasher) might cost AED 6,000–12,000, while a premium set with an integrated fridge, wine cooler and steam oven can exceed AED 40,000. What should be included is the installation: housing units sized to the appliance specifications, dedicated electrical circuits, water and drain connections, and ducting or recirculation for the hood. Always give your contractor the appliance model dimensions before cabinetry is manufactured.

MEP: plumbing, electrical and ventilation

Mechanical, electrical and plumbing work is where kitchen budgets most often grow. Typical items include:

  • Relocating a sink or adding an island sink: AED 1,500–5,000 depending on drain falls and floor build-up.
  • New dedicated circuits for oven, hob and dishwasher: AED 400–1,000 each, carried out by a DEWA-approved electrical contractor with appropriately rated cabling.
  • Additional sockets, under-cabinet LED lighting and dimmers: AED 2,000–6,000 for a typical kitchen.
  • Extract hood ducting to an external wall or approved shaft: AED 800–3,000. In many towers, hood ducts cannot be connected to the building exhaust, so a recirculating hood is required.
  • Gas connections: only in buildings with a central gas system, and only by approved specialists. Many apartments use induction only.

Opening a kitchen to the living area or moving wet points generally needs approval from building management or the community developer, and in villas may involve a Dubai Municipality or free zone authority permit depending on the scope. Fees apply and timelines vary.

Tiling, flooring and finishes

Backsplashes typically cost AED 150–450 per m² supplied and fitted for porcelain or ceramic tiles, and more for stone slabs or patterned mosaics. Replacing the kitchen floor at the same time is usually efficient: porcelain is typically AED 120–300 per m² supplied and fitted. If the floor continues into the living area, our flooring cost guide compares the options. A new gypsum ceiling with recessed downlights over a kitchen adds AED 2,500–7,000 for a typical apartment kitchen.

Where to save and where not to

Kitchens are used hard every day, so some savings come back to haunt you while others make little difference to the result. As a general guide:

Worth spending on

  • Hardware: hinges, drawer runners and lift mechanisms are opened thousands of times a year. Good hardware adds AED 1,500–4,000 to a typical kitchen and is the difference between doors that stay aligned and doors that sag.
  • Worktop: it takes the most abuse and is expensive to replace later because it involves templating, cutting and reconnecting the sink and hob.
  • Moisture protection: MR-grade carcasses, sealed edges and an aluminum sink base protector are cheap insurance against leaks.
  • Lighting and sockets: adding circuits once the backsplash is tiled is disruptive and costly.

Where you can save

  • Door finish: a quality membrane or laminate door looks very similar to lacquer from a few steps away and is more chip resistant.
  • Backsplash: a simple porcelain tile can look as good as a stone slab at a fraction of the price.
  • Layout: keeping the sink and hob in their current positions avoids most of the plumbing and ventilation costs.
  • Internal accessories: corner carousels and pull-out larders are useful, but each adds AED 800–3,000. Choose the ones you will use.

How long a kitchen renovation takes

  • Design, measurement and approvals: one to three weeks.
  • Cabinet manufacturing after design sign-off: three to six weeks.
  • Strip-out, MEP and tiling on site: one to two weeks.
  • Cabinet installation, worktop template and fitting: one to two weeks, since stone worktops are templated after the base units are installed.

Expect four to ten weeks from design approval to a working kitchen, depending on materials and approvals.

Common mistakes

  • Comparing prices without matching specifications: one quotation may include MR-grade carcasses and full-extension runners; another may not. See our guide on how to compare three renovation quotations.
  • Ordering appliances late: housing dimensions must be fixed before manufacture.
  • Underestimating lighting: a single ceiling light leaves worktops in shadow. Plan task lighting under the wall units.
  • Forgetting ventilation: poor extraction in a sealed, air-conditioned apartment leads to grease on ceilings and odors throughout the home.
  • No contingency: hidden pipe corrosion or uneven walls are common in older buildings. Keep 10% of the budget in reserve.

FIXORA Decor designs and builds kitchens with in-house joinery, so cabinetry, worktops and MEP are coordinated by one team. That avoids the gaps that open up when the cabinet maker, plumber and electrician each assume someone else is responsible.

Next step

Share a floor plan, photos of your current kitchen and your appliance list, and we will prepare a free quotation with a clear breakdown by cabinetry, worktops, MEP and finishes. You can also see how FIXORA Decor designs and builds bespoke cabinetry on our joinery and carpentry page.

The information in this article is general guidance, not advice for your specific project. See our Terms.

Frequently asked questions

For a compact apartment kitchen with the same layout, a full replacement typically costs AED 25,000–45,000 before VAT and appliances. A refresh that keeps the existing carcasses and replaces doors, worktop and sink can come in at AED 12,000–25,000.
Usually not. Most contractors quote cabinetry, worktops, MEP and finishes, and leave appliances to the client so you can choose freely. The quotation should still include installation, power and water connections, and housing units built to your appliance dimensions.
Replacing cabinets and worktops in the same position usually needs only a building management work permit. Moving plumbing, removing partitions or changing ventilation generally needs a formal approval from the building or developer, and sometimes from the relevant authority.
Engineered quartz is a popular choice because it is non-porous, resists stains and needs no sealing. Sintered stone costs more but handles hot pans and sunlight better. Laminate is the budget option but marks easily with heat.

Sources

Was this article helpful?

Get new articles by email

Practical tips now and then. Confirm by email, unsubscribe any time.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving