In this article
Quick answer
Typical supply-only and supply-and-fit prices per square metre for SPC, laminate, engineered wood, porcelain and marble flooring in Dubai, plus the hidden costs of removal, levelling and skirting. The difference between a modest and a premium quotation usually comes from the product grade, the condition of the existing floor and whether the old finish has to be removed first.
Key facts
- Ask for the waste factor in writing: typically 5–8% for click flooring laid straight, 10–15% for herringbone patterns or large tiles with many cuts.
- Taking up old ceramic tiles and adhesive bed typically costs AED 25–50 per m², including debris disposal.
- Removing old carpet or click flooring is cheaper, usually AED 8–20 per m².
- If the old tiles are uneven or the screed is damaged, a self-levelling compound is applied, typically AED 25–60 per m² depending on thickness.
- MDF or PVC skirting: typically AED 20–45 per linear metre fitted.
- Tile skirting cut from the floor tile: AED 25–60 per linear metre.
Last updated:
In Dubai, new flooring typically costs AED 70–140 per m² for SPC (rigid vinyl), AED 60–130 per m² for laminate, AED 180–450 per m² for engineered wood, AED 120–300 per m² for porcelain tiles and AED 350–1,200 per m² or more for natural marble, supplied and fitted, exclusive of 5% VAT. The difference between a modest and a premium quotation usually comes from the product grade, the condition of the existing floor and whether the old finish has to be removed first.
This guide compares the main flooring types, separates supply-only from supply-and-fit pricing, and lists the extras that often appear on a final invoice.
Typical flooring prices per m² in Dubai
| Flooring type | Supply only (AED/m²) | Supply and fit (AED/m²) | Best suited to |
|---|---|---|---|
| SPC rigid vinyl click, 4–6 mm | 45–100 | 70–140 | Apartments, rentals, overlaying old tiles |
| Laminate, AC4–AC5, 8–12 mm | 35–90 | 60–130 | Bedrooms, offices, dry areas |
| Engineered wood, 14–20 mm | 140–380 | 180–450 | Living areas, villas, premium apartments |
| Porcelain tile, 60x60 to 60x120 cm | 45–180 | 120–300 | Kitchens, bathrooms, villas, high traffic |
| Large-format porcelain slab, 120x240 cm and up | 180–450 | 320–650 | Feature floors, minimal grout lines |
| Natural marble | 220–900+ | 350–1,200+ | Entrance halls, villas, luxury interiors |
| Epoxy or polyurethane resin | n/a | 90–250 | Garages, clinics, commercial back-of-house |
These ranges assume a normal residential quantity of 30–150 m². Very small areas often carry a minimum charge, while larger commercial areas can attract lower rates per m².
Supply only versus supply and fit
Supply-only prices look attractive, but they leave you responsible for ordering the right quantity, arranging delivery to the building's loading bay, storing material and finding an installer who will accept responsibility for a product they did not choose. Most installers will not warrant workmanship on a floor if the substrate preparation was done by someone else.
Supply-and-fit pricing bundles material, labor, underlay, standard trims and waste allowance. Ask for the waste factor in writing: typically 5–8% for click flooring laid straight, 10–15% for herringbone patterns or large tiles with many cuts.
What moves the price per square meter
Removing the existing floor
Taking up old ceramic tiles and adhesive bed typically costs AED 25–50 per m², including debris disposal. Removing old carpet or click flooring is cheaper, usually AED 8–20 per m². In towers, debris must go down the service lift in bags at approved times, which adds labor time. One of the main advantages of SPC and laminate is that they can often be laid directly over flat existing tiles, avoiding removal altogether.
Screed and leveling
Click floors need a flat substrate, typically within 3 mm over 2 meters. If the old tiles are uneven or the screed is damaged, a self-leveling compound is applied, typically AED 25–60 per m² depending on thickness. Skipping this step is the most common cause of creaking, joint separation and hollow-sounding floors.
Skirting, trims and thresholds
- MDF or PVC skirting: typically AED 20–45 per linear meter fitted.
- Tile skirting cut from the floor tile: AED 25–60 per linear meter.
- Aluminum or stainless steel profiles at thresholds: AED 40–120 each.
- Undercutting doors so they clear the new floor height: AED 50–120 per door.
Layout and pattern
Herringbone and chevron patterns use more material and take roughly twice as long to lay as straight planks. Large-format tiles need two installers, leveling clips and careful handling, which increases labor per m² even though there are fewer grout lines.
Wet areas and waterproofing
Bathroom and balcony floors need waterproofing beneath the tile, falls towards the drain and a flood test before tiling. Expect bathroom floor tiling to cost more per m² than a living room because of the extra steps and smaller areas.
Choosing the right floor for UAE conditions
- Heat and sunlight: floors near full-height glazing can heat up significantly. SPC with a stable rigid core and UV-stable wear layer copes better than cheap vinyl, and engineered wood needs blinds or UV film to limit fading.
- Humidity and AC: wood products must acclimatise inside the air-conditioned unit for 48–72 hours before installation. Expansion gaps at walls are essential.
- Sand and grit: choose a laminate with AC4 or AC5 abrasion rating, or an SPC wear layer of at least 0.3 mm for homes and 0.5 mm for commercial use.
- Water: SPC and porcelain handle spills well. Laminate and engineered wood are not suitable for bathrooms.
- Acoustics: many tower buildings require an acoustic underlay under hard floors to reduce impact noise for the unit below. Check the building's fit-out rules before ordering.
Lifespan and cost over time
The cheapest floor to install is not always the cheapest floor to own. When you compare options, think about how long each will last in your situation and what it costs to maintain.
- SPC: typically 10–20 years in residential use, depending on wear layer thickness. Scratches cannot be sanded out, but damaged planks can be replaced individually if you keep spares from the same batch.
- Laminate: typically 8–15 years. Sensitive to standing water at the joints, so mop with a damp rather than wet cloth.
- Engineered wood: 20 years or more. A wear layer of 3–4 mm allows one or two sand-and-refinish cycles, typically AED 60–120 per m² each time.
- Porcelain: 25 years or more. Grout may need deep cleaning or resealing every few years, typically AED 15–35 per m².
- Marble: lasts for decades but needs periodic polishing and sealing, typically AED 25–60 per m² per treatment, and is easily etched by acidic spills.
For a rental apartment you may re-let every few years, SPC or porcelain usually gives the best balance. For a family villa you plan to keep, engineered wood or large-format porcelain often justifies the higher initial outlay. Keep a box of spare planks or tiles after installation; matching the exact shade years later can be difficult.
Worked example: a two-bedroom apartment
Consider a two-bedroom apartment in Jumeirah Village Circle with 85 m² of floor area outside the bathrooms and kitchen. Replacing tired beige tiles with SPC laid directly over them might cost, as a typical range:
- SPC supply and fit, 85 m² at AED 85–120: AED 7,200–10,200
- Acoustic underlay where required: AED 600–1,300
- Skirting, 75 linear meters at AED 25–40: AED 1,900–3,000
- Threshold profiles and door undercutting: AED 600–1,200
Total: roughly AED 10,300–15,700 before VAT, completed in two to four working days. The same area in engineered wood, with tile removal and leveling, could easily reach AED 25,000–42,000.
What to watch out for
- Quoting on floor plan area only: the quotation should state the measured area and the waste allowance separately.
- Missing exclusions: ask whether removal, leveling, skirting and furniture moving are included. If not, they will appear later as variations.
- Unknown product specifications: a good quotation names the thickness, wear layer or abrasion class, core type and warranty period, even if no brand is listed.
- No acclimatisation: wood and laminate fitted straight from a hot warehouse can move and gap within weeks.
- Building approvals: towers and gated communities often require a work permit, and some require proof of acoustic underlay. Read our guide on comparing renovation quotations before choosing a contractor.
FIXORA Decor measures every room on site, checks the flatness of the existing floor and confirms building rules before issuing a fixed quotation. If you are also repainting, it usually makes sense to paint first and fit the floor afterwards so the new surface is not exposed to drips; our apartment painting cost guide covers that side of the budget.
Next step
Send us your floor plan or approximate room sizes and the finish you have in mind, and we will prepare a free quotation with supply-and-fit pricing, leveling allowances and timings. You can also explore our flooring services to see the materials FIXORA Decor installs across Dubai.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



