Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Salon and Barbershop Fit-Out in Dubai: A Practical Guide

Planning a salon or barbershop in Dubai: station layout, plumbing for basins, ventilation for chemicals, Dubai Municipality approvals and finishes that survive heavy daily use.

Updated 13 Oct 20266 min read
Salon and Barbershop Fit-Out in Dubai: A Practical Guide
In this article

Quick answer

Planning a salon or barbershop in Dubai: station layout, plumbing for basins, ventilation for chemicals, Dubai Municipality approvals and finishes that survive heavy daily use. A salon or barbershop fit-out in Dubai looks simple on paper: chairs, mirrors, basins and a reception desk.

Key facts

  • As a guide, a mid-range salon fit-out typically costs AED 1,800–4,000 per m² for partitions, ceilings, flooring, MEP, joinery and lighting.
  • Styling chairs, backwash units, dryers and treatment beds are usually bought separately and can add AED 3,000–12,000 per station depending on specification.
  • Bespoke mirrors and station joinery typically range from AED 2,500 to AED 8,000 per station.
  • All figures are typical ranges, exclusive of 5% VAT, and depend on the unit's existing condition.

Last updated:

A salon or barbershop fit-out in Dubai looks simple on paper: chairs, mirrors, basins and a reception desk. In practice the success of the space depends on plumbing for each wash station, ventilation that handles chemical fumes and heat, electrical circuits that cope with dryers and styling tools, and finishes that survive water, dye and constant cleaning. Beauty and grooming premises also need public health approvals from Dubai Municipality or the relevant authority. A typical 60–150 m² salon takes around 8–14 weeks from design to opening, with fit-out costs typically between AED 1,800 and AED 4,000 per m² before furniture and equipment.

Plan the layout around stations

The station is the unit of design. Decide how many cutting, coloring, washing and treatment stations the business plan needs, then lay out the space around them. Typical planning points:

  • Cutting stations: allow roughly 1.5–1.8 m between chair centers so stylists can move around clients without bumping neighbors.
  • Wash area: group basins together to simplify drainage and water supply, ideally away from the entrance where splashing and noise are less visible.
  • Color bar or dispensary: a dedicated mixing area with sink, worktop, storage and extraction, out of client view.
  • Treatment rooms: separate, private rooms for nails, waxing, facials or massage, depending on the license activities.
  • Back of house: laundry for towels, staff area, storage and a cleaner's sink.

Barbershops usually need fewer wash basins, since many clients are washed at the chair or not at all, which frees space for more chairs. Ladies' salons often need privacy screening from the street or mall corridor.

Plumbing for each station

Plumbing is the most common source of problems in salons. Each backwash basin needs hot and cold supply, a waste connection and a hair trap. Points to get right:

  • Run waste pipes with adequate falls and access points, because hair and product residue cause blockages.
  • Fit hair traps at each basin and agree a cleaning routine with the operator.
  • Size the water heater for peak demand, as several basins may run at once on busy evenings.
  • Where the slab cannot be cored, use raised platforms or a pumped waste system, and confirm the landlord allows them.
  • Install isolation valves per basin so one leak does not close the whole salon.

In towers and malls, coring the slab for new drainage usually needs landlord approval and a structural check, so confirm the drainage route before you finalize the layout.

Ventilation, cooling and power

Hair color, bleach, nail products and keratin treatments release fumes. Good fresh air supply and dedicated extraction near the color bar and nail stations protect staff and clients and are increasingly expected by inspectors. Dryers and styling tools also add heat, so cooling loads are higher than in a shop of the same size. On the electrical side, plan dedicated circuits for stations and dryers, socket positions at each mirror, and lighting that renders color accurately: a high color rendering index (CRI 90 or above) and a neutral color temperature around 4000K help stylists judge color work.

Approvals for beauty premises

Salons, barbershops and spas are classed as public health premises. In mainland Dubai, Dubai Municipality sets health and safety requirements covering hygiene, finishes, sterilization of tools, waste disposal and staff facilities, and inspects before trading. Fit-out works also need the usual permits and Dubai Civil Defence approval for fire and life safety changes. In free zones and some communities, the zone authority or master developer manages the process. Fees apply, and requirements change over time, so check current guidance before submitting drawings. If the salon is in a mall, the landlord's process applies on top; see our guide to retail fit-out in Dubai malls.

Finishes, hygiene and storage

Finishes that last

Salon finishes face water, chemicals, hair, hot tools and constant cleaning. Choose materials for durability first, then for appearance:

AreaDurable optionAvoid
FloorsPorcelain tiles with tight grout, or seamless resin; luxury vinyl in dry zonesNatural stone that stains, soft timber
Wash area wallsLarge-format porcelain or compact laminate panelsMatte emulsion paint, wallpaper
Station worktopsSolid surface, compact laminate or quartzRaw MDF edges, porous stone
UpholsteryCommercial-grade vinyl or coated fabricLight woven fabric near color areas
Color barStainless steel or solid surface with integral sinkLaminate with exposed joints at the sink

Floor color matters too: very dark floors show hair and dust, very light floors show dye spills. Mid-tone, lightly patterned surfaces are easiest to keep looking clean.

Hygiene, sterilization and storage

Inspectors look closely at how tools and linen are cleaned and stored. Plan a dedicated area for cleaning and sterilizing combs, scissors, clippers and nail tools, with a sink, worktop and space for a sterilizer or UV cabinet. Clean and used towels should be stored separately, and a small laundry area with a washing machine and dryer saves money if the business launders in-house; it needs a water supply, drainage and extraction for the dryer. Provide closed storage for chemicals and products, ideally ventilated and out of reach of clients. Staff need a changing area, lockers and access to a toilet that does not open directly onto treatment areas.

Reception, retail and client comfort

Reception is the first and last impression, so plan it for both function and brand. Allow space for a counter with a payment terminal, appointment screen and a small retail display for take-home products, which can be a meaningful revenue line. Waiting seating should be comfortable but compact. Inside, think about how the client experiences the space: avoid basins positioned so clients lie with their head towards a busy walkway, provide neck-friendly backwash units with adjustable chairs, and keep dryers and loud equipment away from treatment rooms. A modest sound system, well-balanced cooling and good acoustic absorption make the salon feel calmer during busy periods.

Program

A typical sequence is two to three weeks for design and layout, two to four weeks for approvals, and four to six weeks of works, followed by inspections. Mall salons may take longer because of night working and landlord review stages.

Typical costs and running costs

As a guide, a mid-range salon fit-out typically costs AED 1,800–4,000 per m² for partitions, ceilings, flooring, MEP, joinery and lighting. Styling chairs, backwash units, dryers and treatment beds are usually bought separately and can add AED 3,000–12,000 per station depending on specification. Bespoke mirrors and station joinery typically range from AED 2,500 to AED 8,000 per station. All figures are typical ranges, exclusive of 5% VAT, and depend on the unit's existing condition.

Running costs and sustainability

Salons use a lot of water, hot water and electricity, so efficient choices pay back every month. Water-saving aerators on basins, well-insulated hot water pipework, LED lighting with good color quality, and AC units sized correctly for the heat from dryers all reduce DEWA bills. Durable finishes also lower long-term costs, because the salon will not need repainting or reupholstering every year.

What to watch out for

  • Fixing the basin positions before confirming the drainage route.
  • No extraction at the color bar or nail area.
  • Lighting chosen for mood rather than for color accuracy at the mirror.
  • Too few sockets, leading to extension leads at every station.
  • Finishes that look good at handover but stain within months.

FIXORA Decor typically reviews drainage, power and ventilation in the first site visit, because those three items decide what the layout can be. Getting them right early protects both the budget and the opening date.

Next step

Tell us the number of stations, services and the unit location, and FIXORA Decor will prepare a practical layout and cost plan. Request a free quotation or see our joinery and carpentry service for bespoke stations and reception counters.

The information in this article is general guidance, not advice for your specific project. See our Terms.

Frequently asked questions

Yes. Salons and barbershops are public health premises, so Dubai Municipality or the relevant zone authority sets hygiene and facility requirements and inspects before you trade. Fit-out works also need permits and Civil Defence approval for fire safety changes.
It depends on the services. A ladies' salon often needs one basin for every three to four cutting stations, while a barbershop may manage with one or two. Base the number on peak bookings rather than average days.
Use fittings with a color rendering index of 90 or higher and a neutral color temperature around 4000K at the mirrors. Mixed warm and cool lighting makes color difficult to judge and can lead to client complaints.
Sometimes, if the building permits the use and drainage for basins can be achieved. Coring through slabs needs landlord and structural approval, and pumped waste systems may be an option where gravity drainage is not possible.

Sources

Was this article helpful?

Get new articles by email

Practical tips now and then. Confirm by email, unsubscribe any time.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving