In this article
Quick answer
What to check before turning an Al Quoz warehouse into offices or a studio: permitted use, mezzanine floors, roof and wall insulation, air conditioning loads, approvals and typical costs. Converting a warehouse into offices in Al Quoz can give a business generous ceiling heights, a ground-floor presence and a character that tower offices rarely offer.
Key facts
- Steel mezzanines typically cost AED 650–1,300 per m² for structure and deck, before finishes, stairs, balustrades and fire protection.
- Typical costs range from AED 60–180 per m² for spray foam or insulated ceilings, and considerably more for new composite roof panels.
- A well-insulated office in Dubai typically needs around 1 ton of refrigeration for every 20–30 m², depending on occupancy, glazing and equipment.
Last updated:
Converting a warehouse into offices in Al Quoz can give a business generous ceiling heights, a ground-floor presence and a character that tower offices rarely offer. It also brings technical challenges: lightweight metal roofs that turn the space into an oven in summer, mezzanines that need structural and fire approvals, and air conditioning loads far higher than a standard office. A typical 400–800 m² conversion takes around 14–24 weeks including approvals, with costs that commonly range from AED 1,800 to AED 4,000 per m² depending on insulation, mezzanine area and finish level.
Check the permitted use first
Al Quoz industrial plots are zoned for specific activities, and an office, showroom, studio or creative workspace is a different use from storage. Before committing, confirm with the landlord and the authorities whether the plot and building allow your activity, and whether a change of use or additional approvals are required. Ask for the building's approved drawings and completion certificate. Points to clarify:
- The approved use and any restrictions on occupancy or public visitors.
- Whether the trade license activity can be registered at that address.
- Parking requirements for the number of staff and visitors.
- Whether the landlord permits mezzanines, roof works and new external openings.
Dubai Municipality, Dubai Civil Defence and DEWA are usually involved; fees apply and requirements depend on the plot and the scope of works.
Mezzanine floors
A mezzanine is the most common way to add usable area in a high warehouse. A typical design uses a steel frame with composite or concrete-topped deck, or a lighter steel deck with fire-rated boards, depending on loads and approvals. Key considerations:
- Structure: a structural engineer should check the existing slab and foundations for new column loads, and design the mezzanine for office live loads.
- Fire: mezzanines affect escape distances, may need protected stairs, fire-rated steel protection and extension of sprinklers and alarms beneath and above.
- Headroom: aim for comfortable clear heights above and below once ceilings, ducts and lights are installed.
- Approvals: new floor area typically needs authority approval, and may affect the permitted gross floor area of the plot.
Steel mezzanines typically cost AED 650–1,300 per m² for structure and deck, before finishes, stairs, balustrades and fire protection.
Insulation and cooling
The building envelope
Most older Al Quoz warehouses have single-skin metal roofs and blockwork or metal-clad walls with little or no insulation. In July and August, roof surface temperatures can exceed 70°C, and that heat radiates straight into the space. Improving the envelope is the most cost-effective step in the whole conversion. Options include:
- Spray-applied polyurethane foam insulation to the underside of the roof sheeting.
- Insulated suspended ceilings with mineral wool or rigid board above, creating a buffer void.
- An insulated over-roof or replacement with composite insulated panels where budget allows.
- Reflective roof coatings to reduce solar gain.
- Internal insulated drylining to exposed walls, and sealing gaps at eaves and doors.
Typical costs range from AED 60–180 per m² for spray foam or insulated ceilings, and considerably more for new composite roof panels.
Air conditioning loads
A well-insulated office in Dubai typically needs around 1 ton of refrigeration for every 20–30 m², depending on occupancy, glazing and equipment. An uninsulated warehouse can need substantially more for the same area, and large air volumes in high spaces add to the challenge. Practical approaches:
- Reduce the conditioned volume with ceilings or by enclosing work zones, rather than cooling the full height.
- Use ducted split or packaged units sized on a proper heat load calculation, not rules of thumb alone.
- Provide treated fresh air, because sealed warehouses can become stuffy and humid when occupied.
- Check DEWA supply capacity early; a load increase can take weeks and may need a new meter or substation works.
Fire safety and approvals
Changing a warehouse into offices increases the number of people in the building and changes how they escape in an emergency. Dubai Civil Defence will look at the new layout as a whole. Typical requirements include:
- A fire alarm and detection system suited to office occupancy, often extending or replacing the warehouse system.
- Sprinkler coverage adjusted for new ceilings, mezzanines and enclosed rooms, where the building has sprinklers.
- Emergency lighting and illuminated exit signage along all escape routes.
- Travel distances to exits within permitted limits, which may require additional exit doors.
- Fire-rated separation between offices and any remaining storage or workshop area.
- Finishes and insulation materials with appropriate fire performance; some foam insulation products need a fire-rated covering.
If part of the unit stays as storage or a workshop, the separation between that zone and the offices is especially important and should be designed early.
Approvals sequence
A practical order of work is: confirm permitted use and landlord consent; commission a measured survey, structural assessment and heat load calculation; prepare design drawings; submit to Dubai Municipality and Dubai Civil Defence; apply for any DEWA load increase in parallel; start works once permits are issued; and finish with inspections and completion certificates. Each step depends on the one before, so programs that skip the survey stage often stall at approval.
Typical cost bands
| Scope | Typical range | What it usually includes |
|---|---|---|
| Basic conversion | AED 1,800–2,500 per m² | Insulated ceilings, split AC, open-plan offices, toilets |
| Mid-range office or studio | AED 2,500–3,300 per m² | Mezzanine areas, meeting rooms, ducted AC, upgraded finishes |
| High-specification creative space | AED 3,300–4,000+ per m² | Roof upgrade, glazed partitions, feature lighting, acoustic treatment |
Ranges are typical, exclusive of 5% VAT, and exclude furniture, IT and authority fees. Industrial spaces with hard surfaces and high ceilings can be noisy, so read our guide to acoustic design for open-plan offices before finalizing finishes.
Practical details that matter
Toilets and pantry
Warehouses often have only basic toilets near the loading bay. Office occupancy usually means more toilets, accessible facilities and a pantry, which need drainage routes. Check where the sewer connection is before placing them.
Daylight and openings
New windows or rooflights improve the space dramatically but need structural and authority approvals. Consider solar control glazing to avoid adding heat load.
Working conditions during works
Roof insulation and external works fall under the midday outdoor work break from 15 June to 15 September (12:30–15:00), which affects program if your project runs through summer.
Keeping the industrial character
Much of the appeal of a warehouse office is its character, and a good conversion keeps it rather than hiding everything behind plasterboard. Exposed steel portal frames can be cleaned and painted in a strong color, polished or sealed concrete floors can remain in circulation areas, and services can run in neat, exposed routes. The challenge is to combine that look with comfort: insulated ceilings can be limited to work zones, acoustic baffles can hang between trusses, and glazed partitions can create meeting rooms without breaking up the volume. Plan exposed services carefully, because ductwork, cable trays and sprinkler pipes become part of the design and need to be coordinated and installed neatly.
What to watch out for
- Signing a long lease before confirming the use is permitted.
- Building a mezzanine without structural and fire approvals.
- Skipping insulation to save money, then paying for it in oversized AC and DEWA bills.
- Underestimating fresh air and humidity control.
- Ignoring drainage when positioning toilets and pantries.
FIXORA Decor starts warehouse conversions with a survey of the roof, slab, drainage and power, because those findings determine the budget more than the interior design does.
Next step
Send us the plot details, approved drawings and your space requirements, and FIXORA Decor will advise on feasibility and a realistic budget. Request a free quotation or explore our turnkey fit-out service.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Sources
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



