In this article
Quick answer
Indicative 2026 villa renovation cost per sq ft in Dubai for basic, mid-range, premium and luxury finishes, with room-by-room figures, hidden costs, approvals and how to keep your budget under control. Contractors in Dubai often talk about cost per sq ft because it gives owners a quick sense of scale.
Key facts
- Villa renovation cost per sq ft in Dubai: the 2026 finish levels
- Main kitchen: AED 45,000–120,000 depending on cabinet material, worktop, appliances and whether the layout changes.
- Dirty kitchen or service kitchen: AED 18,000–45,000, often with simpler cabinets and heavy-duty tiles.
- Full bathroom rebuild: AED 25,000–60,000 per bathroom including waterproofing, tiles, sanitaryware and glass.
- Powder room: AED 10,000–25,000.
- Living and dining areas: AED 90–200 per sq ft for flooring, ceilings, lighting and painting.
Last updated:
In 2026, a villa renovation in Dubai typically costs around AED 80–150 per sq ft for a basic refresh, AED 150–300 per sq ft for a mid-range renovation, AED 300–550 per sq ft for a premium renovation and AED 550 per sq ft or more for luxury work with bespoke joinery and natural stone, excluding 5% VAT. These are indicative ranges based on built-up area; the real figure depends on how much you strip out, how many wet areas you rebuild and whether any MEP or structural work is involved.
This guide explains what each finish level actually buys you, how villa renovation cost per sq ft changes between communities such as Arabian Ranches, Dubai Hills, The Springs, Jumeirah and Palm Jumeirah, and which items quietly inflate a budget if they are not planned from the start.
Villa renovation cost per sq ft in Dubai: the 2026 finish levels
Contractors in Dubai often talk about cost per sq ft because it gives owners a quick sense of scale. It is a useful starting point, but only if everyone uses the same definition of the area (built-up area, not plot size) and the same definition of the finish level. The table below shows how most fit-out companies would group a typical three to five bedroom villa.
| Finish level | Indicative cost per sq ft (AED, excl. VAT) | What it usually includes |
|---|---|---|
| Basic refresh | 80–150 | Painting, minor repairs, new light fittings, sanitaryware swaps, laminate or SPC flooring in bedrooms |
| Mid-range | 150–300 | New kitchen with quartz worktop, two or three bathrooms rebuilt, porcelain flooring, false ceilings with LED lighting, new interior doors |
| Premium | 300–550 | Layout changes, full kitchen and all bathrooms, large-format porcelain or engineered wood, feature walls, built-in wardrobes, smart lighting |
| Luxury | 550+ | Natural marble, bespoke joinery throughout, designer sanitaryware, home automation, specialist lighting design, landscaping and pool upgrades |
For a 3,500 sq ft villa, that translates roughly to AED 280,000–525,000 for a basic refresh, AED 525,000–1,050,000 for mid-range and from about AED 1,050,000 upwards for premium work. Many owners do not renovate every square foot at the same level, which is why a blended estimate is usually more realistic than a single rate.
Why cost per sq ft is only a starting point
Two villas with the same built-up area can have very different renovation budgets. A villa with four bathrooms and a maid's room bathroom has far more expensive wet-area work than one with three. A villa where you keep the kitchen layout costs less than one where you move the sink to an island, because plumbing, drainage and electrical points all move too. Use cost per sq ft to set an early budget, then replace it with an itemized bill of quantities as soon as the design is fixed.
Room-by-room renovation costs for a Dubai villa
Breaking the villa into rooms is the easiest way to see where the money goes. The following indicative 2026 ranges assume a mid-range specification in a typical family villa.
- Main kitchen: AED 45,000–120,000 depending on cabinet material, worktop, appliances and whether the layout changes.
- Dirty kitchen or service kitchen: AED 18,000–45,000, often with simpler cabinets and heavy-duty tiles.
- Full bathroom rebuild: AED 25,000–60,000 per bathroom including waterproofing, tiles, sanitaryware and glass.
- Powder room: AED 10,000–25,000.
- Living and dining areas: AED 90–200 per sq ft for flooring, ceilings, lighting and painting.
- Bedrooms: AED 15,000–45,000 each with new flooring, wardrobes and lighting.
- Majlis: AED 30,000–120,000 depending on wall paneling, ceiling details and lighting.
- Maid's room and laundry: AED 8,000–25,000.
- Staircase upgrade: AED 15,000–60,000 for new cladding, handrail and lighting.
Outdoor work such as pergolas, landscaping, pool refurbishment and boundary wall treatments is normally priced separately and can add anywhere from AED 30,000 to several hundred thousand dirhams.
How location and community affect the price
The rates for labor and materials are broadly similar across Dubai, but communities influence cost through access rules, approval requirements and expectations about finish.
- Arabian Ranches, The Springs, The Meadows and The Lakes: many villas from the early 2000s need replacement of original kitchens, bathrooms and AC systems at the same time, which increases scope.
- Dubai Hills Estate and newer Emaar communities: newer villas usually need less MEP work, so budgets go further on finishes and joinery.
- Palm Jumeirah and Emirates Hills: larger areas, premium expectations and stricter community requirements typically push projects into the premium and luxury bands.
- Jumeirah, Al Barsha and Umm Suqeim freehold or private villas: older construction can hide surprises behind tiles and ceilings, so a contingency is essential.
- Abu Dhabi and Sharjah: similar rate ranges apply, but the approval route is different, so allow time and fees accordingly.
Approvals and their effect on your budget
Most villa renovations in master communities need a developer or master community NOC before work starts, for example from Emaar or Nakheel. Work that changes structure, adds area, alters the facade or affects MEP systems may also need Dubai Municipality or Trakhees approval, depending on the plot, and fire and life safety changes may involve Dubai Civil Defence. Each authority sets its own fees and documentation, which change from time to time, so check the current requirements with the authority or ask your contractor to confirm them in writing.
Approval costs themselves are usually a small share of the total, but the design drawings, consultant fees and refundable deposits they require are real budget lines. Allow roughly 3–8% of the construction value for design and approvals on a project that changes layouts or structure. For more detail, read our guide to Dubai Municipality permits for home renovation.
Hidden costs that change the final number
The most common reason a villa renovation goes over budget is not price inflation; it is scope discovered after demolition. Plan for these items from the start:
- Waterproofing failures: once old tiles come off, failed membranes and damaged screeds must be replaced, not patched.
- Old AC ducting and units: replacing ducted units or cleaning and re-insulating ducts can add AED 20,000–80,000 in a large villa.
- Electrical upgrades: new kitchens, induction hobs, EV chargers and extra AC capacity may require DB upgrades and possibly a DEWA load review.
- Plumbing replacement: older galvanised or poorly installed pipework is often replaced during bathroom work.
- Leveling and screed: large-format tiles and engineered wood need a flat floor; leveling an uneven slab costs extra per sq m.
- Temporary living costs: if the family moves out for eight to sixteen weeks, rent or a serviced apartment is part of the real budget.
- Debris removal and protection: skips, approved disposal and protecting retained finishes are often underestimated.
A contingency of 10% is common for a newer villa and 15–20% for older stock where hidden conditions are likely.
Timelines and how they relate to cost
Time costs money on a renovation because supervision, site facilities and labor are spread across the program. As an indication, a basic refresh of a three to four bedroom villa takes around three to six weeks, a mid-range renovation eight to fourteen weeks and a premium renovation with layout changes four to eight months including design and approvals. Rushing a program usually means overtime, multiple crews or air-freighted materials, all of which increase the price. Starting in the cooler months is popular, so booking a contractor early in the year can help both scheduling and pricing.
How to keep a villa renovation within budget
- Define the finish level per room. Premium in the kitchen, master suite and majlis, mid-range in secondary bedrooms and basic in service areas is a common and sensible mix.
- Fix the design before pricing. Ask for drawings, a materials schedule and a bill of quantities so contractors price the same thing.
- Choose materials early. Selected tiles, stone and sanitaryware with lead times can delay the project if they are chosen late.
- Keep the plumbing where it is. Moving wet areas is one of the most expensive design decisions.
- Compare like with like. Use our guide on comparing three renovation quotations to normalize scope.
- Phase the work. If the budget is tight, renovate wet areas and MEP first, then upgrade finishes and furniture later.
- Agree a variation process. Every change should be priced and approved in writing before it is built.
Is it better to renovate or sell and buy a newer villa?
Many owners in older communities weigh a full renovation against moving to a newer villa. Renovating usually makes sense when you like the location, the plot and the layout but the finishes and systems are tired. It makes less sense if the layout fundamentally does not work for your family, because layout changes are where costs escalate. A designer can prepare a concept and a cost plan for a modest fee, which gives you real numbers to compare against transaction costs and the price of newer stock.
Example budgets for 2026
To illustrate how the bands combine, here are three indicative scenarios. They are examples, not quotations.
- Three-bedroom townhouse, 2,200 sq ft, basic plus kitchen upgrade: paint, SPC flooring upstairs, new kitchen and one bathroom rebuilt. Around AED 220,000–330,000.
- Four-bedroom villa, 3,800 sq ft, mid-range: new kitchen and dirty kitchen, four bathrooms, porcelain flooring, false ceilings and lighting, new doors and wardrobes. Around AED 650,000–1,000,000.
- Five-bedroom villa, 6,000 sq ft, premium: layout changes, marble and engineered wood, full joinery package, smart lighting and new AC. Around AED 2,000,000–3,300,000.
Key takeaways
- Indicative 2026 villa renovation cost per sq ft in Dubai runs from about AED 80 for a basic refresh to AED 550 and above for luxury work, excluding VAT.
- Wet areas, MEP and layout changes drive cost more than decorative finishes.
- Approvals from the master developer and, where needed, Dubai Municipality or Trakhees take time and must be in the plan.
- Keep a 10–20% contingency and fix the design before you compare quotations.
Get a costed plan for your villa
FIXORA Decor renovates villas across Dubai, from quick refreshes to full premium transformations. We survey the villa, agree the finish level room by room and give you an itemized quotation with clear allowances for hidden conditions. Message us on WhatsApp +971501962136 or request a quotation to get started.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Sources
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



