In this article
Quick answer
Typical per m² prices for gypsum stud and glass partitions in Dubai, from single-skin dividers to acoustic double-stud walls and double-glazed meeting room fronts. Prices are supplied and installed, exclusive of 5% VAT. Doors, finishes and fire or acoustic requirements are the main variables.
Key facts
- Prices are supplied and installed, exclusive of 5% VAT.
- Door openings with steel frames or timber lining: typically AED 250–600 per opening, excluding the door leaf.
- Timber or plywood backing for wall-hung cabinets and TVs: AED 40–100 per m² of reinforced area.
- Moisture-resistant board in wet areas: AED 15–30 per m² extra.
- Painting: typically AED 15–25 per m² per side.
- Typically 20–40% more expensive.
Last updated:
Partitions in Dubai typically cost AED 90–150 per m² for a single-stud gypsum wall with one board each side, AED 150–260 per m² for a double-boarded wall with insulation, AED 250–400 per m² for an acoustic double-stud wall, and AED 450–1,800 per m² for glass partitions depending on whether they are framed, frameless, single or double glazed. Prices are supplied and installed, exclusive of 5% VAT. Doors, finishes and fire or acoustic requirements are the main variables.
This guide compares the main partition types for homes and offices, what each costs, and how to choose the right specification for privacy, sound and appearance.
Typical partition prices per m²
| Partition type | Typical AED per m² (excl. VAT) | Typical acoustic performance | Typical use |
|---|---|---|---|
| Gypsum, single stud, one board each side | 90–150 | Basic, around Rw 35–40 dB | Store rooms, simple room dividers |
| Gypsum, single stud, two boards each side, mineral wool | 150–260 | Good, around Rw 45–50 dB | Bedrooms, offices, meeting rooms |
| Gypsum, double stud, acoustic | 250–400 | High, Rw 55 dB and above | Boardrooms, studios, clinics, home cinemas |
| Fire-rated gypsum (tested system) | 180–350 | Varies | Escape corridors, plant rooms |
| Glass, framed, single glazed, 10–12 mm toughened | 450–800 | Around Rw 30–35 dB | Office fronts, open meeting areas |
| Glass, frameless, single glazed | 600–1,000 | Around Rw 30–35 dB | Executive offices, premium homes |
| Glass, double glazed acoustic | 1,000–1,800 | Around Rw 40–45 dB | Meeting rooms needing confidentiality |
The acoustic figures are indicative of laboratory ratings for complete systems. Real-world performance depends heavily on sealing at the ceiling, floor and around doors.
Gypsum partitions: options and costs
Gypsum partitions use galvanised steel studs and tracks with gypsum boards screwed to each side. They are lighter and faster to build than blockwork, which matters in towers where structural loads and debris are restricted.
Single skin versus double skin
In trade terms, a single-skin partition has one layer of board on each side; a double-skin partition has two layers on each side. Doubling the boards adds mass, which improves sound insulation, makes the wall more robust for hanging shelves and televisions, and is required for many fire ratings.
Insulation
Filling the stud cavity with mineral wool (rock wool or glass wool) of suitable density is a low-cost upgrade, typically AED 15–35 per m², that noticeably reduces voice transfer between rooms. It also adds thermal insulation where a partition separates an air-conditioned room from an unconditioned store.
Height: to the ceiling or to the slab
A partition that stops at the false ceiling lets sound travel over the top through the ceiling void. For bedrooms, meeting rooms and clinics, take the partition up to the slab or add an acoustic barrier above the ceiling. Building to the slab costs more and must be coordinated with AC ducts and sprinkler pipes, but it is the single most effective acoustic measure.
Extras on gypsum partitions
- Door openings with steel frames or timber lining: typically AED 250–600 per opening, excluding the door leaf.
- Timber or plywood backing for wall-hung cabinets and TVs: AED 40–100 per m² of reinforced area.
- Moisture-resistant board in wet areas: AED 15–30 per m² extra.
- Painting: typically AED 15–25 per m² per side. See our painting cost guide for finish options.
Glass partitions: options and costs
Glass partitions bring daylight deep into floor plates and are popular in Business Bay, DIFC and JLT offices. They are also used in homes for study nooks and walk-in wardrobes.
Glass types
- Toughened (tempered) glass, 10–12 mm, is the standard. It is heat treated to be several times stronger than ordinary glass and breaks into small fragments.
- Laminated glass bonds two sheets with an interlayer. It stays in place if broken and performs better acoustically. Typically 20–40% more expensive.
- Double-glazed systems use two panes with an air gap, giving much better sound separation. Required for confidential meeting rooms.
- Switchable smart glass changes from clear to opaque. Typically AED 2,000–3,500 per m² including controls.
Frames and doors
Framed systems use slim aluminum profiles at the head, base and sometimes at vertical joints. Frameless systems use minimal channels and clear silicone or polycarbonate joints. Glass doors typically cost AED 2,500–6,000 each with hinges or patch fittings, and AED 4,000–9,000 for aluminum-framed doors with acoustic seals and drop-down seals at the base.
Manifestation and privacy film
Large glass panels should have visible manifestation at eye level so people do not walk into them. Frosted or printed film typically costs AED 60–180 per m² and can include company branding.
Worked example: two meeting rooms in an office
Consider a 2,500 sq ft office in JLT where the tenant wants two meeting rooms, each about 4 x 3.5 meters, built along an internal corridor. One room is for general meetings; the other is for confidential discussions. A typical approach and budget might be:
- Glass fronts, framed single glazed, 2 x 4 m wide x 2.8 m high, about 22 m² at AED 450–800: AED 9,900–17,600
- Upgrade the confidential room front to double-glazed acoustic glass, about 11 m² extra at AED 550–1,000 more per m²: AED 6,000–11,000
- Gypsum dividing and back walls, double boarded with mineral wool, taken to the slab, about 40 m² at AED 150–260: AED 6,000–10,400
- Two glass doors with seals and closers: AED 5,000–12,000
- Manifestation film: AED 1,000–2,500
- Painting gypsum walls both sides: AED 1,200–2,000
Partitions alone come to roughly AED 29,000–55,500 before VAT. On top of this, budget for AC, sprinkler, smoke detector and lighting changes inside the new rooms, which often equal or exceed the partition cost itself in a commercial fit-out.
In a home, the numbers are smaller but the logic is the same. Creating a study or a third bedroom from part of a large living room in a Dubai Hills Estate or Town Square apartment typically needs around 10–15 m² of insulated gypsum partition, a door, a light point, two or three sockets and an AC adjustment. A typical budget for that kind of conversion is AED 6,000–14,000 before VAT, depending on finishes and whether the AC needs a new diffuser or a separate unit. Check the building rules first, as some buildings do not allow additional enclosed rooms without approval.
Approvals and building rules
In apartments and villas, new partitions usually need building management or developer approval, and changes to room layouts can affect fire alarm coverage and AC distribution. In offices, any partition that changes the room layout needs fit-out approval from the landlord and the relevant authority, plus a review of sprinklers, smoke detectors and emergency lighting by a Dubai Civil Defence approved contractor. Our office fit-out cost guide explains how these approvals fit into a commercial budget.
What to watch out for
- Acoustic claims without detail: a partition is only as good as its weakest point. Ask how the head, base, doors and penetrations will be sealed.
- Missing backing: forgetting plywood inside the stud wall before boarding makes it difficult to hang heavy items later.
- Non-toughened glass: all glass in partitions and doors should be safety glass. Ask for confirmation in writing.
- Ignoring services: partitions installed under existing diffusers or sprinkler heads may need costly relocation.
- Comparing per m² prices without doors: doors and ironmongery can be 20–30% of a partition package.
FIXORA Decor designs partitions around how a room is used, specifying the acoustic, fire and finish requirements first, then pricing the system that meets them. That approach keeps FIXORA Decor quotations comparable and avoids paying for performance you do not need.
Next step
Send us a floor plan with the partitions marked and the purpose of each room, and we will prepare a free quotation with partition types, doors and finishes itemized. For complete office or home layouts, see our turnkey fit-out service.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Sources
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



