Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

How VAT Applies to Fit-Out and Maintenance Invoices in the UAE

A practical guide to 5% VAT on renovation, fit-out and maintenance work in the UAE: what a valid tax invoice must show, how deposits and retention are treated and what to check before paying.

Updated 13 Oct 20266 min read
How VAT Applies to Fit-Out and Maintenance Invoices in the UAE
In this article

Quick answer

A practical guide to 5% VAT on renovation, fit-out and maintenance work in the UAE: what a valid tax invoice must show, how deposits and retention are treated and what to check before paying. Fit-out, renovation and maintenance work in the UAE is generally subject to VAT at the standard rate of 5%, charged by contractors registered for VAT.

Key facts

  • Fit-out, renovation and maintenance work in the UAE is generally subject to VAT at the standard rate of 5%, charged by contractors registered for VAT.
  • Rate: renovation, fit-out, interior design, joinery, painting, flooring, AC servicing and handyman work are standard-rated at 5% in the UAE.
  • Tax invoices are generally due within 14 days of the date of supply.
  • A deposit of AED 50,000 excluding VAT should therefore be accompanied by AED 2,500 VAT and a corresponding tax invoice.
  • Commercial fit-out contracts often hold back 5–10% of each payment as retention until the end of the defects liability period.
  • Homeowners and tenants renovating their own homes are not VAT registered, so the 5% is a cost.

Last updated:

Fit-out, renovation and maintenance work in the UAE is generally subject to VAT at the standard rate of 5%, charged by contractors registered for VAT. A registered contractor must show their Tax Registration Number (TRN) on a valid tax invoice, VAT normally becomes due on deposits when they are paid, and each stage payment creates its own VAT point. Businesses registered for VAT can usually recover the VAT on fit-out costs; homeowners and tenants generally cannot, so for them the 5% is a real addition to the budget.

This guide explains how VAT works on a typical fit-out or maintenance contract and what to check on every invoice. It is general information, not tax advice; for your own position, speak to a qualified tax adviser.

The basics: rate, registration and TRN

  • Rate: renovation, fit-out, interior design, joinery, painting, flooring, AC servicing and handyman work are standard-rated at 5% in the UAE.
  • Who charges VAT: only businesses registered with the Federal Tax Authority can charge VAT. Registration is mandatory when taxable supplies exceed AED 375,000 over the previous 12 months or are expected to in the next 30 days, and voluntary above AED 187,500.
  • TRN: every registered business has a 15-digit Tax Registration Number. It must appear on tax invoices. If a contractor charges VAT but cannot show a TRN, do not pay the VAT element until this is resolved.
  • Small contractors: an unregistered contractor cannot charge VAT. Their price should not include a VAT line.

What a valid tax invoice must show

A full tax invoice in the UAE must include the following details:

  • The words Tax Invoice clearly displayed.
  • The supplier's name, address and TRN.
  • The recipient's name, address and TRN, if the recipient is VAT registered.
  • A sequential invoice number.
  • The date of issue and the date of supply if different.
  • A description of the goods or services supplied.
  • For each item, the quantity or volume, unit price, taxable amount, VAT rate and VAT amount.
  • Any discount offered.
  • The total amount payable, with the total VAT shown in AED.

A simplified tax invoice with fewer details is allowed where the recipient is not VAT registered, or where the recipient is registered and the invoice value does not exceed AED 10,000. Businesses that intend to reclaim VAT should ask for a full tax invoice regardless of value. Tax invoices are generally due within 14 days of the date of supply.

The UAE is also introducing mandatory electronic invoicing in phases for businesses, which will change how invoices are issued and transmitted. If you are a VAT-registered business, check with your adviser how the timeline applies to you and your contractors.

How VAT applies at each stage of a contract

Payment stageWhen VAT is typically dueWhat you should receive
Design feeOn invoice or payment, whichever is earlierTax invoice for the design service
Advance payment or deposit (e.g. 20–40%)When the payment is receivedTax invoice or receipt treated as one for the advance
Stage or progress paymentsEarliest of invoice date, payment date or payment due date for that stageTax invoice per stage, showing work completed
VariationsAs part of the relevant stage invoiceSeparate line items with VAT shown
Retention (e.g. 5–10%)Depends on how the contract and invoicing are structuredClear treatment agreed in the contract
Final accountOn issue of final invoice or paymentFinal tax invoice reconciling all stages

Deposits and advance payments

When you pay a deposit before work starts, VAT is generally due at the point the contractor receives it. A deposit of AED 50,000 excluding VAT should therefore be accompanied by AED 2,500 VAT and a corresponding tax invoice. Be cautious if a contractor asks for a deposit without issuing any VAT documentation.

Stage payments

Most fit-out contracts are paid in stages linked to milestones, such as completion of strip-out, first fix MEP, ceilings and partitions, joinery installation and handover. For contracts with periodic payments, the VAT point is typically the earliest of the invoice date, the date payment is received or the date payment is due. Each stage should be invoiced separately with VAT shown.

Retention

Commercial fit-out contracts often hold back 5–10% of each payment as retention until the end of the defects liability period. The VAT treatment of retention depends on how the contract and invoicing are structured, for example whether the retention is invoiced at the time of the stage or only when released. Agree this in writing at the start, and take advice if the amounts are significant.

Variations and credit notes

Every variation should be priced, approved in writing and then invoiced with VAT. If an amount is reduced after invoicing, for example because a scope item is omitted, the contractor should issue a tax credit note rather than simply sending a revised invoice.

Who can recover the VAT

  • VAT-registered businesses fitting out offices, shops, clinics or restaurants can generally recover input VAT on fit-out costs, provided they hold valid tax invoices and the costs relate to taxable business activities.
  • Homeowners and tenants renovating their own homes are not VAT registered, so the 5% is a cost. Budget for it from the start. On a AED 120,000 kitchen and bathroom project, that is AED 6,000.
  • Landlords letting residential property generally make exempt supplies, so they usually cannot recover VAT on refurbishments of residential units. Commercial landlords may be able to recover it.

Rules for specific cases, such as new residential buildings and mixed-use property, can be complex. Ask your adviser before assuming VAT is recoverable.

VAT on maintenance contracts and small jobs

The same 5% applies to maintenance work, but the invoicing pattern is different from a fit-out project.

  • Annual maintenance contracts: if an AMC is paid upfront for the year, VAT is generally due on the full amount when it is paid or invoiced. If it is paid monthly or quarterly, each installment carries its own VAT.
  • Call-outs and small repairs: each visit is normally invoiced separately. A simplified tax invoice is acceptable for consumers, but businesses that want to recover VAT should ask for a full tax invoice addressed to the company.
  • Materials and parts: parts supplied as part of the job are part of the same taxable supply and carry 5% VAT, even if they are shown on separate lines.
  • Landlords recharging tenants: where a landlord pays for a repair and recharges it to a tenant, the VAT treatment of the recharge depends on the landlord's own position and the lease terms. Take advice if this happens regularly.

Facility managers handling many small invoices should agree a monthly consolidated invoicing arrangement with their maintenance provider, with each visit listed separately. It makes VAT recovery and audit trails far easier.

What to check before you pay

  • Is the quotation clearly marked as inclusive or exclusive of 5% VAT? Our guide to comparing three renovation quotations explains why this matters when lining up offers.
  • Does the invoice show the contractor's TRN, and does it match the trade license name?
  • Are your company name, address and TRN correct, if you are registered?
  • Does each stage invoice relate to work actually completed?
  • Are variations listed separately with VAT?
  • Is the total VAT stated in AED?

Common mistakes

  • Paying VAT to a contractor who is not registered.
  • Accepting a single lump-sum invoice at the end for a project paid in stages.
  • Losing invoices: businesses should keep tax records for at least five years, and longer in some cases.
  • Assuming a quoted price includes VAT when it does not, which can add thousands to a villa budget. See the villa renovation budget guide for how VAT fits into overall planning.

FIXORA Decor issues tax invoices showing our TRN for every stage of a project, with variations and retention treated as agreed in the contract. If your finance team needs a specific invoice format for VAT recovery, FIXORA Decor can accommodate it.

Next step

Request a free quotation that shows prices both before and after VAT, with a clear payment schedule. For complete projects with staged invoicing and a single point of contact, see our turnkey fit-out service.

The information in this article is general guidance, not advice for your specific project. See our Terms.

Frequently asked questions

Yes. Renovation, fit-out and maintenance services supplied by a VAT-registered contractor are standard-rated at 5%. Homeowners and tenants are not normally able to recover this VAT, so it should be included in the project budget from the start.
Generally yes. VAT is usually due when the contractor receives an advance payment, so a deposit should carry 5% VAT and be supported by a tax invoice. The VAT on later stage payments is then calculated on each stage.
Ask for their TRN, which should appear on quotations and invoices, and check that the name matches the trade license. The Federal Tax Authority provides an online TRN verification service where you can confirm a number is valid.
A VAT-registered business can usually recover input VAT on fit-out costs that relate to its taxable activities, provided it holds valid tax invoices addressed to the business. Exempt activities and mixed use may restrict recovery, so confirm with your adviser.

Sources

Was this article helpful?

Get new articles by email

Practical tips now and then. Confirm by email, unsubscribe any time.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving