Summer offer: 20% OFF AC deep cleaning — book before 30 JuneBook now
Skip to content

Restaurant Fit-Out Cost in Dubai: What Owners Really Pay

What restaurant owners in Dubai really pay for a fit-out in 2026: indicative cost per sq ft by concept, kitchen and MEP costs, approvals, soft costs and the budget mistakes that sink new F&B openings.

Updated 13 Oct 20267 min read
Restaurant Fit-Out Cost in Dubai: What Owners Really Pay
In this article

Quick answer

What restaurant owners in Dubai really pay for a fit-out in 2026: indicative cost per sq ft by concept, kitchen and MEP costs, approvals, soft costs and the budget mistakes that sink new F&B openings. Concept Indicative fit-out (AED per sq ft, excl.

Key facts

  • A venue on a premium waterfront or hotel location with terrace, bar and statement design can easily exceed AED 6,000,000.
  • Kitchen MEP and extraction (18–25%): exhaust hoods, ductwork to roof or approved discharge point, fresh air make-up, fire-rated duct enclosures and kitchen electrical supply.
  • Fire and life safety (6–10%): sprinklers, kitchen hood fire suppression, alarms, emergency lighting and signage.
  • Plumbing and drainage (6–10%): grease interceptor, floor drains, hot water systems and connections to sinks and dishwashers.
  • HVAC (8–14%): dining area cooling sized for full occupancy and kitchen heat gains.
  • Gas systems (2–5%): LPG or central gas connection, piping, leak detection and certification by approved specialists.

Last updated:

A restaurant fit-out in Dubai in 2026 typically costs around AED 250–450 per sq ft for a casual or quick-service concept, AED 450–800 per sq ft for a full-service casual dining restaurant and AED 800–1,500 per sq ft or more for a fine-dining or destination venue, excluding 5% VAT, kitchen equipment and loose furniture in some cases. These are indicative ranges. The real restaurant fit-out cost in Dubai depends on whether you take a shell and core unit or a second-generation restaurant, the size of the kitchen, the extraction route and the level of design.

New restaurant owners are often surprised by how much of the budget goes into things guests never see: kitchen exhaust, grease traps, gas systems, fire suppression and the approvals that sit around them. This guide explains where the money actually goes, so you can build a realistic budget before you sign a lease.

Restaurant fit-out cost in Dubai by concept

ConceptIndicative fit-out (AED per sq ft, excl. VAT)Kitchen equipment (typical range)Example size
Kiosk or food court unit300–600AED 60,000–200,000200–500 sq ft
Quick-service or café250–450AED 120,000–350,000800–1,800 sq ft
Casual dining450–800AED 250,000–700,0002,000–4,000 sq ft
Fine dining or destination venue800–1,500+AED 600,000–2,000,000+3,000–8,000 sq ft

For a 2,500 sq ft casual dining restaurant in JLT, Dubai Hills or Al Barsha, a typical all-in budget including fit-out, kitchen equipment, furniture, design and approvals might land between AED 1,600,000 and AED 2,800,000. A venue on a premium waterfront or hotel location with terrace, bar and statement design can easily exceed AED 6,000,000.

Where the money goes

For a casual dining restaurant taken from shell and core, an indicative split of the fit-out budget looks like this:

  • Kitchen MEP and extraction (18–25%): exhaust hoods, ductwork to roof or approved discharge point, fresh air make-up, fire-rated duct enclosures and kitchen electrical supply.
  • Fire and life safety (6–10%): sprinklers, kitchen hood fire suppression, alarms, emergency lighting and signage.
  • Plumbing and drainage (6–10%): grease interceptor, floor drains, hot water systems and connections to sinks and dishwashers.
  • HVAC (8–14%): dining area cooling sized for full occupancy and kitchen heat gains.
  • Gas systems (2–5%): LPG or central gas connection, piping, leak detection and certification by approved specialists.
  • Interior finishes and joinery (20–30%): flooring, wall finishes, ceilings, banquettes, bar counter, service stations and toilets.
  • Lighting and electrical (6–10%): decorative and functional lighting, power, DB and lighting control.
  • Design, approvals and project management (6–10%).
  • Contingency (8–12%).

The kitchen: the most expensive room

The commercial kitchen is where most restaurant budgets are won or lost. Stainless steel equipment, hoods, walk-in chillers and freezers, dishwashing systems and prep counters all need to be coordinated with drainage, power and extraction. Costs rise quickly with menu complexity: a menu built around a charcoal grill, tandoor or wood-fired oven needs special extraction and fire precautions. A concept with a small menu and finishing kitchen can save hundreds of thousands of dirhams compared with a full-scratch kitchen.

Extraction route

The single biggest variable in many units is how kitchen exhaust leaves the building. A unit with an existing approved exhaust shaft to the roof is far cheaper to fit out than one where a new route must be built, sometimes through several floors or along the facade. Before signing a lease, ask the landlord for drawings of the exhaust provision and confirm it suits your cooking style.

Shell and core vs second-generation restaurants

Taking over a unit that was previously a restaurant, often called second-generation space, can cut fit-out cost dramatically if the kitchen extraction, grease trap, gas and drainage can be reused. The savings can be 30–50% of the MEP budget. However, older systems must be inspected, cleaned and possibly upgraded to current requirements, and the previous layout may not suit your concept. Have a fit-out contractor or MEP engineer inspect the unit before agreeing key money or a lease.

Approvals for restaurants in Dubai

Restaurants require more approvals than offices or shops. Typical steps include landlord or mall design approval, Dubai Municipality food safety requirements for layout and finishes, building permit for the fit-out, Dubai Civil Defence approval for fire and life safety including kitchen suppression and gas, and DEWA for electrical load changes. Free zone and Trakhees areas have their own authorities. Requirements change over time, and approval of the kitchen layout from a food safety point of view should be confirmed early because it affects drainage and finishes. Ask the authority or your fit-out consultant for current fees and documents. Our article on restaurant fit-out requirements and process walks through the steps.

Soft costs owners forget

  • Key money or premium paid to take over a lease.
  • Rent during fit-out if a rent-free period is not negotiated.
  • Landlord and mall fees including design review, fit-out deposit and service charges during works.
  • Small wares and tableware: plates, glassware, cutlery and utensils, often AED 40,000–150,000.
  • POS, music and IT systems.
  • Signage inside the unit and on the facade, subject to approval.
  • Pre-opening staff costs for training and trial service.
  • Licenses and permits for trade, food and, where relevant, outdoor seating.

Timeline for a restaurant fit-out

A typical casual dining restaurant takes four to eight weeks for concept and detailed design, four to ten weeks for approvals, and ten to sixteen weeks on site, followed by inspections and permits to open. Kitchen equipment and imported furniture often have lead times of eight to fourteen weeks, so orders must be placed during the approval stage. Plan for five to eight months from lease signing to opening for most new restaurants.

Budget mistakes that sink F&B openings

  1. Underestimating MEP. Owners budget for beautiful interiors and run out of money for extraction and fire suppression.
  2. Late kitchen design. If the kitchen is designed after the dining room, drainage and duct routes clash with ceilings and finishes.
  3. No contingency. Restaurants almost always find site surprises such as slab levels, drainage depth or inadequate power.
  4. Ignoring outdoor seating rules. Terraces in Dubai Marina, JBR, City Walk or Downtown need separate approvals and shading, cooling and furniture that withstand heat and humidity.
  5. Over-designing the first site. A strong concept with controlled fit-out spend gives better cash flow in the critical first year.

Choosing finishes for Dubai restaurants

Finishes must survive heavy cleaning, grease and constant traffic. Kitchens need non-slip, impervious flooring with coved skirtings, washable wall cladding and ceilings suitable for food areas. In dining areas, porcelain, sealed concrete and commercial vinyl outperform natural wood near entrances, and upholstery should be commercial-grade and easy to clean. Terraces need UV-stable furniture, rust-resistant fixings and shading designed for summer sun.

Mall restaurants vs street and community locations

Where your restaurant sits changes both the fit-out cost and the process. In large malls such as those in Downtown, Al Barsha, Deira and Dubai Hills, landlords normally provide detailed fit-out guidelines covering shopfront design, materials, kitchen extraction, working hours and contractor rules. Design review is thorough and may involve several rounds of comments. Mall work is often done at night, which increases labor cost, and landlords commonly require specific approved contractors for certain systems such as fire alarm tie-ins.

Street-front and community locations, such as those in JLT clusters, Jumeirah, Al Wasl, JVC or Dubai Silicon Oasis, usually allow daytime work and simpler shopfront design. However, they may come with less base-building provision. You may need to arrange your own extraction route, upgrade power supply or build a grease trap from scratch. Outdoor seating can be a major revenue driver in these locations, but it requires separate permission and investment in shading, misting or cooling and robust furniture.

Hotel restaurants follow the hotel operator's brand standards and often have higher specification requirements for acoustics, finishes and back-of-house, but can benefit from shared services such as central kitchens and loading bays.

A sample budget for a 2,500 sq ft casual dining restaurant

The following indicative 2026 example assumes a shell and core unit in a community retail center, with an existing exhaust shaft available. It is not a quotation.

  • Design, approvals and project management: AED 120,000–220,000.
  • Kitchen MEP, extraction and fire suppression: AED 300,000–520,000.
  • HVAC, plumbing, drainage and gas: AED 220,000–380,000.
  • Interior finishes, joinery, bar and toilets: AED 380,000–700,000.
  • Lighting and electrical: AED 100,000–180,000.
  • Kitchen equipment: AED 250,000–550,000.
  • Loose furniture and small wares: AED 150,000–300,000.
  • Contingency: AED 120,000–250,000.

That gives a total of roughly AED 1.64–3.1 million before VAT, licenses, rent and pre-opening costs. The wide range reflects real differences in concept, menu and materials, which is why an early cost plan based on your actual unit is so important.

Key takeaways

  • Indicative 2026 restaurant fit-out cost in Dubai: AED 250–450 per sq ft quick-service, AED 450–800 casual dining, AED 800–1,500+ fine dining, excluding VAT and usually kitchen equipment.
  • Kitchen extraction, fire suppression, gas and drainage often take a third of the budget.
  • A second-generation restaurant unit can save significantly if existing systems can be reused.
  • Allow five to eight months from lease to opening, and keep an 8–12% contingency.

Talk to a restaurant fit-out team

FIXORA Decor fits out restaurants, cafés and kiosks across Dubai, coordinating kitchen MEP, approvals and interiors under one contract. Share your unit plan and concept on WhatsApp +971501962136 or request a fit-out estimate before you sign your lease.

The information in this article is general guidance, not advice for your specific project. See our Terms.

Frequently asked questions

Fit-out alone typically runs AED 250–450 per sq ft for quick-service and AED 450–800 per sq ft for casual dining in 2026, excluding VAT. Adding kitchen equipment, furniture, design, approvals and pre-opening costs, a 2,500 sq ft casual restaurant often needs AED 1.6–2.8 million in total. These are indicative ranges.
Often yes. If the extraction, grease trap, gas and drainage can be reused, a second-generation unit can save 30–50% of the MEP budget. Have the systems inspected before agreeing key money or signing the lease.
Typically landlord or mall approval, Dubai Municipality food safety and building requirements, Dubai Civil Defence approval for fire safety, kitchen suppression and gas, and DEWA for load changes. Free zones and Trakhees areas have their own processes. Check current requirements with each authority.
Allow four to eight weeks for design, four to ten weeks for approvals and ten to sixteen weeks on site. Most new restaurants open five to eight months after the lease is signed.
The kitchen and its MEP systems, especially exhaust extraction, fire suppression, gas, drainage and the grease interceptor. A difficult extraction route can add significantly to cost.
Food outlets are generally required to install a grease interceptor sized for their kitchen. Confirm the current specification with the authority and landlord during design.

Sources

Was this article helpful?

Get new articles by email

Practical tips now and then. Confirm by email, unsubscribe any time.

Need help with your project?

Our team is ready to help — get a free quotation today.

Or call us+971 50 196 2136

Serving