In this article
Quick answer
Office fit-out cost in Dubai for 2026: indicative AED per sq ft rates for basic, mid-range and premium CAT B fit-outs, what is excluded, a worked budget example, timelines and ways to save. They depend on scope and are confirmed only after a site survey and an itemised BOQ.
Key facts
- Fit-out cost benchmarks per sq ft (2026)
- Loose furniture: workstations, chairs and storage often add around AED 25–80 per sq ft depending on specification.
- IT, AV and security: structured cabling, screens, video conferencing and access control often add around AED 20–70 per sq ft.
- VAT at 5% , which applies to the contract value.
- Worked example: a 3,000 sq ft office
- To show how the bands translate into a budget, here is simple arithmetic for a 3,000 sq ft CAT A unit at mid-range finish.
Last updated:
Office fit-out cost in Dubai in 2026 typically falls between AED 180 and 250 per sq ft for a basic CAT B fit-out, AED 250–400 for mid-range and AED 400–700 or more for premium executive space. These are indicative ranges, excluding 5% VAT, and the final figure depends on the base condition of the space, the finish level and how much MEP work is needed.
The most common question we hear at FIXORA is simple: "How much will it cost?" The honest answer depends on scope, finish level and building conditions, but this guide gives you 2026 benchmarks, explains what moves the number up or down, and shows how to budget with confidence before you sign a lease or a contract.
Fit-out cost benchmarks per sq ft (2026)
The figures below are typical, indicative 2026 ranges for CAT B fit-out of a space that already has CAT A services. They depend on scope and are confirmed only after a site survey and an itemized BOQ.
| Finish level | AED / sq ft (indicative) | Typical scope |
|---|---|---|
| Basic | 180 – 250 | Gypsum partitions, carpet tiles, standard lighting, paint, basic pantry |
| Mid-range | 250 – 400 | Glass partitions, SPC/LVT flooring, feature ceilings, branded reception, meeting-room AV |
| Premium | 400 – 700+ | Bespoke joinery, stone, acoustic systems, smart lighting, executive suites |
A light refresh that reuses most of an existing fit-out, such as new carpet, paint and a few partitions, can come in below the basic band. At the other end, trading floors, labs and fully bespoke headquarters can exceed the premium band.
What these rates usually exclude
- Shell and core to CAT A works: if the space has no ceilings, AC distribution or fire services, bringing it to CAT A is a separate cost, commonly in the region of AED 60–120 per sq ft on an indicative basis.
- Loose furniture: workstations, chairs and storage often add around AED 25–80 per sq ft depending on specification.
- IT, AV and security: structured cabling, screens, video conferencing and access control often add around AED 20–70 per sq ft.
- Authority and landlord fees, deposits and service charges during the works.
- VAT at 5%, which applies to the contract value.
If you are unsure which category your space is in, our explainer on shell and core vs Category A vs Category B fit-out sets out what each stage includes.
Worked example: a 3,000 sq ft office
To show how the bands translate into a budget, here is simple arithmetic for a 3,000 sq ft CAT A unit at mid-range finish. It is an illustration, not a quotation.
| Item | Basis | Indicative range (AED, excl. VAT) |
|---|---|---|
| CAT B fit-out, mid-range | 3,000 sq ft × 250–400 | 750,000 – 1,200,000 |
| Loose furniture | 3,000 sq ft × 25–80 | 75,000 – 240,000 |
| IT, AV and access control | 3,000 sq ft × 20–70 | 60,000 – 210,000 |
| Contingency | about 10% of fit-out | 75,000 – 120,000 |
The spread is wide because two offices of the same size can have very different needs. A sales office with mostly open workstations sits at the lower end; a consultancy with many enclosed rooms, glass partitions and video-conferencing rooms sits higher.
What drives the price
- Building condition: shell and core needs full MEP; CAT A spaces already have ceilings and AC, so the budget goes into layout and finishes instead.
- Approvals: Dubai Municipality, DDA, Trakhees or free-zone NOCs add 1–3 weeks and fees. Fire and life safety changes usually also need Dubai Civil Defence approval.
- MEP density: server rooms, extra FCUs and fire-safety modifications are the biggest hidden costs. Every new enclosed room may need its own supply, return, sprinkler and smoke detection.
- Joinery: custom reception desks and storage walls are premium items; modular alternatives cut 30–40%.
- Ratio of enclosed rooms to open plan: partitions, doors, glazing and the MEP inside each room add up quickly.
- Acoustics: meeting rooms and phone booths need partitions taken up to the slab or acoustic treatment to stop sound traveling.
- Building rules: towers that only allow noisy work after hours or at weekends increase labor cost and extend the program.
- Lead times: imported finishes and furniture can force expensive substitutions if ordered late.
How costs differ by location and building type
The location changes the process more than the base rate. Grade A towers in DIFC, Downtown and Business Bay tend to have strict landlord fit-out manuals, approved contractor lists and after-hours working rules. Free-zone offices in places such as JLT, Dubai Media City or Dubai Silicon Oasis follow the relevant free-zone authority or master developer process. Warehouse-to-office conversions in Al Quoz or industrial areas often need more base-build work, such as insulation, new ceilings and AC, before any office finishes go in.
For a sense of scope on a real project, see our Business Bay office floor fit-out for an engineering consultancy. For approvals in DDA-managed districts, our DDA fit-out approval guide walks through the process, and the Civil Defence approval guide covers fire and life safety.
Hidden costs owners often miss
Many fit-out budgets are set from the per sq ft rate alone and then stretched by items nobody priced at the start. Check whether your budget covers:
- Landlord and building charges: fit-out deposits, after-hours security, lift protection and service lift bookings.
- Design and engineering fees: MEP drawings and calculations needed for authority submissions.
- Fire and life safety changes: relocating sprinklers and smoke detectors to suit new rooms, plus testing and inspection.
- Supplementary cooling: dedicated units for server rooms and busy meeting rooms.
- Signage and branding: reception logos, manifestation on glass and wayfinding.
- Moving costs: removals, IT migration and temporary storage.
- End-of-lease reinstatement on your current office. Our guide to office reinstatement works explains what landlords usually expect.
Choosing finishes that last in Dubai offices
Spending a little more in the right places reduces running costs over a typical lease. Dust and fine sand reach offices even in sealed towers, so carpet tiles are easier to maintain than broadloom because damaged tiles can be swapped individually. In pantries and washrooms, moisture-resistant boards and porcelain perform better than cheaper alternatives. Glass-heavy layouts look bright but can create echo, so plan acoustic ceiling tiles, wall panels or soft furnishings from the start; our article on acoustic design for open-plan offices covers practical options. On west-facing façades, solar film or blinds help keep AC load and glare under control.
Realistic timeline
- Design & 3D concept: 1–2 weeks
- Authority approvals: 1–3 weeks
- Construction: 4–8 weeks
- Snagging & handover: 3–5 days
For a typical 1,500–3,000 sq ft office, that adds up to roughly 5–8 weeks on site after design approval and permits. Larger floors, heavy MEP changes or landlord restrictions on working hours extend this. The step-by-step guide to the office fit-out process in Dubai explains what happens in each phase.
Plan around your lease
- Negotiate a rent-free fit-out period that matches a realistic program, including approvals.
- Check the reinstatement clause: some leases require you to return the space to shell or CAT A at the end, which is a future cost to budget for.
- Ask the landlord for the fit-out guidelines and base-build drawings before you commission design.
Five ways to save without compromising quality
- Reuse existing ceiling grids and AC ducting where compliant.
- Choose SPC or LVT flooring over stone in high-traffic zones.
- Standardize workstation joinery and invest in the reception and meeting rooms instead.
- Phase the project: fit out floors sequentially to avoid business downtime.
- Get an itemized BOQ so you can compare like-for-like quotations.
Other practical savings
- Keep wet areas such as pantries and washrooms close to existing drainage points.
- Use glass partitions selectively; a mix of glass and solid walls is often cheaper and better acoustically.
- Choose LED lighting with simple controls rather than complex scene systems in general areas.
- Freeze the layout before construction starts, because late changes are the most expensive line in any fit-out.
How to read and compare quotations
A lump-sum figure on one page tells you very little. Ask every contractor to price the same drawings and specification and to break the BOQ into preliminaries, partitions, ceilings, flooring, joinery, MEP, fire services, finishes and approvals. Then check what is excluded, such as furniture, IT, authority fees or after-hours premiums. Our guide on how to read a BOQ quotation shows what to look for line by line.
Questions to ask before you sign
- Is the price fixed for the stated scope, and how are variations valued?
- Who prepares and submits the authority and landlord applications?
- What is the payment schedule and is there retention until snags are closed?
- Which items have long lead times, and when must they be ordered?
- What documentation will we receive at handover?
Key takeaways
- Indicative 2026 CAT B rates are AED 180–250 per sq ft basic, 250–400 mid-range and 400–700+ premium, excluding VAT.
- Shell and core works, furniture, IT and AV are usually extra, so budget for them separately.
- MEP density and the number of enclosed rooms are the biggest cost drivers.
- Allow 1–3 weeks for approvals and roughly 5–8 weeks of construction for a typical small to mid-size office.
- An itemized BOQ is the only reliable way to compare quotations.
Get a fit-out quotation from FIXORA Decor
Ready to get a fixed-price quotation? FIXORA Decor handles design, approvals and construction under one contract through our turnkey fit-out service. Request a quote and free site visit, call +971 50 196 2136 or message our fit-out team on WhatsApp at +971501962136, and we'll share a BOQ within 48 hours.
The information in this article is general guidance, not advice for your specific project. See our Terms.
Frequently asked questions
Sources
Was this article helpful?
Get new articles by email
Practical tips now and then. Confirm by email, unsubscribe any time.



